Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Gain and phase-conjugation fidelity of a four-wave Brillouin mirror based on methane

Rolf W. F. Gross, Sherwin T. Amimoto, Lissa Garman-DuVall

Published Jan 15, 1991• 5 citations
Publisher

Abstract

We report measurements of the gain and phase-conjugation fidelity of a nondegenerate four-wave Brillouin mirror (FWBM) based on high-pressure methane. In the experiments we used a Nd:YAG laser that produced single-mode pulses of 13-nsec duration. Depending on the energy of the pump we measured signal reflectivities between 10 and 10(3), constant over six orders of magnitude of signal energy. We also determined the conjugation fidelity of the FWBM by measuring the Strehl ratio of the conjugated return as a function of the energy of the input signal. We show that the Strehl ratio reduces to 0.5 for an input energy of 1.5 x 10(-13) J/mode of the FWBM. This noise-equivalent signal energy constitutes the limiting sensitivity of the FWBM. Our experiments show that a gas-filled FWBM could be used as a phase conjugator and high-repetition-rate optical image intensifier.

DOI
10.1364/ol.16.000094

Related papers

Optical Phase Conjugation Enhanced by the Brillouin Interaction.

Mark D. Skeldon

This thesis provides an in-depth study of the Brillouin interaction and how it can be exploited to enhance other nonlinear optical processes. The work begins with a detailed derivation of the equations of motion describing the stimulated Brillouin scattering (SBS) process. The derivation applies the principles of conservation of momentum and energy to a fluid particle in the medium, and evolves into a complete mathematical description of the SBS process including optical absorption and thermal effects. Predictions of the important parameters for this process, such as the SBS gain and reflectivity are given for the cases of a single and multimode laser. When using a multimode laser it is shown under what conditions the SBS gain and reflectivity are unaffected by the number of modes in the pump laser. Experiments carried out in this limit confirm the theoretical predictions. A novel scheme for combining SBS and conventional four-wave mixing into what is called Brillouin-enhanced four-wave mixing is discussed both theoretically and experimentally. This new geometry for producing a phase-conjugate signal is capable of combining the good features of both the SBS and four-wave mixing processes, while eliminating the undesirable features of these processes. This Brillouin-enhanced four-wave mixing process produces a phase-conjugate mirror with reflectivities greater than 100%, with no frequency shift on reflection, and produces a high-fidelity phase-conjugate signal even when using aberrated pump waves. Experimental verification of all these features is demonstrated. A phase-conjugate oscillator consisting of a conventional mirror and a phase-conjugate mirror based on Brillouin-enhanced four-wave mixing has been constructed. The beam divergence and near-field spot size of this oscillator has been measured for various cavity lengths and radii of curvature of the conventional mirror. A theoretical analysis of the mode structure of this oscillator has been performed assuming a Gaussian reflectivity profile for the phase-conjugate mirror. The beam-parameter measurements made on the experimental phase-conjugate oscillators are in good agreement with our theoretical analysis

•Jan 1, 1988•0 citations

Phase conjugation through Brillouin-enhanced four-wave mixing over an extended atmospheric path

Paul S. Lebow, John R. Ackerman

We report what is to our knowledge the first demonstration of Brillouin-enhanced four-wave mixing over a long atmospheric path. Weak laser light reflected from a remote retroreflector was input to a high-gain conjugate mirror. The resulting amplified output returns to the retroreflector owing to its phase-conjugate nature. Despite atmospheric effects the phase-conjugate return energy measured at the retroreflector increased by a factor of 10(4) over the initial weak beam.

Optics Letters•Feb 15, 1989•21 citations

Single-frequency phase-conjugate laser resonator using stimulated Brillouin scattering

Michael J. Damzen, Marcus H. R. Hutchinson, W. A. Schroeder

An experimental investigation of a phase-conjugate laser resonator using a Nd:YAG gain medium and incorporating Brillouin-enhanced four-wave mixing is reported. Phase-conjugate reflectivities of greater than unity and stable oscillation between a single laser frequency and a counterpropagating Stokes frequency are demonstrated.

Optics Letters•Jan 1, 1987•12 citations

Non-frequency-shifted, high-fidelity phase conjugation with aberrated pump waves by Brillouin-enhanced four-wave mixing

Mark D. Skeldon, Paul Narum, Robert W. Boyd

The results of an experimental investigation of a new geometry for producing phase conjugation by Brillouin-enhanced four-wave mixing are presented. In this geometry, the four-wave mixing medium is carbon disulfide, and the backward-going pump wave is created from the transmitted forward-going pump wave by stimulated Brillouin scattering (SBS) in glycerol. The two pump waves are hence phase conjugates of each other, and the quality of the phase-conjugation process is not degraded even by the use of an aberrated pump wave. The probe wave is created by SBS in carbon disulfide, which has a Brillouin frequency half that of glycerol, and the conjugate wave is therefore generated at the same frequency as the probe. Since the pump and signal waves differ in frequency by the Brillouin frequency of the carbon disulfide four-wave mixing medium, high reflectivities (approximately 2000%) are obtained as a result of Brillouin resonance enhancement.

Optics Letters•May 1, 1987•34 citations

Bandwidth effects on Brillouin enhanced four-wave mixing

Y. S. Kuo, J. K. McIver

Brillouin enhanced four-wave mixing (BEFWM) is a judicious combination of SBS and FWM processes. Very high phase conjugate reflectivity (>106) has been reported. Various conditions have been presented that lead to these high reflectivities, but all those discussions are based on a single mode laser. Here we report the experimental results of BEFWM with a multimode laser. The laser mode spacing is 0.15 GHz, which is larger than the linewidth of the acoustic phonon (0.1 GHz), so we can neglect the gratings that are not resonant with the acoustic frequency. We observed that the phase conjugate reflectivity is smaller for the multimode pump. Assume there is no coupling between modes through BEFWM and each mode interacts with the nonlinear medium independently. It has been shown that the reflectivity will decrease as the input pump power decreases. Thus the reflectivity of a single mode pump is higher than the resultant reflectivity from a multimode pump. Further examination of the temporal profiles of the probe and phase conjugate pulses in the multimode case shows that the pulse modulation depth is decreased in the phase conjugate pulse.

Annual Meeting Optical Society of America•Jan 1, 1992•0 citations

A perturbation analysis of polarization-decoupled Brillouin-enhanced four-wave mixing

Richard B. Holmes

The technique of polarization-decoupled Brillouin-enhanced four-wave mixing is known for its high-reflectivity, high-quality phase conjugation. The treatment accounts for the transverse structure of the pump and signal beams within a waveguide in the paraxial approximation, assuming a steady-state acoustic wave and assuming that many transverse modes of the waveguide are excited by the four mixing waves. The zeroth-order equations are obtained for the polarization states of the signal and conjugate beams by dropping all phase-mismatch terms. Under the stated assumptions, the phase-mismatched terms are found to make only a small contribution. A first-order solution accounts for phase-mismatch terms and determines the loss of conjugation fidelity as a function of the angular spread of the pump laser beam, the pump-signal angle, the pump intensities, and the pump mutual fidelity.>

IEEE Journal of Quantum Electronics•Jan 1, 1990•2 citations
We report measurements of the gain and phase-conjugation fidelity of a nondegenerate four-wave Brillouin mirror (FWBM) based on high-pressure methane. In the experiments we used a Nd:YAG laser that produced single-mode pulses of 13-nsec duration. Depending on the energy of the pump we measured signal reflectivities between 10 and 10(3), constant over six orders of magnitude of signal energy. We also determined the conjugation fidelity of the FWBM by measuring the Strehl ratio of the conjugated return as a function of the energy of the input signal. We show that the Strehl ratio reduces to 0.5 for an input energy of 1.5 x 10(-13) J/mode of the FWBM. This noise-equivalent signal energy constitutes the limiting sensitivity of the FWBM. Our experiments show that a gas-filled FWBM could be used as a phase conjugator and high-repetition-rate optical image intensifier.
This thesis provides an in-depth study of the Brillouin interaction and how it can be exploited to enhance other nonlinear optical processes. The work begins with a detailed derivation of the equations of motion describing the stimulated Brillouin scattering (SBS) process. The derivation applies the principles of conservation of momentum and energy to a fluid particle in the medium, and evolves into a complete mathematical description of the SBS process including optical absorption and thermal effects. Predictions of the important parameters for this process, such as the SBS gain and reflectivity are given for the cases of a single and multimode laser. When using a multimode laser it is shown under what conditions the SBS gain and reflectivity are unaffected by the number of modes in the pump laser. Experiments carried out in this limit confirm the theoretical predictions. A novel scheme for combining SBS and conventional four-wave mixing into what is called Brillouin-enhanced four-wave mixing is discussed both theoretically and experimentally. This new geometry for producing a phase-conjugate signal is capable of combining the good features of both the SBS and four-wave mixing processes, while eliminating the undesirable features of these processes. This Brillouin-enhanced four-wave mixing process produces a phase-conjugate mirror with reflectivities greater than 100%, with no frequency shift on reflection, and produces a high-fidelity phase-conjugate signal even when using aberrated pump waves. Experimental verification of all these features is demonstrated. A phase-conjugate oscillator consisting of a conventional mirror and a phase-conjugate mirror based on Brillouin-enhanced four-wave mixing has been constructed. The beam divergence and near-field spot size of this oscillator has been measured for various cavity lengths and radii of curvature of the conventional mirror. A theoretical analysis of the mode structure of this oscillator has been performed assuming a Gaussian reflectivity profile for the phase-conjugate mirror. The beam-parameter measurements made on the experimental phase-conjugate oscillators are in good agreement with our theoretical analysis
The results of an experimental investigation of a new geometry for producing phase conjugation by Brillouin-enhanced four-wave mixing are presented. In this geometry, the four-wave mixing medium is carbon disulfide, and the backward-going pump wave is created from the transmitted forward-going pump wave by stimulated Brillouin scattering (SBS) in glycerol. The two pump waves are hence phase conjugates of each other, and the quality of the phase-conjugation process is not degraded even by the use of an aberrated pump wave. The probe wave is created by SBS in carbon disulfide, which has a Brillouin frequency half that of glycerol, and the conjugate wave is therefore generated at the same frequency as the probe. Since the pump and signal waves differ in frequency by the Brillouin frequency of the carbon disulfide four-wave mixing medium, high reflectivities (approximately 2000%) are obtained as a result of Brillouin resonance enhancement.
Brillouin enhanced four-wave mixing (BEFWM) is a judicious combination of SBS and FWM processes. Very high phase conjugate reflectivity (>106) has been reported. Various conditions have been presented that lead to these high reflectivities, but all those discussions are based on a single mode laser. Here we report the experimental results of BEFWM with a multimode laser. The laser mode spacing is 0.15 GHz, which is larger than the linewidth of the acoustic phonon (0.1 GHz), so we can neglect the gratings that are not resonant with the acoustic frequency. We observed that the phase conjugate reflectivity is smaller for the multimode pump. Assume there is no coupling between modes through BEFWM and each mode interacts with the nonlinear medium independently. It has been shown that the reflectivity will decrease as the input pump power decreases. Thus the reflectivity of a single mode pump is higher than the resultant reflectivity from a multimode pump. Further examination of the temporal profiles of the probe and phase conjugate pulses in the multimode case shows that the pulse modulation depth is decreased in the phase conjugate pulse.
The technique of polarization-decoupled Brillouin-enhanced four-wave mixing is known for its high-reflectivity, high-quality phase conjugation. The treatment accounts for the transverse structure of the pump and signal beams within a waveguide in the paraxial approximation, assuming a steady-state acoustic wave and assuming that many transverse modes of the waveguide are excited by the four mixing waves. The zeroth-order equations are obtained for the polarization states of the signal and conjugate beams by dropping all phase-mismatch terms. Under the stated assumptions, the phase-mismatched terms are found to make only a small contribution. A first-order solution accounts for phase-mismatch terms and determines the loss of conjugation fidelity as a function of the angular spread of the pump laser beam, the pump-signal angle, the pump intensities, and the pump mutual fidelity.>