Classical heat engines produce work by operating between a high temperature energy source and a low temperature entropy sink. The present quantum heat engine has no cooler reservoir acting as a sink of entropy but has instead an internal reservoir of negentropy which allows extraction of work from one thermal bath. The process is attended by constantly increasing entropy and does not violate the second law of thermodynamics.
Classical heat engines produce work by operating between a high temperature energy source and a low temperature entropy sink. The present quantum heat engine has no cooler reservoir acting as a sink of entropy but has instead an internal reservoir of negentropy which allows extraction of work from one thermal bath. The process is attended by constantly increasing entropy and does not violate the second law of thermodynamics.
According to the Second Law of Thermodynamics, a heat engine requires two heat baths to operate-a warm source of heat and a cooler dump for waste heat. In apparent violation of this law,
Scully
et al. propose a heat engine that uses quantum coherence to extract work from a single, warm gas. In his Perspective,
Linke
explains that the Second Law is not violated, because the power extracted from the bath is smaller than that required to achieve coherence. By combining quantum mechanics with traditional heat engines, the efficiencies of various kinds of motors could be enhanced.
Conventional heat engines convert thermal energy into mechanical work by using a working medium such as steam or gas that operates between a hot and a cold reservoir. The medium absorbs heat from the hot reservoir, produces work, then releases some heat to the cold reservoir and returns to the initial state. With the advancement of quantum technologies, researchers strive to understand whether quantum media, such as atoms, spins, superconducting circuits and semiconductor quantum dots, can be used in quantum counterparts of the classical heat engines. After a recap of the basics of classical heat engines, this review explores the theoretical foundations and advancements of quantum heat engines, focusing on the proposed two- and multilevel systems used as the working medium for the quantum Otto cycle, which is the ideal thermodynamic cycle that describes the operation of a spark-ignition internal combustion engine. The review compares the efficiency and the work extraction of these systems, discussing their performance in the high- and low-temperature limits. Alternative cycles and engines are also presented to establish the adaptability of the working media when operating under different processes and non-equilibrium conditions. In conclusion, the review offers possible applications and future developments of quantum heat engines.
We present here a quantum Carnot engine in which the atoms in the heat bath are given a small bit of quantum coherence. The induced quantum coherence becomes vanishingly small in the high-temperature limit at which we operate and the heat bath is essentially thermal. However, the phase phi, associated with the atomic coherence, provides a new control parameter that can be varied to increase the temperature of the radiation field and to extract work from a single heat bath. The deep physics behind the second law of thermodynamics is not violated; nevertheless, the quantum Carnot engine has certain features that are not possible in a classical engine.
With a class of quantum heat engines which consists of two-energy-eigenstate systems undergoing, respectively, quantum adiabatic processes and energy exchanges with heat baths at different stages of a cycle, we are able to clarify some important aspects of the second law of thermodynamics. The quantum heat engines also offer a practical way, as an alternative to Szilard's engine, to physically realize Maxwell's demon. While respecting the second law on the average, they are also capable of extracting more work from the heat baths than is otherwise possible in thermal equilibrium.
It is possible to extract work from a quantum–mechanical system whose dynamics is governed by a time–dependent cyclic Hamiltonian. An energy bath is required to operate such a quantum engine in place of the heat bath used to run a conventional classical thermodynamic heat engine. The effect of the energy bath is to maintain the expectation value of the system Hamiltonian during an isoenergetic process. It is shown that the existence of such a bath leads to equilibrium quantum states that maximize the von Neumann entropy. Quantum analogues of certain thermodynamic relations are obtained that allow one to define the temperature of the energy bath.
Squeezed thermal reservoirs have been proposed as a route to boosting the efficiency and power of quantum heat engines beyond the standard Carnot bound, since squeezing injects an effective negative entropy that can, in principle, be converted into extra work. What remains poorly quantified is the entropy-production cost that driving a working qubit against a squeezed bath actually incurs once finite-time operation and reservoir decoherence are taken into account. We simulate a quantum Otto-cycle heat engine built from a two-level working system coupled alternately to a hot reservoir at temperature 4.2 K, squeezed with squeezing parameter r ranging from 0 to 1.2, and an unsqueezed cold reservoir at 0.8 K, integrating the Lindblad master equation across 42 combinations of squeezing parameter and cycle duration between 0.05 and 2.0 (in units of the inverse qubit gap). At r = 0, mean entropy production per cycle was 0.223 k_B, consistent with standard finite-time Otto-cycle behaviour, but rose to 0.361 k_B at r = 1.2, a 62% increase, even as extractable work per cycle increased by 41%, from 0.184 to 0.259 (in units of the qubit gap). The ratio of work output to entropy production, an effective thermodynamic figure of merit, was therefore not monotonic in squeezing: it peaked at r = 0.6, where work per unit entropy produced reached 0.98, 15% above the unsqueezed value of 0.85, before declining at higher squeezing as entropy production began to outpace the marginal work gain. Power output at the maximum-power cycle duration increased with squeezing across the full range tested, from 0.31 (gap units) at r = 0 to 0.52 at r = 1.2, a 68% gain, but efficiency at maximum power fell from 0.41 to 0.33 over the same range, a trade-off traced out in detail in Table 1. A decomposition of total entropy production attributed 58-71% to hot-bath coupling across all squeezing values, with the squeezed-bath contribution alone rising from undefined at r = 0 to 34% of hot-bath entropy production at r = 1.2, while coherence generated during the unitary strokes accounted for a comparatively stable 12-18% regardless of squeezing strength. These results indicate that reservoir squeezing in quantum heat engines delivers a genuine power and work advantage but at a non-negligible and squeezing-dependent entropy cost, with an intermediate squeezing level offering the best entropy-normalized performance rather than the strongest squeezing tested, a finding directly relevant to the design of squeezed-bath quantum thermal devices operating under realistic decoherence.