Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Average intensity and contrast of light amplified by a partially homogeneously broadened, slightly saturated laser amplifier with stochastic gain distributions

Chuan Choong Yang

Published May 1, 1988• 6 citations
Publisher

Abstract

We evaluate the average intensity and contrast of the output of a laser amplifier in which stochastic gain distributions exist. This situation occurs when turbulence flows are developed in a gas- or liquid-laser amplifier. The gain medium is assumed to be partially homogeneously broadened and slightly saturated and to consist of two-level atoms. In our computations, a plane wave is propagated through the gain medium with weak turbulences, under the assumption that the size of the first Fresnel zone is much smaller than the characteristic length of turbulences.

DOI
10.1364/ol.13.000366

Related papers

Statistics of laser intensity after passing through an amplifier with stochastic gain distributions

Jenn‐Hwan Tarng, Chuan Choong Yang

Statistical moments of laser intensity passing through an amplifier with stochastic gain are evaluated. This situation happens when turbulent flows exist in the gain medium, which is assumed to be a two-level atomic system. Also, it is assumed that the turbulence structure is fully characterized by a stochastic process. This gain medium is assumed to be partially homogeneously broadened and slightly saturated. In the derivations, the paraxial approximation is combined with the perturbation method to solve for the random laser field inside the amplifier. For mathematical simplicity, a plane wave is propagated through the gain medium which contains only weak turbulence fluctuations. Dependences of the average laser intensity and contrast on turbulence fluctuation strength, characteristic length of the turbulence, and gain saturation and numerically demonstrated. It is found that the turbulence fluctuations make both average intensity and contrast stronger. Also, the gain saturation reduces both average intensity and contrast. In addition, it is shown that the contrast increases as the characteristic length of turbulence is increased.>

IEEE Journal of Quantum Electronics•Jan 1, 1989•1 citation

Understanding the characteristics of gain saturation for homogeneously broadened laser medium from the point of view of the bandwidth

Geguo Du

It is very important to understand the characteristics of gain saturation for homogeneously broadened laser medium. Assuming a Lorentzian lineshape function with a linewidth of ΔνH, we have derived the analytical functions of the gain coefficient under three different conditions: 1) a small and 2) a large signal incident on the medium respectively, and 3) a small signal accompanied by a large signal simultaneously incident on the medium. We have found that the bandwidth Δν of the gain coefficient is equal to the linewidth ΔνH for condition 1) and 3) while it is Δ ν = 1 + I ν 1 / I s Δ ν H for condition 2). Here, I v 1 and Is are the intensity of the large signal and the saturation intensity at the center frequency Vo, respectively. The reasons are also presented for such results. For condition 2), gain saturation effect is strongly dependent on the frequency of the large signal: the more the frequency deviates from the center frequency, the weaker the gain saturation effect. This results an increase of the bandwidth. For condition 3), the intensity of the large signal only changes the distribution of populations on the upper and lower energy levels. Hence, the shape of the gain coefficient does not change with the gain reduction of the small signal, thus, its bandwidth remains the same.

Education and Training in Optics and Photonics•Jan 1, 2007•0 citations

Amplified-spontaneous-emission intensity fluctuations

N. B. Abraham, John C. Huang, David A. Kranz +1 more

Intensity fluctuation characteristics of amplified-spontaneous emission are found using intensity rate equations and the noise-amplifier approximation for saturation coupling between two and four competing modes. The existence of more than one mode leads to the retention of relatively large fluctuations in each mode even as the amplifier gain is saturated, an operating regime which by contrast has been shown to reduce significantly the fluctuations when only a single beam is present. The noise-amplifier approximation is found to be an adequate approximation of the effects of the spontaneous emission distributed along the length of a laser amplifier. The intensity fluctuations in all cases approach limiting distributions functions as the amplifier becomes heavily saturated. Characteristics of these limiting distributions are found for one, two, and four beams; for combinations of beams copropagating and counterpropagating; in the presence and absence of loss; for differences in gain; and for saturation of the sources due to high intensities.

Physical Review A•Nov 1, 1981•14 citations

Understanding the characteristics of gain saturation for homogeneously broadened laser medium from the point of view of the bandwidth

Geguo Du

It is very important to understand the characteristics of gain saturation for homogeneously broadened laser medium. Assuming a Lorentzian lineshape function with a linewidth of ΔνH, we have derived the analytical functions of the gain coefficient under three different conditions: 1) a small and 2) a large signal incident on the medium respectively, and 3) a small signal accompanied by a large signal simultaneously incident on the medium. We have found that the bandwidth Δν of the gain coefficient is equal to the linewidth ΔνH for condition 1) and 3) while it is Δν = √1+Iν1 / IsΔνH for condition 2). Here, Iν1 and Is are the intensity of the large signal and the saturation intensity at the center frequency ν0, respectively. The reasons are also presented for such results. For condition 2), gain saturation effect is strongly dependent on the frequency of the large signal: the more the frequency deviates from the center frequency, the weaker the gain saturation effect. This results an increase of the bandwidth. For condition 3), the intensity of the large signal only changes the distribution of populations on the upper and lower energy levels. Hence, the shape of the gain coefficient does not change with the gain reduction of the small signal, thus, its bandwidth remains the same.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 3, 2015•0 citations

Laser Amplifiers

Bahaa E. A. Saleh, Malvin Carl Teich

A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.

Wiley eBooks•Aug 14, 1991•2 citations

Gain, dispersion, and emission characteristics of three-level molecular laser amplifier and oscillator systems

J. S. Uppal, Robert G. Harrison, Jerome V. Moloney

Interaction of two coherent fields of arbitrary intensity with a general homogeneously broadened three-level molecular system for both an amplifier as well as a laser oscillator under general conditions of pumping is discussed. The amplifier solution is obtained through the time-averaged density-matrix formalism with two coherent fields treated classically. A detailed consideration of both real and imaginary parts of the electric susceptibility at pump and emission frequencies, corresponding to gain and dispersion in the active medium has been taken into account. The results obtained are used to study a number of situations for weak and strong pumping in the laser amplifier. Subsequently these are applied to a mode analysis of a unidirectional single-mode laser oscillator to determine the output characteristics of the laser and to establish conditions under which emission becomes dynamically unstable resulting in sustained oscillatory emission. The results obtained are found to be in good agreement with those of a full numerical analysis of the atomic and field coupled equations describing the system.

Physical Review A•Nov 1, 1987•31 citations
We evaluate the average intensity and contrast of the output of a laser amplifier in which stochastic gain distributions exist. This situation occurs when turbulence flows are developed in a gas- or liquid-laser amplifier. The gain medium is assumed to be partially homogeneously broadened and slightly saturated and to consist of two-level atoms. In our computations, a plane wave is propagated through the gain medium with weak turbulences, under the assumption that the size of the first Fresnel zone is much smaller than the characteristic length of turbulences.
Statistical moments of laser intensity passing through an amplifier with stochastic gain are evaluated. This situation happens when turbulent flows exist in the gain medium, which is assumed to be a two-level atomic system. Also, it is assumed that the turbulence structure is fully characterized by a stochastic process. This gain medium is assumed to be partially homogeneously broadened and slightly saturated. In the derivations, the paraxial approximation is combined with the perturbation method to solve for the random laser field inside the amplifier. For mathematical simplicity, a plane wave is propagated through the gain medium which contains only weak turbulence fluctuations. Dependences of the average laser intensity and contrast on turbulence fluctuation strength, characteristic length of the turbulence, and gain saturation and numerically demonstrated. It is found that the turbulence fluctuations make both average intensity and contrast stronger. Also, the gain saturation reduces both average intensity and contrast. In addition, it is shown that the contrast increases as the characteristic length of turbulence is increased.>
It is very important to understand the characteristics of gain saturation for homogeneously broadened laser medium. Assuming a Lorentzian lineshape function with a linewidth of ΔνH, we have derived the analytical functions of the gain coefficient under three different conditions: 1) a small and 2) a large signal incident on the medium respectively, and 3) a small signal accompanied by a large signal simultaneously incident on the medium. We have found that the bandwidth Δν of the gain coefficient is equal to the linewidth ΔνH for condition 1) and 3) while it is Δ ν = 1 + I ν 1 / I s Δ ν H for condition 2). Here, I v 1 and Is are the intensity of the large signal and the saturation intensity at the center frequency Vo, respectively. The reasons are also presented for such results. For condition 2), gain saturation effect is strongly dependent on the frequency of the large signal: the more the frequency deviates from the center frequency, the weaker the gain saturation effect. This results an increase of the bandwidth. For condition 3), the intensity of the large signal only changes the distribution of populations on the upper and lower energy levels. Hence, the shape of the gain coefficient does not change with the gain reduction of the small signal, thus, its bandwidth remains the same.
Intensity fluctuation characteristics of amplified-spontaneous emission are found using intensity rate equations and the noise-amplifier approximation for saturation coupling between two and four competing modes. The existence of more than one mode leads to the retention of relatively large fluctuations in each mode even as the amplifier gain is saturated, an operating regime which by contrast has been shown to reduce significantly the fluctuations when only a single beam is present. The noise-amplifier approximation is found to be an adequate approximation of the effects of the spontaneous emission distributed along the length of a laser amplifier. The intensity fluctuations in all cases approach limiting distributions functions as the amplifier becomes heavily saturated. Characteristics of these limiting distributions are found for one, two, and four beams; for combinations of beams copropagating and counterpropagating; in the presence and absence of loss; for differences in gain; and for saturation of the sources due to high intensities.
It is very important to understand the characteristics of gain saturation for homogeneously broadened laser medium. Assuming a Lorentzian lineshape function with a linewidth of ΔνH, we have derived the analytical functions of the gain coefficient under three different conditions: 1) a small and 2) a large signal incident on the medium respectively, and 3) a small signal accompanied by a large signal simultaneously incident on the medium. We have found that the bandwidth Δν of the gain coefficient is equal to the linewidth ΔνH for condition 1) and 3) while it is Δν = √1+Iν1 / IsΔνH for condition 2). Here, Iν1 and Is are the intensity of the large signal and the saturation intensity at the center frequency ν0, respectively. The reasons are also presented for such results. For condition 2), gain saturation effect is strongly dependent on the frequency of the large signal: the more the frequency deviates from the center frequency, the weaker the gain saturation effect. This results an increase of the bandwidth. For condition 3), the intensity of the large signal only changes the distribution of populations on the upper and lower energy levels. Hence, the shape of the gain coefficient does not change with the gain reduction of the small signal, thus, its bandwidth remains the same.
A coherent optical amplifier is a device that increases the amplitude of an optical field while maintaining its phase. If the optical field at the input to such an amplifier is monochromatic, the output will also be monochromatic, with the same frequency. The output amplitude is increased relative to the input while the phase is unchanged or shifted by a fixed amount. In contrast, an amplifier that increases the intensity of an optical wave without preserving the phase is called an incoherent optical amplifier. This chapter is concerned with coherent optical amplifiers. Such amplifiers are important for various applications; examples include the amplification of weak optical pulses such as those that have traveled through a long length of optical fiber, and the production of highly intense optical pulses such as those required for laser-fusion applications. Furthermore, it is important to understand the principles underlying the operation of optical amplifiers as a prelude to the discussion of optical oscillators. Light transmitted through matter in thermal equilibrium is attenuated rather than amplified. This is because absorption by the large population of atoms in the lower energy level is more prevalent than stimulated emission by the smaller population of atoms in the upper level. An essential ingredient for achieving laser amplification is the presence of a greater number of atoms in the upper energy level than in the lower level, which is clearly a nonequilibrium situation. Achieving such a population inversion requires a source of power to excite (pump) the atoms into the higher energy level. Although the presentation throughout this chapter is couched in terms of “atoms” and “atomic levels,” these appelations are to be more broadly understood as “active medium” and “laser energy levels,” respectively. The properties of an ideal (optical or electronic) coherent amplifier are displayed schematically. Real coherent amplifiers deliver a gain and phase shift that are frequency dependent, typically in the manner illustrated here. The gain and phase shift constitute the amplifier's transfer function. For a sufficiently high input amplitude, furthermore, real amplifiers may exhibit saturation, a form of nonlinear behavior in which the output amplitude fails to increase in proportion to the input amplitude. Saturation introduces harmonic components into the output, provided that the amplifier bandwidth is sufficiently broad to pass them. Real amplifiers also introduce noise, so that a randomly fluctuating component is always present at the output, regardless of the input. An amplifier may therefore be characterized by the following features: ▪ gain; ▪ bandwidth; ▪ phase shift; ▪ power source; ▪ nonlinearity and gain saturation, and ▪ noise We proceed to discuss these characteristics in turn in this chapter. The theory of laser amplification is developed, leading to expressions for the amplifier gain, spectral bandwidth, and phase shift. The mechanisms by which an amplifier power source can achieve a population inversion are examined. Gain saturation and noise in the amplification process, are discussed respectively. This chapter relies on material presented in Chap. 12.
Interaction of two coherent fields of arbitrary intensity with a general homogeneously broadened three-level molecular system for both an amplifier as well as a laser oscillator under general conditions of pumping is discussed. The amplifier solution is obtained through the time-averaged density-matrix formalism with two coherent fields treated classically. A detailed consideration of both real and imaginary parts of the electric susceptibility at pump and emission frequencies, corresponding to gain and dispersion in the active medium has been taken into account. The results obtained are used to study a number of situations for weak and strong pumping in the laser amplifier. Subsequently these are applied to a mode analysis of a unidirectional single-mode laser oscillator to determine the output characteristics of the laser and to establish conditions under which emission becomes dynamically unstable resulting in sustained oscillatory emission. The results obtained are found to be in good agreement with those of a full numerical analysis of the atomic and field coupled equations describing the system.