Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Scientific Reports

Reversible logic gate using adiabatic superconducting devices

Naoki Takeuchi, Yuki Yamanashi, Nobuyuki Yoshikawa

Published Sep 15, 2014• 86 citations
Publisher

Abstract

Reversible computing has been studied since Rolf Landauer advanced the argument that has come to be known as Landauer's principle. This principle states that there is no minimum energy dissipation for logic operations in reversible computing, because it is not accompanied by reductions in information entropy. However, until now, no practical reversible logic gates have been demonstrated. One of the problems is that reversible logic gates must be built by using extremely energy-efficient logic devices. Another difficulty is that reversible logic gates must be both logically and physically reversible. Here we propose the first practical reversible logic gate using adiabatic superconducting devices and experimentally demonstrate the logical and physical reversibility of the gate. Additionally, we estimate the energy dissipation of the gate, and discuss the minimum energy dissipation required for reversible logic operations. It is expected that the results of this study will enable reversible computing to move from the theoretical stage into practical usage.

DOI
10.1038/srep06354

Related papers

Reversibility and energy dissipation in adiabatic superconductor logic

Naoki Takeuchi, Yuki Yamanashi, Nobuyuki Yoshikawa

Reversible computing is considered to be a key technology to achieve an extremely high energy efficiency in future computers. In this study, we investigated the relationship between reversibility and energy dissipation in adiabatic superconductor logic. We analyzed the evolution of phase differences of Josephson junctions in the reversible quantum-flux-parametron (RQFP) gate and confirmed that the phase differences can change time reversibly, which indicates that the RQFP gate is physically, as well as logically, reversible. We calculated energy dissipation required for the RQFP gate to perform a logic operation and numerically demonstrated that the energy dissipation can fall below the thermal limit, or the Landauer bound, by lowering operation frequencies. We also investigated the 1-bit-erasure gate as a logically irreversible gate and the quasi-RQFP gate as a physically irreversible gate. We calculated the energy dissipation of these irreversible gates and showed that the energy dissipation of these gate is dominated by non-adiabatic state changes, which are induced by unwanted interactions between gates due to logical or physical irreversibility. Our results show that, in reversible computing using adiabatic superconductor logic, logical and physical reversibility are required to achieve energy dissipation smaller than the Landauer bound without non-adiabatic processes caused by gate interactions.

Scientific Reports•Feb 28, 2017•31 citations

Extremely Energy-Efficient Integrated Circuits Using Adiabatic Superconductor Logic

尚輝 竹内

Complementary metal-oxide-semiconductor (CMOS) circuit technology has sustainedthe exponential growth of computing power for more than 20 years. However, it hasbeen estimated that the power consumption of a next-generation supercomputer willexceed the power supplied from a single power plant. This indicates the need to dramaticallyimprove the energy efficiency of logic devices to achieve future high-endcomputers.As an extremely energy-efficient logic, we proposed and have been investigatingadiabatic quantum-flux-parametron (AQFP) devices. Due to adiabatic switching operations,its bit energy (energy dissipation per bit) can go below Ic 0, where Ic is acritical current of a Josephson junction and 0 is a single-flux-quantum (SFQ). Ic 0corresponds to the energy dissipated at every 2 phase transition in conventional nonadiabaticsuperconductor logics.We have two objectives in this study. One is to reveal physical energy bounds oncomputation through investigation of the energy efficiency of AQFP logic. The otheris to develop fundamental circuits necessary for energy-efficient computing systemsusing AQFP logic.First, we numerically and experimentally demonstrated the sub-Ic 0 bit-energyoperations of AQFP gates to show that AQFP gates operate in adiabatic modes. Weinvestigated the dependence of energy dissipation and operation margins on circuitparameters. After optimizing the parameters, we calculated the bit energy and the biterror rate at 4.2 K to verify the sub-Ic 0 bit-energy operations at a finite temperature.Additionally, we measured the bit energy of an AQFP gate using a superconductorresonator-based method.Secondly, we numerically demonstrated the sub-kBT bit-energy operations, wherekB is the Boltzmann constant and T is temperature, to show that AQFP gates can operatebeyond thermodynamic energy bounds. We investigated the dependence of energydissipation on operation frequencies and damping conditions of Josephson junctions.By using underdamped junctions, we confirmed the sub-kBT bit-energy operationsat a finite temperature thorough circuit simulation. This result indicates that thereis no minimum energy dissipation required for the operations of AQFP gates unlessthe entropy of the system decreases, which corresponds to the Landauer’s argument on the minimum energy dissipation for computation. Also, we discussed quantummechanicalenergy bounds and experimentally demonstrated AQFP gates with underdampedjunctions.Additionally, we investigated reversible computing using AQFP logic with underdampedjunctions, in order to deal with an important but unresolved question: “Isreversible computing achievable by using practical devices?” We built a purely reversiblegate by using AQFP gates, which we designated as the reversible quantumflux-parametron (RQFP) gate. We calculated its energy dissipation and confirmed thatthere is no minimum energy dissipation for reversible logic operations using RQFPgates. To the best of our knowledge, these are the first calculation results that show nominimum energy dissipation in reversible computing that use practical circuit structures.Moreover, our experimental results have demonstrated the logical and physicalreversibility of the RQFP gate. We believe that this is the first demonstration thatshows both logical and physical reversibility using practical devices.Finally, we proposed a novel energy-efficient latch for AQFP logic, which we designatedas the quantum-flux-latch (QFL). Latches are necessary circuitries in largecomputing systems but had been missing in AQFP logic. We discussed its energyefficiency through simulation and experimentally demonstrated correct operations ofthe QFL and a 1-bit shift register using QFLs. Also, we proposed high-speed test circuitsusing QFLs and experimentally demonstrated logic operations of AQFP circuitsat high speed.We strongly believe that our results showed the extremely high energy efficiency ofAQFP logic. These results will move the AQFP logic to practical usage as extremelyenergy-efficient integrated circuits.

•Mar 26, 2014•1 citation

Optimization of Adiabatic Superconducting Logic Cells by Using π Josephson Junctions

G. S. Khismatullin, N. V. Klenov, Igor I. Soloviev

Adiabatic superconducting logic circuits can ensure the practical implementation of operations with the energy dissipation below the Landauer limit. However, applications of the existing solutions are limited because of two contradictory requirements of a high energy efficiency and a sufficiently fast response of devices. Josephson junctions with a negative critical current (π junctions) allow one to obtain a certain form of the potential energy of superconducting circuits and, as a result, a practically required degree of control of dynamic processes in the proposed reversible logic cells. The features of the current transport and balance of Josephson phases in circuits with π junctions make it possible to improve the coupling between the parts of a reversible computer by a factor more than 2. At the same time, the continuous evolution of the state is ensured at higher critical currents and higher characteristic voltages of the main Josephson junctions of adiabatic superconducting logic cells, which allows an increase in the response rate.

Journal of Experimental and Theoretical Physics Letters•Aug 1, 2023•3 citations

Progress With Physically and Logically Reversible Superconducting Digital Circuits

Jie Ren, Vasili K. Semenov

We continue to develop a new Superconductor Flux Logic (SFL) family based on nSQUID gates with fundamentally low energy dissipation and the ability to operate in irreversible and reversible modes. Prospective computers utilizing the new gates can keep conventional logically irreversible architectures. In this case the energy dissipation is limited by fundamental thermodynamic laws and could be as low as a fewkBTs per logic operation. Highly exotic and less practical logically and physically reversible circuit architectures are more attractive for us because they enable a reduction of the specific energy dissipation well below the thermodynamic thresholdkBTln2. The reversible option is of interest to us because we can then experimentally demonstrate that all technical mechanisms of the energy dissipation could be cut below the fundamental thermodynamic limit. In other words, we like to set the energy dissipation record for all conventional digital technologies that (if measured inkBT) is about one million times below the best figures achieved in commercially available semiconductor circuits. Besides, we believe that diving below the thermodynamic threshold would have impressive scientific and philosophical impacts. In the paper we introduce a new timing belt clocking scheme and present new circuits. While we still work with test circuits, some of them contain two 8-stage shift registers, one with direct and the other with inverted outputs. The energy dissipation per nSQUID gate per bit measured at 4 K temperature is already below the thermodynamic threshold. We are confident that we passed through the critical phase of the project and we simply need more time to make more sophisticated circuits. The extremely low energy dissipation converts our circuits into a natural candidate to support circuitry for any sensors operating at milli-Kelvin temperatures.

IEEE Transactions on Applied Superconductivity•Feb 16, 2011•116 citations

Exact Logic Synthesis for Reversible Quantum-Flux-Parametron Logic

Rongliang Fu, Olivia Chen, Nobuyuki Yoshikawa +1 more

Reversible computing, deriving its inspiration from Landauer's principle, has captured significant interest as a promising technology for logic operations without energy dissipation. The reversible quantum-flux-parametron (RQFP) stands as the first practical reversible logic gate using adiabatic superconducting devices, whose logical and physical reversibility has been experimentally demonstrated. However, due to its unique logic function and structure, the design of RQFP logic circuits is a highly challenging task. At present, there are no automated design tools available for RQFP logic. Therefore, this paper proposes the first exact logic synthesis algorithm for RQFP logic. It formulates the synthesis problem as the Boolean satisfiability problem and subsequently constructs and calls upon the incremental propositional logic model iteratively for optimal synthesis with the least number of gates and garbage outputs. Experimental results on the reversible logic benchmark from RevLib demonstrate the effectiveness of the proposed algorithm.

•Oct 28, 2023•6 citations

A reversible full adder using adiabatic superconductor logic

Taiki Yamae, Naoki Takeuchi, Nobuyuki Yoshikawa

Abstract Reversible logic circuits can perform logic operations in a thermodynamically reversible manner, or without energy dissipation. The reversible quantum-flux-parametron (RQFP) is a reversible logic gate using adiabatic superconductor logic. In the present study, we design and demonstrate a reversible full adder (RFA) using RQFP gates in order to demonstrate that RQFP gates can be used as building blocks to design reversible logic circuits. An analysis of the time evolution of the phase differences across the Josephson junctions in the RFA showed that its logic state can change quasi-statically during a logic operation. Calculation of the energy dissipation of the RFA showed that it decreases in proportion to the operating frequency. These numerical calculation results ensure that the RFA is thermodynamically and logically reversible. In addition, we experimentally demonstrated correct operation of the RFA for all input data combinations. These results reveal that logic circuits designed using RQFP gates can perform reversible computing, i.e. RQFP gates can be used as building blocks of reversible logic circuits.

Superconductor Science and Technology•Dec 17, 2018•18 citations
Reversible computing has been studied since Rolf Landauer advanced the argument that has come to be known as Landauer's principle. This principle states that there is no minimum energy dissipation for logic operations in reversible computing, because it is not accompanied by reductions in information entropy. However, until now, no practical reversible logic gates have been demonstrated. One of the problems is that reversible logic gates must be built by using extremely energy-efficient logic devices. Another difficulty is that reversible logic gates must be both logically and physically reversible. Here we propose the first practical reversible logic gate using adiabatic superconducting devices and experimentally demonstrate the logical and physical reversibility of the gate. Additionally, we estimate the energy dissipation of the gate, and discuss the minimum energy dissipation required for reversible logic operations. It is expected that the results of this study will enable reversible computing to move from the theoretical stage into practical usage.
Reversible computing is considered to be a key technology to achieve an extremely high energy efficiency in future computers. In this study, we investigated the relationship between reversibility and energy dissipation in adiabatic superconductor logic. We analyzed the evolution of phase differences of Josephson junctions in the reversible quantum-flux-parametron (RQFP) gate and confirmed that the phase differences can change time reversibly, which indicates that the RQFP gate is physically, as well as logically, reversible. We calculated energy dissipation required for the RQFP gate to perform a logic operation and numerically demonstrated that the energy dissipation can fall below the thermal limit, or the Landauer bound, by lowering operation frequencies. We also investigated the 1-bit-erasure gate as a logically irreversible gate and the quasi-RQFP gate as a physically irreversible gate. We calculated the energy dissipation of these irreversible gates and showed that the energy dissipation of these gate is dominated by non-adiabatic state changes, which are induced by unwanted interactions between gates due to logical or physical irreversibility. Our results show that, in reversible computing using adiabatic superconductor logic, logical and physical reversibility are required to achieve energy dissipation smaller than the Landauer bound without non-adiabatic processes caused by gate interactions.
Complementary metal-oxide-semiconductor (CMOS) circuit technology has sustainedthe exponential growth of computing power for more than 20 years. However, it hasbeen estimated that the power consumption of a next-generation supercomputer willexceed the power supplied from a single power plant. This indicates the need to dramaticallyimprove the energy efficiency of logic devices to achieve future high-endcomputers.As an extremely energy-efficient logic, we proposed and have been investigatingadiabatic quantum-flux-parametron (AQFP) devices. Due to adiabatic switching operations,its bit energy (energy dissipation per bit) can go below Ic 0, where Ic is acritical current of a Josephson junction and 0 is a single-flux-quantum (SFQ). Ic 0corresponds to the energy dissipated at every 2 phase transition in conventional nonadiabaticsuperconductor logics.We have two objectives in this study. One is to reveal physical energy bounds oncomputation through investigation of the energy efficiency of AQFP logic. The otheris to develop fundamental circuits necessary for energy-efficient computing systemsusing AQFP logic.First, we numerically and experimentally demonstrated the sub-Ic 0 bit-energyoperations of AQFP gates to show that AQFP gates operate in adiabatic modes. Weinvestigated the dependence of energy dissipation and operation margins on circuitparameters. After optimizing the parameters, we calculated the bit energy and the biterror rate at 4.2 K to verify the sub-Ic 0 bit-energy operations at a finite temperature.Additionally, we measured the bit energy of an AQFP gate using a superconductorresonator-based method.Secondly, we numerically demonstrated the sub-kBT bit-energy operations, wherekB is the Boltzmann constant and T is temperature, to show that AQFP gates can operatebeyond thermodynamic energy bounds. We investigated the dependence of energydissipation on operation frequencies and damping conditions of Josephson junctions.By using underdamped junctions, we confirmed the sub-kBT bit-energy operationsat a finite temperature thorough circuit simulation. This result indicates that thereis no minimum energy dissipation required for the operations of AQFP gates unlessthe entropy of the system decreases, which corresponds to the Landauer’s argument on the minimum energy dissipation for computation. Also, we discussed quantummechanicalenergy bounds and experimentally demonstrated AQFP gates with underdampedjunctions.Additionally, we investigated reversible computing using AQFP logic with underdampedjunctions, in order to deal with an important but unresolved question: “Isreversible computing achievable by using practical devices?” We built a purely reversiblegate by using AQFP gates, which we designated as the reversible quantumflux-parametron (RQFP) gate. We calculated its energy dissipation and confirmed thatthere is no minimum energy dissipation for reversible logic operations using RQFPgates. To the best of our knowledge, these are the first calculation results that show nominimum energy dissipation in reversible computing that use practical circuit structures.Moreover, our experimental results have demonstrated the logical and physicalreversibility of the RQFP gate. We believe that this is the first demonstration thatshows both logical and physical reversibility using practical devices.Finally, we proposed a novel energy-efficient latch for AQFP logic, which we designatedas the quantum-flux-latch (QFL). Latches are necessary circuitries in largecomputing systems but had been missing in AQFP logic. We discussed its energyefficiency through simulation and experimentally demonstrated correct operations ofthe QFL and a 1-bit shift register using QFLs. Also, we proposed high-speed test circuitsusing QFLs and experimentally demonstrated logic operations of AQFP circuitsat high speed.We strongly believe that our results showed the extremely high energy efficiency ofAQFP logic. These results will move the AQFP logic to practical usage as extremelyenergy-efficient integrated circuits.
Adiabatic superconducting logic circuits can ensure the practical implementation of operations with the energy dissipation below the Landauer limit. However, applications of the existing solutions are limited because of two contradictory requirements of a high energy efficiency and a sufficiently fast response of devices. Josephson junctions with a negative critical current (π junctions) allow one to obtain a certain form of the potential energy of superconducting circuits and, as a result, a practically required degree of control of dynamic processes in the proposed reversible logic cells. The features of the current transport and balance of Josephson phases in circuits with π junctions make it possible to improve the coupling between the parts of a reversible computer by a factor more than 2. At the same time, the continuous evolution of the state is ensured at higher critical currents and higher characteristic voltages of the main Josephson junctions of adiabatic superconducting logic cells, which allows an increase in the response rate.
We continue to develop a new Superconductor Flux Logic (SFL) family based on nSQUID gates with fundamentally low energy dissipation and the ability to operate in irreversible and reversible modes. Prospective computers utilizing the new gates can keep conventional logically irreversible architectures. In this case the energy dissipation is limited by fundamental thermodynamic laws and could be as low as a fewkBTs per logic operation. Highly exotic and less practical logically and physically reversible circuit architectures are more attractive for us because they enable a reduction of the specific energy dissipation well below the thermodynamic thresholdkBTln2. The reversible option is of interest to us because we can then experimentally demonstrate that all technical mechanisms of the energy dissipation could be cut below the fundamental thermodynamic limit. In other words, we like to set the energy dissipation record for all conventional digital technologies that (if measured inkBT) is about one million times below the best figures achieved in commercially available semiconductor circuits. Besides, we believe that diving below the thermodynamic threshold would have impressive scientific and philosophical impacts. In the paper we introduce a new timing belt clocking scheme and present new circuits. While we still work with test circuits, some of them contain two 8-stage shift registers, one with direct and the other with inverted outputs. The energy dissipation per nSQUID gate per bit measured at 4 K temperature is already below the thermodynamic threshold. We are confident that we passed through the critical phase of the project and we simply need more time to make more sophisticated circuits. The extremely low energy dissipation converts our circuits into a natural candidate to support circuitry for any sensors operating at milli-Kelvin temperatures.
Reversible computing, deriving its inspiration from Landauer's principle, has captured significant interest as a promising technology for logic operations without energy dissipation. The reversible quantum-flux-parametron (RQFP) stands as the first practical reversible logic gate using adiabatic superconducting devices, whose logical and physical reversibility has been experimentally demonstrated. However, due to its unique logic function and structure, the design of RQFP logic circuits is a highly challenging task. At present, there are no automated design tools available for RQFP logic. Therefore, this paper proposes the first exact logic synthesis algorithm for RQFP logic. It formulates the synthesis problem as the Boolean satisfiability problem and subsequently constructs and calls upon the incremental propositional logic model iteratively for optimal synthesis with the least number of gates and garbage outputs. Experimental results on the reversible logic benchmark from RevLib demonstrate the effectiveness of the proposed algorithm.
Abstract Reversible logic circuits can perform logic operations in a thermodynamically reversible manner, or without energy dissipation. The reversible quantum-flux-parametron (RQFP) is a reversible logic gate using adiabatic superconductor logic. In the present study, we design and demonstrate a reversible full adder (RFA) using RQFP gates in order to demonstrate that RQFP gates can be used as building blocks to design reversible logic circuits. An analysis of the time evolution of the phase differences across the Josephson junctions in the RFA showed that its logic state can change quasi-statically during a logic operation. Calculation of the energy dissipation of the RFA showed that it decreases in proportion to the operating frequency. These numerical calculation results ensure that the RFA is thermodynamically and logically reversible. In addition, we experimentally demonstrated correct operation of the RFA for all input data combinations. These results reveal that logic circuits designed using RQFP gates can perform reversible computing, i.e. RQFP gates can be used as building blocks of reversible logic circuits.