Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Integrated polarization rotator/converter by stimulated Raman adiabatic passage

Xiao Xiong, Chang‐Ling Zou, Xi‐Feng Ren, Guang‐Can Guo

Published Jul 10, 2013• 20 citations
Publisher

Abstract

We proposed a polarization rotator inspired by stimulated Raman adiabatic passage model from quantum optics, which is composed of a signal waveguide and an ancillary waveguide. The two orthogonal modes in signal waveguide and the oblique mode in ancillary waveguide form a Λ-type three-level system. By controlling the width of signal waveguide and the gap between two waveguides, adiabatic conversion between two orthogonal modes can be realized in the signal waveguide. With such adiabatic passage, polarization conversion is completed within 150 μm length, with the efficiencies over 99% for both conversions between horizontal polarization and vertical polarization. In addition, such a polarization rotator is quite robust against fabrication error, allowing a wide range of tolerances for the rotator geometric parameters. Our work is not only significative to photonic simulations of coherent quantum phenomena with engineered photonic waveguides, but also enlightens the practical applications of these phenomena in optical device designs.

DOI
10.1364/oe.21.017097

Related papers

Polarization splitter based on a three waveguide directional coupler using quantum mechanical analogies

Pragati Aashna, Krishnan Thyagarajan

Abstract We propose a novel waveguide polarization splitter based on the optical analogue of two-photon Rabi oscillations and stimulated Raman adiabatic passage in a three waveguide directional coupler. Both these processes are borrowed from three level quantum mechanical atomic systems, in which an intermediate level is used to transfer the population from one state to another without any population occupation in the intermediate level. To show the practical feasibility of the device, simulations have been carried out on waveguides in lithium niobate and we show that two orthogonal polarizations can be separated at the output using the proposed three waveguide structures. We also show that the proposed structure is robust against changes in phase mismatch parameters, as well as wavelength of operation.

Journal of Optics•Apr 21, 2017•10 citations

Complete and robust light transfer in three-waveguide coupler by shortcut to adiabaticity

Wei Huang, Yun Chen, Xiaowei Qu +6 more

A novel design for complete transfer and robust three-waveguide coupler is presented in this paper, which employs shortcut to adiabaticity (STA) based on stimulated Raman adiabatic passage (STIRAP). Most recently, some remarkable papers on STA of STIRAP [Phys. Rev. A 94(6), 063411 (2016) and Nat. Comm. 7, 12479 (2016)] have been proposed in both theoretical and experimental configurations. In this paper, we propose to design a novel three-waveguide coupler by employing STA based on STIRAP, which can achieve much shorter device length and also maintain the robust performance against perturbations on device geometry parameters compared to previous devices. This finding significantly improves the performance and fabrication of integrated optical devices to build up more compactable devices.

AIP Advances•Sep 1, 2020•3 citations

Arbitrary Ratio Three Waveguide Beam Splitter using Shortcuts to Adiabaticity

Yu-Chen Chuang, Shuo‐Yen Tseng

One of the most fundamental devices for integrated optics is the beam splitter, which is often realized with a directional coupler. However, it is well known that the robustness of such devices against wavelength and/or fabrication parameter variations is limited. Three waveguide couplers based on the quantum-optical analogy of the stimulated Raman Adiabatic Passage (STIRAP) protocol have emerged as a promising solution to the aforementioned issues of device robustness [1, 2]. The tradeoff is that the adiabatic devices are generally longer than their non-adiabatic counterparts. Recently, devices using shortcuts to adiabaticity [3] have been shown to provide alternative robust beam coupling as the adiabatic devices, but at a shorter device length [4]. In this paper, we use the invariant-based inverse engineering [5] to realize a short and robust arbitrary splitting ratio three waveguide beam splitter.

JSAP-OSA Joint Symposia•Jan 1, 2014•0 citations

Adiabatic passage of light in coupled optical waveguides

Stefano Longhi

Adiabatic passage of light in coupled optical waveguides with a curved axis is theoretically investigated and shown to bear a close connection with coherent population transfer among quantum states of atoms and molecules. In particular, the optical analog of stimulated Raman adiabatic passage can be realized in a three-waveguide optical directional coupler.

Physical Review E•Feb 13, 2006•102 citations

Adiabaticity analysis of mode conversion using quantum-optical analogy in multimode waveguides

Tzung‐Yi Lin, Fu-Chen Hsiao, Shuo‐Yen Tseng

The adibaticity of mode converters based on optical analogy of simulated Raman adiabatic passage (STIRAP) is investigated using the supermode analysis. The evolution equations for the supermodes are obtained. The shortest device length is determined.

Opto-Electronics and Communications Conference (OECC)•Jul 1, 2012•0 citations

Experimental demonstration of bidirectional light transfer in adiabatic waveguide structures

Tong Liu, Alexander S. Solntsev, Andreas Boes +5 more

We propose and demonstrate a novel type of optical integrated structure consisting of three adiabatically coupled waveguides arranged in an N-shaped geometry. Unlike conventional adiabatic three-waveguide couplers mimicking the stimulated Raman adiabatic passage process which utilize solely the counter-intuitive coupling and, thus, operate only in one direction, our structure achieves complete bidirectional light transfer between two waveguides through the counter-intuitive and intuitive coupling in either direction over a wide wavelength range. Moreover, the light transfer through the intuitive coupling is more efficient and robust than through the counter-intuitive coupling.

Optics Letters•Nov 9, 2016•15 citations
We proposed a polarization rotator inspired by stimulated Raman adiabatic passage model from quantum optics, which is composed of a signal waveguide and an ancillary waveguide. The two orthogonal modes in signal waveguide and the oblique mode in ancillary waveguide form a Λ-type three-level system. By controlling the width of signal waveguide and the gap between two waveguides, adiabatic conversion between two orthogonal modes can be realized in the signal waveguide. With such adiabatic passage, polarization conversion is completed within 150 μm length, with the efficiencies over 99% for both conversions between horizontal polarization and vertical polarization. In addition, such a polarization rotator is quite robust against fabrication error, allowing a wide range of tolerances for the rotator geometric parameters. Our work is not only significative to photonic simulations of coherent quantum phenomena with engineered photonic waveguides, but also enlightens the practical applications of these phenomena in optical device designs.
Abstract We propose a novel waveguide polarization splitter based on the optical analogue of two-photon Rabi oscillations and stimulated Raman adiabatic passage in a three waveguide directional coupler. Both these processes are borrowed from three level quantum mechanical atomic systems, in which an intermediate level is used to transfer the population from one state to another without any population occupation in the intermediate level. To show the practical feasibility of the device, simulations have been carried out on waveguides in lithium niobate and we show that two orthogonal polarizations can be separated at the output using the proposed three waveguide structures. We also show that the proposed structure is robust against changes in phase mismatch parameters, as well as wavelength of operation.
A novel design for complete transfer and robust three-waveguide coupler is presented in this paper, which employs shortcut to adiabaticity (STA) based on stimulated Raman adiabatic passage (STIRAP). Most recently, some remarkable papers on STA of STIRAP [Phys. Rev. A 94(6), 063411 (2016) and Nat. Comm. 7, 12479 (2016)] have been proposed in both theoretical and experimental configurations. In this paper, we propose to design a novel three-waveguide coupler by employing STA based on STIRAP, which can achieve much shorter device length and also maintain the robust performance against perturbations on device geometry parameters compared to previous devices. This finding significantly improves the performance and fabrication of integrated optical devices to build up more compactable devices.
One of the most fundamental devices for integrated optics is the beam splitter, which is often realized with a directional coupler. However, it is well known that the robustness of such devices against wavelength and/or fabrication parameter variations is limited. Three waveguide couplers based on the quantum-optical analogy of the stimulated Raman Adiabatic Passage (STIRAP) protocol have emerged as a promising solution to the aforementioned issues of device robustness [1, 2]. The tradeoff is that the adiabatic devices are generally longer than their non-adiabatic counterparts. Recently, devices using shortcuts to adiabaticity [3] have been shown to provide alternative robust beam coupling as the adiabatic devices, but at a shorter device length [4]. In this paper, we use the invariant-based inverse engineering [5] to realize a short and robust arbitrary splitting ratio three waveguide beam splitter.
We propose and demonstrate a novel type of optical integrated structure consisting of three adiabatically coupled waveguides arranged in an N-shaped geometry. Unlike conventional adiabatic three-waveguide couplers mimicking the stimulated Raman adiabatic passage process which utilize solely the counter-intuitive coupling and, thus, operate only in one direction, our structure achieves complete bidirectional light transfer between two waveguides through the counter-intuitive and intuitive coupling in either direction over a wide wavelength range. Moreover, the light transfer through the intuitive coupling is more efficient and robust than through the counter-intuitive coupling.