Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Magic Cells and Circuits: New Convergence of Memory and Logic Functions in Superconductor Devices

Vasili K. Semenov

Published Dec 31, 2012• 7 citations
Publisher

Abstract

The finite speed of light sets a fundamental limitation for the time required to communicate between any remote memory and logic devices. This limitation alone implies that the latency of communication cycles between, say, 1-cm processor and memory chips is longer than 120 ps. To bypass this limitation, we propose a novel way of using SFQ cells and devices that eliminates the communication delays by storing and processing information in the same location. We introduce new objects (cells and devices) that store one of input operands, process it during a logic operation that might involve other operands, and replace the initially stored operand by the result of the logic operation. Because these objects execute both Memory And loGIC functions we nicknamed them MAGIC cells and devices. Physically each MAGIC object is either a single flip-flop or composed of flip-flops. MAGIC objects are compatible with, or even may constitute a part of, RSFQ technology. We discuss functional devices built of MAGIC cells. These devices are potentially faster, smaller in size, and have modest requirements for external memory. This is because the suggested functional circuits partly self-satisfy storage needs by utilizing their inherent ability for storing data.

DOI
10.1109/tasc.2012.2237214

Related papers

Erasing logic-memory boundaries in superconductor electronics

Vasili K. Semenov

Superconductor electronics holds records for clock frequency and energy efficiency at the chip level, and is also projected to large systems that can absorb the cooling overhead. These advantages have nevertheless only managed to give this technology a back seat to CMOS digital circuits, which offer orders of magnitude more complexity. Furthermore, pursuing the CMOS paradigm with superconductor circuits would bring their clock frequency down to that of CMOS circuits. This makes superconductor technology much more open to risky innovations and even for paradigm changes. In the paper we point out that both (speed and energy efficiency) advantages of superconductor electronics could be preserved due to a unique composition of memory and logic functions of RSFQ cells. We propose to reorganize the original RSFQ cells into a new family of Memory And loGIC (MAGIC) gate/register objects that run arithmetic calculations as well as store results. The new MAGIC objects eliminate the time and energy overheads associated with the conventional transfer of computed data to memory by essentially reducing the transfer distance to zero. The new objects could serve as building blocks for distributed MAGIC-compatible architectures, differing from CMOS-like register files by processing as well as storing data. A simple Logic Unit (LU) would be sufficient to control the MAGIC registers, because the registers would provide most of the arithmetic functions and separate ALUs would not be needed. The reduction of the data exchange between logic and memory units leads to additional energy saving. Factorization of large integers is presented as an example illustrating the speed and density advantages of the new approach. The end result will be a superior technology which offers a combination of performance and energy efficiency unattainable by existing technologies or their possible extensions.

IEEE International Conference on Rebooting Computing (ICRC)•Oct 1, 2016•2 citations

A nanocryotron memory and logic family

Alessandro Buzzi, Matteo Castellani, Reed A. Foster +3 more

The development of superconducting electronics based on nanocryotrons has been limited so far to few device circuits, in part due to the lack of standard and robust logic cells. Here, we introduce and experimentally demonstrate designs for a set of nanocryotron-based building blocks that can be configured and combined to implement memory and logic functions. The devices were fabricated by patterning a single superconducting layer of niobium nitride and measured in liquid helium on a wide range of operating points. The tests show 10 − 4 bit error rates with above ± 20 % margins up to 50 MHz and the possibility of operating under the effect of an out-of-plane 36 mT magnetic field, with ± 30 % margins at 10 MHz. Additionally, we designed and measured an equivalent delay-flip-flop made of two memory cells to show the possibility of combining multiple building blocks to make larger circuits. These blocks may constitute a solid foundation for the development of nanocryotron logic circuits and finite-state machines with potential applications in the integrated processing and control of superconducting nanowire single-photon detectors.

arXiv:2212.07953•Applied Physics Letters•Apr 3, 2023•26 citations

RSFQ: The fastest digital technology

K. K. Likharev

This paper deals with the recent progress in the development of Rapid Single-Flux-Quantum (RSFQ) digital technology based on macroscopic quantum effects in superconductors. Elementary cells of this logic family store and process digital bits in the form of single quanta of magnetic flux, while the data exchange between the cells is provided with picosecond pulses transferred along superconductor microstrip lines with a speed approaching the speed of light. RSFQ devices combine a unique set of

Journal de Physique IV (Proceedings)•May 1, 2002•4 citations

Memories with Josephson Junctions

Peter Wolf

The talk is based on an overview which was published recently (1). For this reason, only an abstract is given here, which includes Later results not contained in the aforementioned overview. The presently-known Josephson memory cells store information as persistent currents in superconducting loops, or what is equivalent as a magnetic flux in the area of the ring. This method of storage is nonvolatile and has no power consumption in the storing state. In a superconducting ring system, the magnetic flux is quantized, and cells have been built which operate either with only one flux quantum, or with many of them. For the Latter cells with many flux quanta (ring cells), quite a number of designs exist. They have one or two Josephson junctions in the ring, which allow writing. An external junction which is controlled by the ring current serves for non-destructive reading of the information. The smallest cell realized had an area of 900 ?m2 with a 2 ?m minimum line width. Switching speed was ? 80 ps. Cells which store information as a single-flux quantum (single flux-quantum cells = SFQ cells) in the ring, usually contain two Josephson junctions used for reading and writing. Read-out in most of these cells is destructive, but methods of reading non-destructively have also been proposed. The smallest device made had an area of ? 150 ?m2 with a minimum line width of 2 ?m. The read signal had a rise time ? 100 ps.

European Solid-State Circuits Conference (ESSCIRC)•Sep 1, 1978•0 citations

Design and implementation of a RSFQ superconductive digital electronics cell library

Rodwell S. Bakolo

ENGLISH ABSTRACT: Rapid Single Flux Quantum (RSFQ) cells are key in the design of complex and applicable RSFQ electronic circuits. These cells are low-level circuit elements that are used repeatedly to build larger, applicable RSFQ circuitry. Making these cells simple to layout and manufacture, but reliable for extensive use demands a careful development process for RSFQ cells. Cell functionality is verified through simulations, thereafter the cell is laid out in special software packages. Inductance of on-chip superconductor structures is extracted through careful modelling with numerical field solver software. A cell library has been developed by incorporating existing or published cells after further analysis and optimization, as well as developing new cells. Cells that have been adapted into the library include the Josephson transmission line (JTL), Splitter, Merger, D-Flip Flop (DFF), T-Flip Flop (TFF), NOT, AND, OR and XOR, DC-SFQ and SFQ-DC and PTL Driver and Receivers. New cells include NOR, NAND and XNOR. The cells were designed for the IPHT’s RSFQ1D 1kA/cmª and Hypres’ 4.5kA/cmª processes. The cells in the library have good bias current operating margins obtained through simulations (> ±26%). All cells have all the parameters listed in the thesis including extracted inductance values. In order to have a complete and verified RSFQ cell library, cells have been sent for fabrication at IPHT and Hypres facilities. These cells can now be tested on-chip, in the laboratory, to establish functionality and practical bias current margins. All test signal patterns and bias currents required for testing are defined to allow co-workers or collaborators to test the cells.

•Dec 1, 2011•1 citation

Single flux, quantum B flip-flop and its possible applications

Stanislav V. Polonsky, Vasili K. Semenov, Alex F. Kirichenko

We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1994•76 citations
The finite speed of light sets a fundamental limitation for the time required to communicate between any remote memory and logic devices. This limitation alone implies that the latency of communication cycles between, say, 1-cm processor and memory chips is longer than 120 ps. To bypass this limitation, we propose a novel way of using SFQ cells and devices that eliminates the communication delays by storing and processing information in the same location. We introduce new objects (cells and devices) that store one of input operands, process it during a logic operation that might involve other operands, and replace the initially stored operand by the result of the logic operation. Because these objects execute both Memory And loGIC functions we nicknamed them MAGIC cells and devices. Physically each MAGIC object is either a single flip-flop or composed of flip-flops. MAGIC objects are compatible with, or even may constitute a part of, RSFQ technology. We discuss functional devices built of MAGIC cells. These devices are potentially faster, smaller in size, and have modest requirements for external memory. This is because the suggested functional circuits partly self-satisfy storage needs by utilizing their inherent ability for storing data.
Superconductor electronics holds records for clock frequency and energy efficiency at the chip level, and is also projected to large systems that can absorb the cooling overhead. These advantages have nevertheless only managed to give this technology a back seat to CMOS digital circuits, which offer orders of magnitude more complexity. Furthermore, pursuing the CMOS paradigm with superconductor circuits would bring their clock frequency down to that of CMOS circuits. This makes superconductor technology much more open to risky innovations and even for paradigm changes. In the paper we point out that both (speed and energy efficiency) advantages of superconductor electronics could be preserved due to a unique composition of memory and logic functions of RSFQ cells. We propose to reorganize the original RSFQ cells into a new family of Memory And loGIC (MAGIC) gate/register objects that run arithmetic calculations as well as store results. The new MAGIC objects eliminate the time and energy overheads associated with the conventional transfer of computed data to memory by essentially reducing the transfer distance to zero. The new objects could serve as building blocks for distributed MAGIC-compatible architectures, differing from CMOS-like register files by processing as well as storing data. A simple Logic Unit (LU) would be sufficient to control the MAGIC registers, because the registers would provide most of the arithmetic functions and separate ALUs would not be needed. The reduction of the data exchange between logic and memory units leads to additional energy saving. Factorization of large integers is presented as an example illustrating the speed and density advantages of the new approach. The end result will be a superior technology which offers a combination of performance and energy efficiency unattainable by existing technologies or their possible extensions.
The development of superconducting electronics based on nanocryotrons has been limited so far to few device circuits, in part due to the lack of standard and robust logic cells. Here, we introduce and experimentally demonstrate designs for a set of nanocryotron-based building blocks that can be configured and combined to implement memory and logic functions. The devices were fabricated by patterning a single superconducting layer of niobium nitride and measured in liquid helium on a wide range of operating points. The tests show 10 − 4 bit error rates with above ± 20 % margins up to 50 MHz and the possibility of operating under the effect of an out-of-plane 36 mT magnetic field, with ± 30 % margins at 10 MHz. Additionally, we designed and measured an equivalent delay-flip-flop made of two memory cells to show the possibility of combining multiple building blocks to make larger circuits. These blocks may constitute a solid foundation for the development of nanocryotron logic circuits and finite-state machines with potential applications in the integrated processing and control of superconducting nanowire single-photon detectors.
The talk is based on an overview which was published recently (1). For this reason, only an abstract is given here, which includes Later results not contained in the aforementioned overview. The presently-known Josephson memory cells store information as persistent currents in superconducting loops, or what is equivalent as a magnetic flux in the area of the ring. This method of storage is nonvolatile and has no power consumption in the storing state. In a superconducting ring system, the magnetic flux is quantized, and cells have been built which operate either with only one flux quantum, or with many of them. For the Latter cells with many flux quanta (ring cells), quite a number of designs exist. They have one or two Josephson junctions in the ring, which allow writing. An external junction which is controlled by the ring current serves for non-destructive reading of the information. The smallest cell realized had an area of 900 ?m2 with a 2 ?m minimum line width. Switching speed was ? 80 ps. Cells which store information as a single-flux quantum (single flux-quantum cells = SFQ cells) in the ring, usually contain two Josephson junctions used for reading and writing. Read-out in most of these cells is destructive, but methods of reading non-destructively have also been proposed. The smallest device made had an area of ? 150 ?m2 with a minimum line width of 2 ?m. The read signal had a rise time ? 100 ps.
ENGLISH ABSTRACT: Rapid Single Flux Quantum (RSFQ) cells are key in the design of complex and applicable RSFQ electronic circuits. These cells are low-level circuit elements that are used repeatedly to build larger, applicable RSFQ circuitry. Making these cells simple to layout and manufacture, but reliable for extensive use demands a careful development process for RSFQ cells. Cell functionality is verified through simulations, thereafter the cell is laid out in special software packages. Inductance of on-chip superconductor structures is extracted through careful modelling with numerical field solver software. A cell library has been developed by incorporating existing or published cells after further analysis and optimization, as well as developing new cells. Cells that have been adapted into the library include the Josephson transmission line (JTL), Splitter, Merger, D-Flip Flop (DFF), T-Flip Flop (TFF), NOT, AND, OR and XOR, DC-SFQ and SFQ-DC and PTL Driver and Receivers. New cells include NOR, NAND and XNOR. The cells were designed for the IPHT’s RSFQ1D 1kA/cmª and Hypres’ 4.5kA/cmª processes. The cells in the library have good bias current operating margins obtained through simulations (> ±26%). All cells have all the parameters listed in the thesis including extracted inductance values. In order to have a complete and verified RSFQ cell library, cells have been sent for fabrication at IPHT and Hypres facilities. These cells can now be tested on-chip, in the laboratory, to establish functionality and practical bias current margins. All test signal patterns and bias currents required for testing are defined to allow co-workers or collaborators to test the cells.
We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>