Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Symposium on Topology in Ordered Phases

QUANTUM DEVICE APPLICATIONS OF MESOSCOPIC SUPERCONDUCTIVITY

Pertti Juhani Hakonen

Published Aug 1, 2006• 3 citations
Publisher

Abstract

A brief account is given on the possibilities of mesoscopic superconductivity in low-noise amplifier and detector applications. In particular, three devices will be described: 1) Bloch oscillating transistor (BOT), 2) Inductively-read superconducting Cooper pair transistor (L-SET), and 3) Quantum capacitive phase detector (C-SET). The BOT is a low-noise current amplifier while the L-SET and C-SET act as ultra-sensitive charge and phase detectors, respectively. The basic operating principles and the main characteristics of these devices will be reviewed and discussed.

DOI
10.1142/9789812772879_0055

Related papers

Quantum device applications of mesoscopic superconductivity

Mika E. T. Sillanpää

The work involves a study of physical phenomena that take place at very small length scales, below one micro-meter. At temperatures roughly below one degree Kelvin, quantum-mechanical effects may rule in electronic transport. Macroscopic quantum-coherent effects that occur in metallic superconducting microstructures, are particularly intriguing. Large-scale quantum information processing is widely believed to be attainable utilizing such physical systems. This work concentrates on answering the question of how the described quantum-mechanical systems may be used as sensitive measuring devices. Considerable attention is paid to energy-storing metallic microstructures whose electrical properties resemble those of the familiar inductor or capacitor. This research involves primarily experimental investigations conducted around temperatures of 0.1 Kelvin. Methods both at low and at radio frequencies have been used. The experimental findings have been modelled theoretically, and theoretical concepts for new physical phenomena have been introduced. An inductively measured radio-frequency Cooper-pair transistor, the L-SET, has been developed and experimentally verified in this work. Being highly sensitive, fast, and non-invasive, the L-SET appears to be the most promising method for measuring electric charge. Sensitivity in charge measurements of 20 millionths of the electron charge (micro-e) within one second, and an input bandwidth of 100 MHz, have been demonstrated. It has been shown theoretically that the ultimate measurement accuracy is about 0.1 micro-e within a second. A new phase detector based on the Cooper-pair transistor has been proposed. This system has also been shown to be potentially usable as a quantum bit. A new type of radio-frequency single-electron transistor built using a multi-walled carbon nanotube has been fabricated and operated. Technologies have been developed in order to make the physical nano- or microstructures. A method has been presented to fabricate non-superconducting tunnel junctions. Consequences of the inverse superconducting proximity effect on the studied superconducting structures were considered. Measurement procedures were investigated for a new low-noise nanoamplifier, the Bloch-oscillating transistor. Single superconducting tunnel junctions were tested as detectors of energy states of the environment, or of noise.

•Apr 1, 2005•3 citations

Josephson junctions in charge and phase picture Theory and applications

Juha Hassel

Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.

•Nov 9, 2004•0 citations

Microwave Experiments and Noise in Mesoscopic Devices

Jayanta Sarkar

This thesis is a compilation of several works in the area of condensed matter physics, and with devices based on superconducting Josephson junctions (JJ) as the common denominator for the presented projects apart from the work on diffusive systems. Microwave measurements were conducted on a Superconducting Cooper pair transistor to explore its current-phase relationship. Measurements on a JJ-based qubit coupled to a LC resonator revealed the vibronic transitions obeying the Franck-Condon principle. The main body of the thesis is the work done on the Bloch Oscillating Transistor (BOT), an ultra low noise quantum amplifier. In the present work, we investigated the dynamics of the BOT near the bifurcation threshold as well as implemented differential BOTs to check its capability to reject common mode signals. To account for our studies of quantum features in mesoscopic systems other than JJs, we performed an experiment similar to the Hanbury-Brown and Twiss interferometry in optics. For this mesoscopic interference experiment we selected a multiterminal diffusive system. We developed a low temperature noise measurement scheme to study current-current correlations in the GHz frequency range. In our experiments we found a small positive HBT exchange correction factor in the non-interacting limit at low bias voltage in the presence of quantum interference. We found negative exchange correction factor in the hot electron case for similar structures, which agrees well with the theory. Altogether, our experiments demonstrated the theoretically predicted HBT exchange effects in non-interacting and interacting regime of electron transport in a diffusive mesoscopic system.

•Jan 1, 2015•1 citation

Low-Noise Current Amplifier Based on Mesoscopic Josephson Junction

Julien Delahaye, Juha Hassel, Rene K. Lindell +4 more

We used the band structure of a mesoscopic Josephson junction to construct low-noise amplifiers. By taking advantage of the quantum dynamics of a Josephson junction, i.e., the interplay of interlevel transitions and the Coulomb blockade of Cooper pairs, we created transistor-like devices, Bloch oscillating transistors, with considerable current gain and high-input impedance. In these transistors, the correlated supercurrent of Cooper pairs is controlled by a small base current made up of single electrons. Our devices reached current and power gains on the order of 30 and 5, respectively. The noise temperature was estimated to be around 1 kelvin, but noise temperatures of less than 0.1 kelvin can be realistically achieved. These devices provide quantum-electronic building blocks that will be useful at low temperatures in low-noise circuit applications with an intermediate impedance level.

Science•Feb 13, 2003•62 citations

Quantum capacitive phase detector

Leif Roschier, Mika A. Sillanpää, Pertti Juhani Hakonen

We discuss how a single Cooper-pair transistor may be used to detect the superconducting phase difference by using the phase dependence of the input capacitance from gate to ground. The proposed device has a low power dissipation because its operation is in principle free from quasiparticle generation. According to the sensitivity estimates, the device may be used for efficient qubit readout in a galvanically isolated and symmetrized circuit.

arXiv:cond-mat/0408145•Physical Review B•Jan 31, 2005•15 citations

Josephson-Junction Qubits

Yuriy Makhlin, Gerd Schön, Alexander Shnirman

Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.

Fortschritte der Physik•Sep 1, 2000•11 citations
A brief account is given on the possibilities of mesoscopic superconductivity in low-noise amplifier and detector applications. In particular, three devices will be described: 1) Bloch oscillating transistor (BOT), 2) Inductively-read superconducting Cooper pair transistor (L-SET), and 3) Quantum capacitive phase detector (C-SET). The BOT is a low-noise current amplifier while the L-SET and C-SET act as ultra-sensitive charge and phase detectors, respectively. The basic operating principles and the main characteristics of these devices will be reviewed and discussed.
The work involves a study of physical phenomena that take place at very small length scales, below one micro-meter. At temperatures roughly below one degree Kelvin, quantum-mechanical effects may rule in electronic transport. Macroscopic quantum-coherent effects that occur in metallic superconducting microstructures, are particularly intriguing. Large-scale quantum information processing is widely believed to be attainable utilizing such physical systems. This work concentrates on answering the question of how the described quantum-mechanical systems may be used as sensitive measuring devices. Considerable attention is paid to energy-storing metallic microstructures whose electrical properties resemble those of the familiar inductor or capacitor. This research involves primarily experimental investigations conducted around temperatures of 0.1 Kelvin. Methods both at low and at radio frequencies have been used. The experimental findings have been modelled theoretically, and theoretical concepts for new physical phenomena have been introduced. An inductively measured radio-frequency Cooper-pair transistor, the L-SET, has been developed and experimentally verified in this work. Being highly sensitive, fast, and non-invasive, the L-SET appears to be the most promising method for measuring electric charge. Sensitivity in charge measurements of 20 millionths of the electron charge (micro-e) within one second, and an input bandwidth of 100 MHz, have been demonstrated. It has been shown theoretically that the ultimate measurement accuracy is about 0.1 micro-e within a second. A new phase detector based on the Cooper-pair transistor has been proposed. This system has also been shown to be potentially usable as a quantum bit. A new type of radio-frequency single-electron transistor built using a multi-walled carbon nanotube has been fabricated and operated. Technologies have been developed in order to make the physical nano- or microstructures. A method has been presented to fabricate non-superconducting tunnel junctions. Consequences of the inverse superconducting proximity effect on the studied superconducting structures were considered. Measurement procedures were investigated for a new low-noise nanoamplifier, the Bloch-oscillating transistor. Single superconducting tunnel junctions were tested as detectors of energy states of the environment, or of noise.
Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.
This thesis is a compilation of several works in the area of condensed matter physics, and with devices based on superconducting Josephson junctions (JJ) as the common denominator for the presented projects apart from the work on diffusive systems. Microwave measurements were conducted on a Superconducting Cooper pair transistor to explore its current-phase relationship. Measurements on a JJ-based qubit coupled to a LC resonator revealed the vibronic transitions obeying the Franck-Condon principle. The main body of the thesis is the work done on the Bloch Oscillating Transistor (BOT), an ultra low noise quantum amplifier. In the present work, we investigated the dynamics of the BOT near the bifurcation threshold as well as implemented differential BOTs to check its capability to reject common mode signals. To account for our studies of quantum features in mesoscopic systems other than JJs, we performed an experiment similar to the Hanbury-Brown and Twiss interferometry in optics. For this mesoscopic interference experiment we selected a multiterminal diffusive system. We developed a low temperature noise measurement scheme to study current-current correlations in the GHz frequency range. In our experiments we found a small positive HBT exchange correction factor in the non-interacting limit at low bias voltage in the presence of quantum interference. We found negative exchange correction factor in the hot electron case for similar structures, which agrees well with the theory. Altogether, our experiments demonstrated the theoretically predicted HBT exchange effects in non-interacting and interacting regime of electron transport in a diffusive mesoscopic system.
We used the band structure of a mesoscopic Josephson junction to construct low-noise amplifiers. By taking advantage of the quantum dynamics of a Josephson junction, i.e., the interplay of interlevel transitions and the Coulomb blockade of Cooper pairs, we created transistor-like devices, Bloch oscillating transistors, with considerable current gain and high-input impedance. In these transistors, the correlated supercurrent of Cooper pairs is controlled by a small base current made up of single electrons. Our devices reached current and power gains on the order of 30 and 5, respectively. The noise temperature was estimated to be around 1 kelvin, but noise temperatures of less than 0.1 kelvin can be realistically achieved. These devices provide quantum-electronic building blocks that will be useful at low temperatures in low-noise circuit applications with an intermediate impedance level.
Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.