Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Analysis of the threshold characteristics of the uniform Josephson flux shuttle

H.L. Ko

Published Jan 1, 1991• 3 citations
Publisher

Abstract

A general method for calculating the mode boundaries of a uniform flux shuttle and numerical techniques for computing these thresholds are presented. A number of examples of practical interest are given, including the current distribution in a shuttle due to a single vortex, and static margins of directly injected two-phase shift registers and magnetically clocked three-phase shift registers. Comparison with dynamic circuit simulations shows that the static thresholds are good approximations over a wide range of junction parameters.>

DOI
10.1109/77.107402

Related papers

The flux shuttle—A Josephson junction shift register employing single flux quanta

T. A. Fulton, R. C. Dynes, Philip Warren Anderson

A shift register is described which employs as information bits the flux quantum vortices occurring in Josephson junctions of extended dimensions. The positions of the vortices can be controlled and manipulated by an appropriately designed circuit geometry and by application of currents and magnetic fields. The time required for switching of the position of a vortex can approach the period of the Josephson plasma oscillation (∼10 ps) and the intrinsic energy dissipation is typically ≲ 10-18J/shift.

Proceedings of the IEEE•Jan 1, 1973•132 citations

A icrystal Jose~hson Junctions Flux Shuttle Shift Register

R. H. Koch, Theo Andreas Scherer, Mark Winter +1 more

A flux shuttle shift register with master and slave sections is i~plemented with YBCO Josephson junctions along only one straight grain boundary of a bicrystal substrate. The investigated prototype comprises a write circuit, four masterlslave shift register cells and a dynamic read out circuit for single flux quanta. The simulation results and the layout are presented.

•Jan 1, 1997•0 citations

A flux-shuttle shift register and computer architecture for superconductive digital systems

J. Fleischman

This dissertation presents the design, fabrication, and testing of a flux-shuttle shift register and a discussion of computer architecture and systems for various superconducting digital logic families. While superconductive digital logic provides very fast switching speed (a few picoseconds), it is necessary to carefully consider the application and the computer architecture being used to implement a digital system when designing for maximum performance. The first part of this dissertation addresses architecture issues. First, a brief description of superconducting digital logic fundamentals is provided. The basic concepts of various techniques used in current high-performance computing systems are then presented. Since system architecture is greatly influenced by the characteristics of the logic family used, we then describe three superconducting logic types in detail. The characteristics of each of these logic families are examined, and their influence on architecture is discussed. The system requirements of general-purpose computing and digital signal processing are investigated. Due to the demands placed on random access memory by general-purpose computing, we conclude that the most practical digital system currently realizable in superconducting technology is based on digital signal processing (DSP). Finally, three example DSP systems are explored. Part II of this dissertation concentrates on the design, fabrication, and testing of a shift register, an important part of many DSP systems. Several shift registers using different logic types are evaluated. The design and testing of a flux-shuttle shift register using direct injection clocks are presented. The circuit was experimentally verified to work with wide operating margins at low speed. While simulations indicate that the shift register will operate at more than 60 GHz, high-speed test of the shift register was limited to 1 GHz by available test equipment.

•Jan 11, 1993•1 citation

A 4 bit YBa/sub 2/Cu/sub 3/O/sub 7-δ/ bicrystal Josephson junctions flux shuttle shift register

R. Koch, Theo Andreas Scherer, M. Winter +1 more

A flux shuttle shift register with master and slave sections is implemented with YBCO Josephson junctions along only one straight grain boundary of a bicrystal substrate. The investigated prototype comprises a write circuit, four master/slave shift register cells and a dynamic read out circuit for single flux quanta. The simulation results and the layout are presented.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•6 citations

A vortex–antivortex pairs triggered Josephson shift register

Matteo Cirillo, Vittorio Merlo

We study the performances of a type of single-phase shift register based on flux-quanta dynamics. The system employs as a clock signal a spatially localized sinusoidal current injection in a discrete Josephson transmission line. This drive generates fluxon–antifluxon pairs which, traveling along the transmission line, move the single flux quanta stored in attractive potential wells. These wells are obtained by inserting inductive discontinuities in the transmission line. The simulations show that the device could operate in real Josephson systems with clock frequencies in the range 10–100 GHz. Good margins are found for the most critical parameters of operation.

Journal of Applied Physics•Oct 15, 1995•1 citation

Margins of a 16-ps/bit interferometer shift register

H. Beha, W. Jutzi, G. Mischke

Static and dynamic properties of an interferometer with five equal Josephson junctions are investigated as a single-flux quanta shift-register model. A flux quantum is stored in any loop without a bias current or magnetic field. A flux quantum is shifted from one interferometer loop to the adjacent one by applying a magnetic-field control pulse only to one in terferometer loop at a time. Shift current margins determined statically and dynamically are larger than about ±30 percent; the write current margins are ±25 percent. Within these tolerances, and for a maximum Josephson current density of 10 kA/ cm2, delays of 16 ps/bit, including shift and write, have been simulated.

IEEE Transactions on Electron Devices•Oct 1, 1980•15 citations
A general method for calculating the mode boundaries of a uniform flux shuttle and numerical techniques for computing these thresholds are presented. A number of examples of practical interest are given, including the current distribution in a shuttle due to a single vortex, and static margins of directly injected two-phase shift registers and magnetically clocked three-phase shift registers. Comparison with dynamic circuit simulations shows that the static thresholds are good approximations over a wide range of junction parameters.>
A shift register is described which employs as information bits the flux quantum vortices occurring in Josephson junctions of extended dimensions. The positions of the vortices can be controlled and manipulated by an appropriately designed circuit geometry and by application of currents and magnetic fields. The time required for switching of the position of a vortex can approach the period of the Josephson plasma oscillation (∼10 ps) and the intrinsic energy dissipation is typically ≲ 10-18J/shift.
This dissertation presents the design, fabrication, and testing of a flux-shuttle shift register and a discussion of computer architecture and systems for various superconducting digital logic families. While superconductive digital logic provides very fast switching speed (a few picoseconds), it is necessary to carefully consider the application and the computer architecture being used to implement a digital system when designing for maximum performance. The first part of this dissertation addresses architecture issues. First, a brief description of superconducting digital logic fundamentals is provided. The basic concepts of various techniques used in current high-performance computing systems are then presented. Since system architecture is greatly influenced by the characteristics of the logic family used, we then describe three superconducting logic types in detail. The characteristics of each of these logic families are examined, and their influence on architecture is discussed. The system requirements of general-purpose computing and digital signal processing are investigated. Due to the demands placed on random access memory by general-purpose computing, we conclude that the most practical digital system currently realizable in superconducting technology is based on digital signal processing (DSP). Finally, three example DSP systems are explored. Part II of this dissertation concentrates on the design, fabrication, and testing of a shift register, an important part of many DSP systems. Several shift registers using different logic types are evaluated. The design and testing of a flux-shuttle shift register using direct injection clocks are presented. The circuit was experimentally verified to work with wide operating margins at low speed. While simulations indicate that the shift register will operate at more than 60 GHz, high-speed test of the shift register was limited to 1 GHz by available test equipment.
We study the performances of a type of single-phase shift register based on flux-quanta dynamics. The system employs as a clock signal a spatially localized sinusoidal current injection in a discrete Josephson transmission line. This drive generates fluxon–antifluxon pairs which, traveling along the transmission line, move the single flux quanta stored in attractive potential wells. These wells are obtained by inserting inductive discontinuities in the transmission line. The simulations show that the device could operate in real Josephson systems with clock frequencies in the range 10–100 GHz. Good margins are found for the most critical parameters of operation.
Static and dynamic properties of an interferometer with five equal Josephson junctions are investigated as a single-flux quanta shift-register model. A flux quantum is stored in any loop without a bias current or magnetic field. A flux quantum is shifted from one interferometer loop to the adjacent one by applying a magnetic-field control pulse only to one in terferometer loop at a time. Shift current margins determined statically and dynamically are larger than about ±30 percent; the write current margins are ±25 percent. Within these tolerances, and for a maximum Josephson current density of 10 kA/ cm2, delays of 16 ps/bit, including shift and write, have been simulated.