The domain of vectorial bistability observable in the polarization flip of a quasi-isotropic laser is theoretically and experimentally shown to decrease when light intensity increases.
The basic mechanisms of external all-optical control of polarization bistabilities are isolated in one- and two-frequency systems. Induced rotation and induced inhibition mechanisms by vectorial injection in lasers are theoretically predicted and experimentally shown in both systems. The sensitivity of the vectorial systems leads to subfemtojoule switching energies, which correspond to the theoretical threshold values. A reduction by four orders of magnitude compared to the lowest energy demonstrated in scalar passive systems is obtained.
A quasi-isotropic CO2 laser near the resonant condition can present bistability in the polarization state, with spontaneous flips between two orthogonal linear polarization eigenmodes. In this work, we explore the role of the pump and noise on the polarization dynamics, showing a transition from stable to bistable states and the presence of coherent resonance.
The basic mechanisms of the polarization switching in vectorial bistable lasers are studied both theoretically and experimentally versus internal parameters. In particular, by scanning the frequency of a gas laser with two linearly polarized eigenstates, two quite different flipping processes with hysteresis occur according to the linear-phase-anisotropy value of the cavity. Indeed, when the anisotropy increases, rotation and inhibition mechanisms appear successively. The variations of the hysteresis loop for different anisotropy and excitation values are theoretically found to be opposed in the two processes. Additional evolutions of the polarization, such as multiple switchings in the inhibition mechanism and ``hybrid'' hysteresis loops, are predicted. The experiments, essentially performed on a monomode 3.39-\ensuremath{\mu}m $^{3}\mathrm{\ensuremath{-}}^{20}$Ne laser containing an adjustable linear phase anisotropy, confirm the existence of the two processes and their corresponding properties. These processes may also occur in other quasi-isotropic lasers versus other internal parameters, such as, for instance, the injection current in semiconductor lasers. In this case the TE and TM modes flip only in the inhibition mechanism when the bistability conditions are satisfied. The knowledge of the basic flipping mechanisms in the laser itself enables us to understand and realize the external optical-polarization control by an anisotropic feedback (one-frequency systems). Induced-rotation and induced-inhibition mechanisms are then theoretically predicted and experimentally verified. Sensitive optical gates are realized by varying the feedback phase in both processes.