Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Measurement of the recoil shift of saturation resonances of I2127 at 5145 Å: A test of accuracy for high-resolution saturation spectroscopy

Ch. J. Bordé, G. Camy, Bernard Decomps

Published Jul 1, 1979• 65 citations
Publisher

Abstract

We report the first observation of the recoil shift of an optical resonance in the visible part of the spectrum. The method rests on the fact that the recoil shifts have opposite signs for Doppler-generated level crossings with a common upper level and for those having a common lower level. The experiment has been performed with the argon laser at 5145 \AA{} as the source and iodine as the absorber. The measured values are within 12% of the theoretical recoil shift. We give a detailed discussion of the possible influence of shifts of various origins and especially light shifts on the measured frequency differences. We display saturated absorption and saturated dispersion spectra and give formulas for the intensities of the various resonances derived from the corresponding density-matrix diagrams.

DOI
10.1103/physreva.20.254

Related papers

Modélisation des résonances de croisement dans les spectres d'absorption saturée et application aux spectres du fer et du ruthénium à 372 nm

Joseph Lombardo

The aim of this master thesis was to study the problem of crossover resonances in saturation spectra. In a typical saturation spectroscopy experiment, two counterpropagating laser beams with same frequency interact with a gas of atoms or molecules. As the frequency is in resonance with an atomic transition, both beams interact only with the zero-velocity group of atoms. As one of the beams (called pump beam) is saturating the atomic transition of concern, the second beam (called probe beam) cannot be absorb by these atoms, creating a Doppler-free dip in the absorption spectra at the resonance frequency. Crossover resonances are spurious resonances which appear when both beams interact with two different transitions corresponding to two nonzero-velocity groups when the frequency of the beams is tuned at the exact average frequency between both transitions. These peculiar resonances can be positive or negative according to the configuration of the atomic levels involved. Predicting the exact relative intensity of such resonances is a difficult task. Indeed, one have to take into account several process such as optical pumping between hyperfine levels or Zeeman levels, atomic alignment, collisional processes, etc. All these phenomena can indeed have an influence on the atomic population of the levels involved and so determine the relative intensity of both true transitions or crossovers. A part of this master thesis was dedicated to an original review on these resonances and on the effects which have an influence on them. Two models have been used to simulate saturation spectra of the transition at 379.99 nm of iron and the transition at 372.8 nm of ruthenium. The first model uses the so-called “Bordé&Bordé” formula (J. Bordé and C. Bordé, J. Mol. Spectrosc. 7, 353 (1979)) which can be directly applied for generating simulations. The second is an original generalization of the optical Bloch equations for atoms with a hyperfine structure and an arbitrary number of states. The saturation spectrum of iron at 371.99 nm is well known (S. Krins, S. Oppel, N. Huet, J. von Zanthier, and T. Bastin, Phys. Rev. A 80, 062508 (2009)). However, no study has yet been done on the transition at 372.8 nm of ruthenium. To perform simulations, the specific mass shift coefficient, the field shift coefficient as well as the hyperfine structure constant and the quadrupolar coupling constant for this atom at the frequency of interest have been estimated during this master thesis. Simulations show good qualitative agreement with the spectrum of iron for both models. Since Bordé&Bordé formula cannot be applied for crossover resonances occurring when both transitions do not share a common level, only one dip is not reproduced by this model. The generalized optical Bloch equations predict correctly the sign of all crossover resonances. Concerning the spectrum of ruthenium, both models show same features, but any qualitative comparison with experimental spectra could have been done because of the lack of spectra taken with optimal parameters. However, simulations seem to show that although the numbers of crossovers is larger in this case, their contribution to the total spectrum is small. Further studies should be directed towards an improvement of the generalized optical Bloch equations for example to take into account effects of Zeeman pumping or collisional processes. Experimental studies in the case of ruthenium should also allow to a better estimation of spectroscopic parameters for this transition and could allow us to confront our simulations to new data.

•Jan 1, 2015•0 citations

Observation of large atomic-recoil-induced asymmetries in cold atom spectroscopy

Chris W. Oates, G. Wilpers, Leo W. Hollberg

The atomic-recoil effect leads to large (25%) asymmetries in a nearly ideal form of saturation spectroscopy based on Ca atoms that have been laser-cooled to . Starting with spectra from the more familiar Doppler-broadened domain, we show how the fundamental asymmetry between absorption and stimulated emission of light manifests itself when shorter spectroscopic pulses lead to the Fourier transform regime. These effects occur on frequency scales much larger than the size of the recoil shift itself, and have not been described before in saturation spectroscopy. These results directly impact precision spectroscopic measurements.

arXiv:physics/0401011•Physical Review A•Feb 10, 2005•22 citations

Straightforward Measurement of Saturation Intensity of Doppler-Broadened Transitions: Application to Rubidium Vapour

Omid Mozafar, Varun Sharma, R. Margoth Córdova‐Castro +3 more

The commonly quoted saturation intensity of rubidium (Rb) for D2 transitions is 16.7$\mathrm{W}.\mathrm{m}^{-2}$. This value, however, is only accurate for the cycling transition, which renders the Rb atom to resemble a two-level system. In practice, the effective saturation intensity is influenced by various factors, such as the polarization of light, optical pumping, and atom collision which can redistribute the population. As a result, it is crucial to experimentally determine the effective saturation intensity. In this context, we demonstrate a novel yet simple experimental method to measure the effective saturation intensities of Doppler-broadened transitions in atomic vapours. Our method only requires on-resonance absorbance data for various input laser intensities, which can be obtained with a tunable CW laser without the need for precise frequency locking. We applied this method to measure the effective saturation intensities of all four Doppler-broadened D2 transitions in natural rubidium (Rb) vapour (27.8%87Rb and 72.2 %${}^{\text{8}} {}^{\text{5}}Rb$) at$r={35}^{\circ} \mathrm{C}$. The results show that the effective saturation intensities for Rb range from 0.752 to 16.8$\mathrm{W}.\mathrm{m}^{-2}$. Notably, for certain transitions (specifically, repump transitions), the effective saturation intensities were smaller than 16.7 W.$\mathrm{m}^{-2}$(up to an order of magnitude), with potentially important implications for optical pumping in Doppler-broadened transitions.

Photonics North (PN)•May 28, 2024•0 citations

Spectroscopy of atoms and molecules in gases: Corrections to the Doppler-recoil shift

Mark P. Haugan, Frank V. Kowalski

We analyze the excitation by an electromagnetic wave of a two-level molecule (or atom) within a rarefied gas. This process differs from the excitation of an isolated molecule because there is significant interaction between the molecule and the surrounding gas particles as they are all polarized by the electromagnetic wave. These interactions lead to corrections to the recoil and Doppler shifts of the molecule's transition frequency. We propose an experiment using saturation spectroscopy to observe sodium molecular transitions near the atomic $D$ lines which could easily detect the correction to the first-order Doppler shift caused by the interaction between the sodium molecules and the surrounding atomic vapor.

Physical Review A•Apr 1, 1982•6 citations

Optical pumping and saturation effects in laser excited barium vapour

J. LEONARD BOWEN

The behaviour of an optically thick column of barium vapour resonantly 10 -2 illuminated at 553.5m by a 50 ns, 10 Wm pulse from a flashlamp pumped dye 19 21 -3 laser system was investigated for barium number densities in the range 10 -10 m in the presence of He buffer gas at 100 Torr.A variety of optical saturation effects associated with the principal resonance transition were studied.In marked contrast to earlier work, saturation of the intensity of the scattered light near 553.5 nm with increasing laser power was found for a suitable geometry of the collection optics but at a laser intensity typically two orders of magnitude higher than that predicted by simple theory, despite the fact that this theory was found to describe correctly transmission measurements along the length of the vapour column.The apparent contradiction between the fluorescence and transmission results, which indicated that the scattered radiation intensity continued to rise with incident laser power, despite the population of the upper resonance level having reached a limiting saturation value, could be understood in terms of a simple model which took into consideration the spectral distribution of the scattered light and its transfer through the unexcited vapour.However, in common with other similar experiments, saturation of the scattered radiation intensity with laser power could not be totally achieved when a more usual collection optics geometry was employed.This was interpreted as a consequence of laser intensity variation across the face of the laser beam.A number of subsidiary experiments were performed.These included spatially resolved intensity measurements of the scattered radiation and time resolved metastable level population measurements.In addition, evidence for laser induced ionization was sought using two different methods and this enabled an upper limit of 10% ionization to be placed on the experiments in the present work.

•Jan 1, 1982•0 citations

Optical heterodyne saturation spectroscopy

J. L. Hall, Leo W. Hollberg, T. Baer +1 more

We discuss a refined, hybrid rf/optical technique for studying sub-Doppler saturated absorption/dispersion resonances with excellent precision and symmetry. Sensitivity is limited mainly by fundamental noise in the signal. Resonance profiles obtained in I2 are in remarkable agreement with theory. The method promises a new level of accuracy for laser locking to an optical resonance.

Applied Physics Letters•Nov 1, 1981•334 citations
We report the first observation of the recoil shift of an optical resonance in the visible part of the spectrum. The method rests on the fact that the recoil shifts have opposite signs for Doppler-generated level crossings with a common upper level and for those having a common lower level. The experiment has been performed with the argon laser at 5145 \AA{} as the source and iodine as the absorber. The measured values are within 12% of the theoretical recoil shift. We give a detailed discussion of the possible influence of shifts of various origins and especially light shifts on the measured frequency differences. We display saturated absorption and saturated dispersion spectra and give formulas for the intensities of the various resonances derived from the corresponding density-matrix diagrams.
The aim of this master thesis was to study the problem of crossover resonances in saturation spectra. In a typical saturation spectroscopy experiment, two counterpropagating laser beams with same frequency interact with a gas of atoms or molecules. As the frequency is in resonance with an atomic transition, both beams interact only with the zero-velocity group of atoms. As one of the beams (called pump beam) is saturating the atomic transition of concern, the second beam (called probe beam) cannot be absorb by these atoms, creating a Doppler-free dip in the absorption spectra at the resonance frequency. Crossover resonances are spurious resonances which appear when both beams interact with two different transitions corresponding to two nonzero-velocity groups when the frequency of the beams is tuned at the exact average frequency between both transitions. These peculiar resonances can be positive or negative according to the configuration of the atomic levels involved. Predicting the exact relative intensity of such resonances is a difficult task. Indeed, one have to take into account several process such as optical pumping between hyperfine levels or Zeeman levels, atomic alignment, collisional processes, etc. All these phenomena can indeed have an influence on the atomic population of the levels involved and so determine the relative intensity of both true transitions or crossovers. A part of this master thesis was dedicated to an original review on these resonances and on the effects which have an influence on them. Two models have been used to simulate saturation spectra of the transition at 379.99 nm of iron and the transition at 372.8 nm of ruthenium. The first model uses the so-called “Bordé&Bordé” formula (J. Bordé and C. Bordé, J. Mol. Spectrosc. 7, 353 (1979)) which can be directly applied for generating simulations. The second is an original generalization of the optical Bloch equations for atoms with a hyperfine structure and an arbitrary number of states. The saturation spectrum of iron at 371.99 nm is well known (S. Krins, S. Oppel, N. Huet, J. von Zanthier, and T. Bastin, Phys. Rev. A 80, 062508 (2009)). However, no study has yet been done on the transition at 372.8 nm of ruthenium. To perform simulations, the specific mass shift coefficient, the field shift coefficient as well as the hyperfine structure constant and the quadrupolar coupling constant for this atom at the frequency of interest have been estimated during this master thesis. Simulations show good qualitative agreement with the spectrum of iron for both models. Since Bordé&Bordé formula cannot be applied for crossover resonances occurring when both transitions do not share a common level, only one dip is not reproduced by this model. The generalized optical Bloch equations predict correctly the sign of all crossover resonances. Concerning the spectrum of ruthenium, both models show same features, but any qualitative comparison with experimental spectra could have been done because of the lack of spectra taken with optimal parameters. However, simulations seem to show that although the numbers of crossovers is larger in this case, their contribution to the total spectrum is small. Further studies should be directed towards an improvement of the generalized optical Bloch equations for example to take into account effects of Zeeman pumping or collisional processes. Experimental studies in the case of ruthenium should also allow to a better estimation of spectroscopic parameters for this transition and could allow us to confront our simulations to new data.
The atomic-recoil effect leads to large (25%) asymmetries in a nearly ideal form of saturation spectroscopy based on Ca atoms that have been laser-cooled to . Starting with spectra from the more familiar Doppler-broadened domain, we show how the fundamental asymmetry between absorption and stimulated emission of light manifests itself when shorter spectroscopic pulses lead to the Fourier transform regime. These effects occur on frequency scales much larger than the size of the recoil shift itself, and have not been described before in saturation spectroscopy. These results directly impact precision spectroscopic measurements.
The commonly quoted saturation intensity of rubidium (Rb) for D2 transitions is 16.7W.m−2\mathrm{W}.\mathrm{m}^{-2}W.m−2. This value, however, is only accurate for the cycling transition, which renders the Rb atom to resemble a two-level system. In practice, the effective saturation intensity is influenced by various factors, such as the polarization of light, optical pumping, and atom collision which can redistribute the population. As a result, it is crucial to experimentally determine the effective saturation intensity. In this context, we demonstrate a novel yet simple experimental method to measure the effective saturation intensities of Doppler-broadened transitions in atomic vapours. Our method only requires on-resonance absorbance data for various input laser intensities, which can be obtained with a tunable CW laser without the need for precise frequency locking. We applied this method to measure the effective saturation intensities of all four Doppler-broadened D2 transitions in natural rubidium (Rb) vapour (27.8%87Rb and 72.2 %85Rb{}^{\text{8}} {}^{\text{5}}Rb85Rb) atr=35∘Cr={35}^{\circ} \mathrm{C}r=35∘C. The results show that the effective saturation intensities for Rb range from 0.752 to 16.8W.m−2\mathrm{W}.\mathrm{m}^{-2}W.m−2. Notably, for certain transitions (specifically, repump transitions), the effective saturation intensities were smaller than 16.7 W.m−2\mathrm{m}^{-2}m−2(up to an order of magnitude), with potentially important implications for optical pumping in Doppler-broadened transitions.
We analyze the excitation by an electromagnetic wave of a two-level molecule (or atom) within a rarefied gas. This process differs from the excitation of an isolated molecule because there is significant interaction between the molecule and the surrounding gas particles as they are all polarized by the electromagnetic wave. These interactions lead to corrections to the recoil and Doppler shifts of the molecule's transition frequency. We propose an experiment using saturation spectroscopy to observe sodium molecular transitions near the atomic DDD lines which could easily detect the correction to the first-order Doppler shift caused by the interaction between the sodium molecules and the surrounding atomic vapor.
The behaviour of an optically thick column of barium vapour resonantly 10 -2 illuminated at 553.5m by a 50 ns, 10 Wm pulse from a flashlamp pumped dye 19 21 -3 laser system was investigated for barium number densities in the range 10 -10 m in the presence of He buffer gas at 100 Torr.A variety of optical saturation effects associated with the principal resonance transition were studied.In marked contrast to earlier work, saturation of the intensity of the scattered light near 553.5 nm with increasing laser power was found for a suitable geometry of the collection optics but at a laser intensity typically two orders of magnitude higher than that predicted by simple theory, despite the fact that this theory was found to describe correctly transmission measurements along the length of the vapour column.The apparent contradiction between the fluorescence and transmission results, which indicated that the scattered radiation intensity continued to rise with incident laser power, despite the population of the upper resonance level having reached a limiting saturation value, could be understood in terms of a simple model which took into consideration the spectral distribution of the scattered light and its transfer through the unexcited vapour.However, in common with other similar experiments, saturation of the scattered radiation intensity with laser power could not be totally achieved when a more usual collection optics geometry was employed.This was interpreted as a consequence of laser intensity variation across the face of the laser beam.A number of subsidiary experiments were performed.These included spatially resolved intensity measurements of the scattered radiation and time resolved metastable level population measurements.In addition, evidence for laser induced ionization was sought using two different methods and this enabled an upper limit of 10% ionization to be placed on the experiments in the present work.