A prerequisite for practical quantum information processing is an efficient source of high-fidelity single photons. We report single photon preparation with a conditional detection efficiency exceeding 51% and detection rate of up to 8.5×105counts/[s·mW].
Highly correlated photons or, accordingly, high-fidelity single-photon states are a prerequisite for closing detection loopholes in experimental tests of local realism and implementing scalable linear optical quantum computation. We demonstrate a parametric down-conversion source exhibiting a conditional detection efficiency of 51 (with corresponding preparation efficiency of 85) and extraordinarily high detection rates of up to $8.5\ifmmode\times\else\texttimes\fi{}{10}^{5}\text{ }\mathrm{c}\mathrm{o}\mathrm{i}\mathrm{n}\mathrm{c}\mathrm{i}\mathrm{d}\mathrm{e}\mathrm{n}\mathrm{c}\mathrm{e}\mathrm{s}/(\mathrm{s}\text{ }\mathrm{m}\mathrm{W})$. We exploit a novel type-II phase matching configuration in a microstructured waveguide in conjunction with an ultrashort pump.
The reliable generation of true single‐photon wavepackets with well‐defined modal structure is a crucial ingredient for the realization of linear optical quantum computing. We have implemented a highly efficient waveguided parametric downconversion source pumped by ultrashort pulses, which is characterized by the spatial decoupling of the signal and idler photon while exhibiting a conditional detection efficiency of 51%, corresponding to a preparation efficiency of 85%. We have performed various tests to confirm the single‐photon character of the conditionally prepared state.
An efficient, scalable source of shaped single photons that can be directly integrated with optical fiber networks and quantum memories is at the heart of many protocols in quantum information science. We demonstrate a deterministic source of arbitrarily temporally shaped single-photon pulses with high efficiency [detection efficiency=14.9%] and purity [g^{(2)}(0)=0.0168] and streams of up to 11 consecutively detected single photons using a silicon-vacancy center in a highly directional fiber-integrated diamond nanophotonic cavity. Combined with previously demonstrated spin-photon entangling gates, this system enables on-demand generation of streams of correlated photons such as cluster states and could be used as a resource for robust transmission and processing of quantum information.
A reliable single photon source is a prerequisite for linear optical quantum computation and for secure quantum key distribution. A criterion yielding a conclusive test of the single photon character of a given source, attainable with realistic detectors, is therefore highly desirable. In the context of heralded single photon sources, such a criterion should be sensitive to the effects of higher photon number contributions, and to vacuum introduced through optical losses, which tend to degrade source performance. In this Rapid Communication we present, theoretically and experimentally, a criterion meeting the above requirements.
Over the last sixty years, classical information theory has revolutionized the understanding of the nature of information, and how it can be quantified and manipulated. Quantum information processing extends these lessons to quantum systems, where the properties of intrinsic uncertainty and entanglement fundamentally defy classical explanation. This growing field has many potential applications, including computing, cryptography, communication, and metrology. As inherently mobile quantum particles, photons are likely to play an important role in any mature large-scale quantum information processing system. However, the available methods for producing and detecting complex multi-photon states place practical limits on the feasibility of sophisticated optical quantum information processing experiments. In a typical quantum information protocol, a source first produces an interesting or useful quantum state (or set of states), perhaps involving superposition or entanglement. Then, some manipulations are performed on this state, perhaps involving quantum logic gates which further manipulate or entangle the intial state. Finally, the state must be detected, obtaining some desired measurement result, e.g., for secure communication or computationally efficient factoring. The work presented here concerns the first and last stages of this process as they relate to photons: sources and detectors. Our work on sources is based on the need for optimized non-classical states of light delivered at high rates, particularly of single photons in a pure quantum state. We seek to better understand the properties of spontaneous parameteric downconversion (SPDC) sources of photon pairs, and in doing so, produce such an optimized source. We report an SPDC source which produces pure heralded single photons with little or no spectral filtering, allowing a significant rate enhancement. Our work on detectors is based on the need to reliably measure single-photon states. We have focused on optimizing the detection efficiency of visible light photon counters (VLPCs), a single-photon detection technology that is also capable of resolving photon number states. We report a record-breaking quantum efficiency of 91 +/- 3% observed with our detection system. Both sources and detectors are independently interesting physical systems worthy of study, but together they promise to enable entire new classes and applications of information based on quantum mechanics.
Linear optics, combined with practical photon source and single-photon detectors, has provided a powerful tool to test a number of quantum information protocols. In the linear optics implementations, the post-selection technique based on photon detections typically plays a critical role. As one scales up the system, the post-selection technique generally leads to very inefficient (exponential) scaling of the overall efficiency, which limits the implementation to small systems. In the past few years, two approaches have been proposed to circumvent this obstacle for different kinds of quantum information processing. In the first approach, a remarkable proposal, generally referred to as linear optics quantum computation, was first put forward by Knill, Laflamme, and Mil-burn (KLM) [1] and then improved by a number of others. In this approach, one overcomes the scaling problem for linear optics computation through quantum error correction by requiring the efficiencies for the photon source and the detectors to attain a high threshold value [1]. The threshold efficiency has been improved considerably in the past few years, with the most recent estimate about Linear optics, combined with practical photon source and single-photon detectors, has provided a powerful tool to test a number of quantum information protocols. In the linear optics implementations, the post-selection technique based on photon detections typically plays a critical role. As one scales up the system, the post-selection technique generally leads to very inefficient (exponential) scaling of the overall efficiency, which limits the implementation to small systems. In the past few years, two approaches have been proposed to circumvent this obstacle for different kinds of quantum information processing. In the first approach, a remarkable proposal, generally referred to as linear optics quantum computation, was first put forward by Knill, Laflamme, and Mil-burn (KLM) [1] and then improved by a number of others. In this approach, one overcomes the scaling problem for linear optics computation through quantum error correction by requiring the efficiencies for the photon source and the detectors to attain a high threshold value [1]. The threshold efficiency has been improved considerably in the past few years, with the most recent estimate about 99.4%− 99.7% [2]. In the second approach proposed in Ref. [3], one uses linear optics for implementation of scalable quantum communication through the quantum repeater protocol. This approach overcomes the inefficient scaling through the divide-and-conquer method. In this protocol, one does not have a threshold requirement on the source and the detector efficiencies, which allows its implementation with the state-of-the-art photon detectors.