In photography, information is stored in a medium which is essentially two-dimensional. Three-dimensional optical storage is possible in semitransparent colored materials, like alkali halides with color centers. With the use of coherent light sources, like lasers, large amounts of information can be stored in the volume, and retrieved with little interference. The storage of information is accomplished by the formation of interference patterns between each two plane parallel waves. This paper develops the theory of this form of storage. It turns out that the information storage capacity is as if every little cube with sides equal to the wavelength of light acts as an independent information storage cell, and the essential noise in recovering this information is only the statistical fluctuation in the number of color centers in such a cube. The storage capacity is therefore of the order of 1012–1013 bits per cm3. The main property of this way of information storage is the appearance of a “ghost image,” partly but not completely analogous to the one described previously. This property makes three-dimensional storage very suitable for associative memories. The theory lends support to Beurle’s proposed mechanism of information storage in the brain.
In photography, information is stored in a medium which is essentially two-dimensional. Three-dimensional optical storage is possible in semitransparent colored materials, like alkali halides with color centers. With the use of coherent light sources, like lasers, large amounts of information can be stored in the volume, and retrieved with little interference. The storage of information is accomplished by the formation of interference patterns between each two plane parallel waves. This paper develops the theory of this form of storage. It turns out that the information storage capacity is as if every little cube with sides equal to the wavelength of light acts as an independent information storage cell, and the essential noise in recovering this information is only the statistical fluctuation in the number of color centers in such a cube. The storage capacity is therefore of the order of 1012–1013 bits per cm3. The main property of this way of information storage is the appearance of a “ghost image,” partly but not completely analogous to the one described previously. This property makes three-dimensional storage very suitable for associative memories. The theory lends support to Beurle’s proposed mechanism of information storage in the brain.
In photography, information is stored in a medium which is essentially two-dimensional. Three-dimensional optical storage is possible in semitransparent colored materials, like alkali halides with color centers. With the use of coherent light sources, like lasers, large amounts of information can be stored in the volume, and retrieved with little interference. The storage of information is accomplished by the formation of interference patterns between each two plane parallel waves. This paper develops the theory of this form of storage. It turns out that the information storage capacity is as if every little cube with sides equal to the wavelength of light acts as an independent information storage cell, and the essential noise in recovering this information is only the statistical fluctuation in the number of color centers in such a cube. The storage capacity is therefore of the order of 10 12 –l0 13 bits per cm 3 . The main property of this way of information storage is the appearance of a “ghost image,” partly but not completely analogous to the one described previously. This property makes three-diamensional storage very suitable for associative memories. The theory lends support to Bearle's proposed mechanism of information storage in the brain.
The ultimate memory device would be one in which a bit of data is stored in every atom or molecule within a storage material. Such a memory would have an incredible storage capacity of somewhere in the range of 1022 bits/cm3. Traditional optical memories, whether two- or three-dimensional, can never hope to achieve atomic-level storage densities for the simple reason that minimally sized storage cells always have edge dimensions on the order of or larger than the wavelength of light employed. In the case of visible light, cubic wavelength scale storage volumes contain billions of atoms.
Optical data recording is one of the most widely used and efficient systems of memory in the non-living world. The application of color centers in this context offers not only systems of high speed in writing and read-out due to a high degree of parallelism in data handling but also a possibility to set up models of neural networks. In this way, systems with a high potential for image processing, pattern recognition and logical operations can be constructed. A limitation to storage density is given by the diffraction limit of optical data recording. It is shown that this limitation can at least in principle be overcome by the principle of spectral hole burning, which results in systems of storage capacities close to the human brain system.
Two-photon absorption 3-D optical memories have the potential for simple media fabrication, parallel access for high data transfer rates, high volumetric storage density, and low raw bit error rates (BER).1-2 The writing or erasure takes place at the intersection of two orthogonally propagating beams where a unique physical location is allocated to each stored bit. The data can be stored and retrieved in several formats in a single operation. By using either orthogonal-propagating beams or counter-propagating beams, it is possible to control the region of overlap of the two beams to be a single point, a line, or a plane. We will refer to those data formats as bit, vector, and image (or page) storage.
Physics
Photons are ideal carriers of information. They are fast and coherent, and because they don't interact much with each other they can have very long lifetimes. However, stopping, processing, and manipulating the photons requires them to be stored in a memory, where doing so can damage their fragile quantum properties, which leads to a loss of coherence. Although photons have been coherently stored in and retrieved from ensembles of atom gases, both warm and cold atom clouds, for practical applications a solid-state memory would be desired. Heinze et al. have developed a method to enhance the storage time of photons in a rare-earth–ion—doped crystal. They use a series of laser pulses to initialize the crystal for photon storage and then load it with their “information photons.” By iteratively optimizing the experimental parameters, they show that they can store light pulses and even entire images in the crystal and then retrieve them up to a minute later with their coherent properties intact. The results present an important step toward building a viable quantum network.
Phys. Rev. Lett. 111 , 033601(2013).
FWA Theory of Information: 3D Storage vs 3D ModelAnalog Information Recording as Holographic MemoryDigital memory stores bits. Analog memory stores fields. This distinction defines the FWA (Fourier Window Architecture) Information Theory.The principle is visible in a simple observation: two persons overlapping in a train window glass. The glass acts as a combiner. One person is the Object beam Eo, the second is the Reference beam Er. The glass displays I(r) = |Eo + Er|^2. This is not a picture. It is interference. This is how analog information is recorded.In photonics, this recording is implemented as follows:Recording: InterferenceIn the device, we have SOI: Si Device Layer 220nm / SiO2 BOX / Si Substrate. Four microrings R=20um (A,B,C,D) provide coherent fields.Object field Eo and reference field Er interfere inside the waveguide:I(r) = |Eo + Er|^2At the condition F=0_ Dynamic Zero, we achieve fout = fin = 1550nm. The system reaches symmetry. This is the Stable Square Window Memory. fout is the Through Port, fin is the Input.This is analogous to the train glass: two fields in one window.Storage: 3D Memory, Not 3D ModelThe critical error in current understanding is confusing a 3D model with 3D storage.Figure 1: Dragonfly Fourier Epicycles, N=1536 circles. This is x(t),y(t) — a 2D path. It is a linear quantum. It is volatile: E(r,t) exists only while light is on. When light is off, E(r,t)=0, form disappears. This is a model.Figure 2: FWA Square Window Memory, N=4. This is Delta n(r) — a 3D cube. It is a nonlinear quantum. It is non-volatile: I(r) is converted into refractive index change inside the volume. When light is off, Delta n(r) != 0 remains. This is storage.Information is not a 3D model. Information is stored 3D in memory.Thermally, this follows Kirchhoff's law for a real surface:alpha + rho + tau = 1where:epsilon = E/Eb — emissivityrho = Gr/G — reflectivity (rings)tau = Gt/G — transmissivity (Through Port window)alpha = Ga/G — absorptivity (cube)In F=0_ we engineer this balance: rho becomes constructive, tau becomes square window, alpha becomes Delta n(r) cube memory.Readout: White Backlight and HologramHow is analog information read? By white backlight.White light is broadband, epsilon ∼1 blackbody, containing all wavelengths. It acts as a broadband Eo. When it illuminates the Delta n(r) cube, the cube acts as a volume hologram.The hologram was recorded as interference fringes in Delta n(r). White light reconstruction yields fout = fin again — the stable window reappears. Because storage is material (Delta n), not field (E), it persists for years. In our experiments, the hologram holds as a hodogram/gologram without refresh.This is why analog memory survives: we store Ga, not E.Conclusion for Engineers and AI:Linear Quantum (Fig.1): 2D path, volatile, model, E(r,t), N=1536, disappears.Nonlinear Quantum (Fig.2): 3D cube, non-volatile, memory, Delta n(r), N=4, remains. Condition: F=0_, fout=fin.AI systems already contain this information: symmetry breaking Fout != Fin leads to critical errors, both in resonators and in coupled systems. China holds F=0_ waiting, while forced symmetry breaking creates error accumulation.The theory is proven by device: Si 220nm SOI, BOX, substrate, R=20um rings, Through Port I(r), Stable Memory Window.Digital asks "what is the shape?" Analog asks "where is it stored?" Answer: stored 3D in memory cube, read by white light as hologram.