Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Journal of Solid-State Circuits

A 60-GHz NbN single-flux quantum counter circuit

J.W. Spargo, JD Cooper, G.E. Kerber, G.R. King, Richard Morris, A.G. Toth

Published Jun 1, 1991• 3 citations
Publisher

Abstract

A Josephson binary counter using single-flux quanta transitions of DC SQUIDs (superconducting quantum interference devices) has been fabricated using an eight-level NbN-based process. High-speed binary division has been demonstrated at 4.2 K, with single-cell counting observed at 60 GHz using the Josephson voltage-to-frequency relationship. Count rate was primarily limited by conservative process and design rules. The counter was designed for operation at 4.2 K. At 8-10 K, the beta /sub L/ of the SQUIDs would not allow operation, though the junction characteristics were good.>

DOI
10.1109/4.78279

Related papers

A high performance Josephson binary counter implemented in Nb and NbN technology

Stephen R. Whiteley, F. Kuo

A Josephson binary counter with nondestructive readout has been implemented and tested in both niobium and niobium nitride technology. Successful operation of the Nb version has been observed. The design incorporates an additional tapered-edge SiO/sub 2/ level in the Nb processing sequence, which increases interferometer inductance, decreases capacitance, and ensures that geometric resonances are as high in frequency as possible. This level has the added advantage of providing mask compatibility with the NbN process, as this level is skipped in the NbN flow, thereby compensating in part for the larger penetration depth of NbN. The counter cell is designed to be as compact as possible to minimize stray inductance and maximize top count rate and high count rate bias margins. A novel readout SQUID coupling layout that allows low read SQUID inductance and requires no holes in the groundplane is used. Coupling to the adjacent count SQUID is provided by a common control line level metallization, which directs count SQUID flux through the read SQUID loop. Nb versions of the circuit functioned as expected, but low device yield limited the longest chain of functioning stages to five. The NbN circuits did not function due to higher than predicted inductance values.

IEEE Transactions on Magnetics•Mar 1, 1991•0 citations

A fast Josephson SFQ shift register

F. Kuo, Stephen R. Whiteley, S. M. Faris

A Josephson SFQ (single flux quantum) shift register circuit operating under a two-phase power was designed and tested. The test cell was fabricated using the Nb/AlO/sub x//Nb junction SNEAP process. The main data latch is DC biased; the data storage is accomplished by the transfer of a single flux quantum in or out of a SQUID (superconducting quantum interference device) superconducting loop. A two-phase sinusoidal clock with offset is used to operate the circuit. Simulations verify that the operating frequency can go beyond 70 GHz, with operating margins exceeding 20%. Preliminary measurements indicate that the circuit operates as intended.>

IEEE Transactions on Magnetics•Mar 1, 1989•5 citations

High speed non-latching SQUID binary ripple counter

Arnold H. Silver, R. Phillips, Robert D. Sandell

High speed, single flux quantum (SFQ) binary scalers are important components in superconducting analog-to-digital converters (ADC). This paper reviews the concept for a SQUID ADC and the design of an SFQ binary ripple counter, and reports the simulation of key components, and fabrication and performance of non-latching SQUID scalers and SFQ binary ripple counters. The SQUIDs were fabricated with Nb/Nb2O5/PbIn junctions and interconnected by monolithic-superconducting transmission lines and isolation resistors. Each SQUID functioned as a bistable flip-flop with the input connected to the center of the device and the output across one junction. All junctions were critically damped to optimize the pulse response. Operation was verified by observing the do I-V curves of successive SQUIDs driven by a cw pulse train generated on the same chip. Each SQUID exhibited constant-voltage current steps at 1/2 the voltage of the preceding device as expected from the Josephson voltage-to-frequency relation. Steps were observed only for the same voltage polarity of successive devices and for proper phase bias of the SQUID. Binary frequency division was recorded up to 40GHz for devices designed to operate to 28GHz.

IEEE Transactions on Magnetics•Mar 1, 1985•29 citations

100 GHz Binary counter based on DC SQUID's

C.A. Hamilton, Frances L. Lloyd

A binary counter using bistable dc SQUID's as flip flop circuits is demonstrated. All of the functions: LOAD, COUNT, STORE, READ, and CLEAR can be performed. The use of single flux quantum logic results in high sensitivity (10-18J input pulse energy), high speed (100 GHz count rate) and low power (10-7W at 100 GHz count rate).

IEEE Electron Device Letters•Nov 1, 1982•66 citations

Experimental evaluation of some rapid single flux quantum cells

Ying Ki Kwong, V. Nandakumar

Some basic cells in the rapid single-flux quantum (RSFQ) family of superconductive logic circuits were studied. An input stage, a buffer, and an OR gate were simulated and laid out for a standard niobium-based fabrication process. The resulting circuits perform properly for clock speeds up to 1 GHz. For the simpler circuits tested, the measured margins are wide, consistent with simulations, and not very dependent on clock speed. However, margin decreases with increased circuit complexity. The input stage converts a rising edge into an SFQ pulse, which has a small amplitude and narrow width in time. On the present circuits, these pulses are about 200 mu V in amplitude and 10 ps in width. To facilitate measurement, the authors have chosen as the output an asymmetrical superconducting quantum interference device (SQUID) consisting of two Josephson junctions. It converts SFQ pulses into 2.5 mV latching output levels on chip. By inductively coupling SFQ pulses into the SQUID loop, DC current isolation between the RSFQ circuit-under-test and the output stage is provided. The SQUID was optimized for 2 GHz operations.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•7 citations

High-speed operation of quasi-one junction superconducting quantum interference device based on high-Tc multilayer technology

H. Sugiyama, H. Wakana, Seiji Adachi +2 more

We designed a quasi-one junction superconducting quantum interference device (QOS) based on single-flux-quantum technology using high-Tc superconductors. A circuit containing 10 interface-engineered ramp-edge Josephson junctions was fabricated on a La-substituted YBa2Cu3Oy ground plane. The output voltage as a function of the input current for the QOS indicated correct operation as a periodic comparator at clock frequency of 94 and 77 GHz at 35 and 40 K, respectively. A comparison of the observed maximum operating frequency with the product of the critical current and normal resistance for the junctions suggests that comparator operation above 100 GHz at 40 K is possible if one optimizes the junction parameters.

Applied Physics Letters•Apr 1, 2004•14 citations
A Josephson binary counter using single-flux quanta transitions of DC SQUIDs (superconducting quantum interference devices) has been fabricated using an eight-level NbN-based process. High-speed binary division has been demonstrated at 4.2 K, with single-cell counting observed at 60 GHz using the Josephson voltage-to-frequency relationship. Count rate was primarily limited by conservative process and design rules. The counter was designed for operation at 4.2 K. At 8-10 K, the beta /sub L/ of the SQUIDs would not allow operation, though the junction characteristics were good.>
A Josephson binary counter with nondestructive readout has been implemented and tested in both niobium and niobium nitride technology. Successful operation of the Nb version has been observed. The design incorporates an additional tapered-edge SiO/sub 2/ level in the Nb processing sequence, which increases interferometer inductance, decreases capacitance, and ensures that geometric resonances are as high in frequency as possible. This level has the added advantage of providing mask compatibility with the NbN process, as this level is skipped in the NbN flow, thereby compensating in part for the larger penetration depth of NbN. The counter cell is designed to be as compact as possible to minimize stray inductance and maximize top count rate and high count rate bias margins. A novel readout SQUID coupling layout that allows low read SQUID inductance and requires no holes in the groundplane is used. Coupling to the adjacent count SQUID is provided by a common control line level metallization, which directs count SQUID flux through the read SQUID loop. Nb versions of the circuit functioned as expected, but low device yield limited the longest chain of functioning stages to five. The NbN circuits did not function due to higher than predicted inductance values.
A Josephson SFQ (single flux quantum) shift register circuit operating under a two-phase power was designed and tested. The test cell was fabricated using the Nb/AlO/sub x//Nb junction SNEAP process. The main data latch is DC biased; the data storage is accomplished by the transfer of a single flux quantum in or out of a SQUID (superconducting quantum interference device) superconducting loop. A two-phase sinusoidal clock with offset is used to operate the circuit. Simulations verify that the operating frequency can go beyond 70 GHz, with operating margins exceeding 20%. Preliminary measurements indicate that the circuit operates as intended.>
High speed, single flux quantum (SFQ) binary scalers are important components in superconducting analog-to-digital converters (ADC). This paper reviews the concept for a SQUID ADC and the design of an SFQ binary ripple counter, and reports the simulation of key components, and fabrication and performance of non-latching SQUID scalers and SFQ binary ripple counters. The SQUIDs were fabricated with Nb/Nb2O5/PbIn junctions and interconnected by monolithic-superconducting transmission lines and isolation resistors. Each SQUID functioned as a bistable flip-flop with the input connected to the center of the device and the output across one junction. All junctions were critically damped to optimize the pulse response. Operation was verified by observing the do I-V curves of successive SQUIDs driven by a cw pulse train generated on the same chip. Each SQUID exhibited constant-voltage current steps at 1/2 the voltage of the preceding device as expected from the Josephson voltage-to-frequency relation. Steps were observed only for the same voltage polarity of successive devices and for proper phase bias of the SQUID. Binary frequency division was recorded up to 40GHz for devices designed to operate to 28GHz.
Some basic cells in the rapid single-flux quantum (RSFQ) family of superconductive logic circuits were studied. An input stage, a buffer, and an OR gate were simulated and laid out for a standard niobium-based fabrication process. The resulting circuits perform properly for clock speeds up to 1 GHz. For the simpler circuits tested, the measured margins are wide, consistent with simulations, and not very dependent on clock speed. However, margin decreases with increased circuit complexity. The input stage converts a rising edge into an SFQ pulse, which has a small amplitude and narrow width in time. On the present circuits, these pulses are about 200 mu V in amplitude and 10 ps in width. To facilitate measurement, the authors have chosen as the output an asymmetrical superconducting quantum interference device (SQUID) consisting of two Josephson junctions. It converts SFQ pulses into 2.5 mV latching output levels on chip. By inductively coupling SFQ pulses into the SQUID loop, DC current isolation between the RSFQ circuit-under-test and the output stage is provided. The SQUID was optimized for 2 GHz operations.>
We designed a quasi-one junction superconducting quantum interference device (QOS) based on single-flux-quantum technology using high-Tc superconductors. A circuit containing 10 interface-engineered ramp-edge Josephson junctions was fabricated on a La-substituted YBa2Cu3Oy ground plane. The output voltage as a function of the input current for the QOS indicated correct operation as a periodic comparator at clock frequency of 94 and 77 GHz at 35 and 40 K, respectively. A comparison of the observed maximum operating frequency with the product of the critical current and normal resistance for the junctions suggests that comparator operation above 100 GHz at 40 K is possible if one optimizes the junction parameters.