Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America B

Light pulse atom interferometry at short interrogation times

David L. Butts, Joseph M. Kinast, Brian P. Timmons, Richard E. Stoner

Published Feb 10, 2011• 32 citations
Publisher

Abstract

The use of cold atoms in any sensor operating in a dynamic environment requires that the measurement cycle be conducted before the atom cloud escapes the interaction region. Under multiple-g accelerations it is desirable to complete measurements in millisecond time scales, particularly when laser beams are used to interrogate the atoms. In this paper, we demonstrate high-contrast atom interferometry in a vapor cell using stimulated Raman transitions at millisecond interrogation times. Laser-cooled cesium atoms are interrogated with a sequence of three Raman pulses and the interferometer phase is read out in the same region in which the atoms are trapped. Our system achieved over 70% contrast with a Doppler insensitive interferometer and over 30% contrast with a Doppler sensitive interferometer, in an environment normally considered adverse to high-contrast atom interferometry (e.g., no retroreflector stabilization and no magnetic shielding). Demonstration of an inertially sensitive atom interferometer in this environment supports the feasibility of a high-bandwidth inertial sensor using light pulse atom interferometry. Finally, we show that Raman pulse population transfer efficiency in our system is primarily limited by nonuniformity of the Raman laser intensity across the atom cloud.

DOI
10.1364/josab.28.000416

Related papers

Analytical framework for dynamic light pulse atom interferometry at short interrogation times

Richard E. Stoner, David L. Butts, Joseph M. Kinast +1 more

High-precision inertial sensing demonstrations with light pulse atom interferometry have typically used Raman pulses having durations orders of magnitude shorter than the dwell time between interferometer pulses. Environmentally robust sensors operating at high-bandwidth will be required to operate at short (millisecond scale) dwell times between Raman pulses. In such an operational mode, the Raman pulse duration becomes an appreciable fraction of the dwell time between pulses. In addition, high-precision inertial sensing applications have typically been demonstrated in mildly dynamic or nondynamic environments having low rate of change of inertial input, ensuring that applied Raman pulses satisfy the Raman resonance condition. Application of nonresonant pulses will be inevitable in sensors registering time-varying inertial input. We present a diagrammatic technique for calculation of atomic output state populations for multipulse atom optics manipulations that explicitly account for the effects of finite pulse duration and finite Raman detuning effects on the laser-induced atomic phase. We analyze several atom interferometer sequences. We report accelerometer and gyroscope phase evolution for fixed Raman laser frequency difference incorporating corrections in powers of the ratio of pulse duration to time interval between interferometer pulses. Our accelerometer result agrees with other published results.

Journal of the Optical Society of America B•Sep 13, 2011•29 citations

High Data-Rate Atom Interferometry for Measuring Dynamic Inertial Conditions

Akash Rakholia

Light pulse atom interferometers have demonstrated remarkable sensitivity and stability for acceleration and rotation rate measurement. However, typical manifestations are designed for laboratory environments and thus rely on a fixed magnitude and direction of gravity, and limited ambient rotation rate. We have enhanced the application space of atom interferometers towards more dynamic environments, with special attention for inertial navigation. I present our work in the domain of short time-of-flight atom interferometry, whereby the magnitude of ensemble excursion is constrained. The limited interrogation time results in a significant loss of sensitivity. We recover a fraction of the lost sensitivity by operating with an enhanced duty-cycle and data-rate. To demonstrate this concept, we construct an atom interferometer accelerometer capable of operating at data-rates as high as 300 Hz with sensitivities at μg/rtHz levels, which represents a competitive figure for inertial navigation application. For the bulk of this work, we demonstrate a dual-axis sensor capable of simultaneous acceleration and rotation-rate measurements. The sensor relies on a technique we refer to as "ensemble exchange" which provides a high flux source of ultracold atoms by swapping atomic ensembles between two MOTs. We achieve a steady-state atom number of 7e6 atoms/shot using a minimal loading time of a few milliseconds each shot. Furthermore, we find this technique to be robust under dynamic conditions as large as 10 g of acceleration and 20 rad/s of rotation rate, representing a significant enhancement in ultra-cold atom sample preparation. The sensor achieves μg/rtHz and μrad/s/rtHz sensitivities, making this technique a compelling prospect for inertial navigation applications. Through the use of auxiliary cosensors and a real-time combinatorial loop with feedforward and feedback mechanisms, we demonstrate an unprecedented enhancement of the sensor dynamic range up to 20 mg. Finally, I will discuss a novel manifestation of short time-of-flight atom interferometry in a warm atomic vapor, which avoids the complication of cold sample preparation and has the potential for significantly simplified laser systems.

•Sep 1, 2015•2 citations

Precision Rotation Sensing Using Atom Interferometry

T. L. Gustavson

A rotation-rate sensor was developed using atom interferometry and the Sagnac effect for matter waves. This device has a short-term sensitivity of 6× 10−10 rad/sec for a 1 second integration time, which is the best publicly reported value to date. It has high intrinsic accuracy because it relies on interactions between atoms and laser light that is stabilized to an atomic transition. Long-term stability is promising and characterization is currently underway. Potential applications include inertial navigation, geophysical studies, and general relativity tests such as verification of the Lense-Thirring and geodetic effects. The principle of operation is as follows: A thermal cesium atomic beam crosses three laser interaction regions where two-photon stimulated Raman transitions between cesium ground states transfer momentum to atoms and divide, deflect, and recombine the atomic wavepackets. Rotation induces a phase shift between the two possible trajectories and causes a change in the detected number of atoms with a particular internal state. Counterpropagating atomic beams form two interferometers using shared lasers for common-mode rejection, and the rotation phase shifts have opposite sign since the phase shift is proportional to the vector velocity of the atoms. Therefore, subtracting or adding the interferometer signals discriminates between rotation and transverse acceleration summed with laser arbitrary phase. Furthermore, in the inertial reference frame of the atoms, rotations Doppler-shift the Raman lasers. Adding Raman frequency shifts to cancel these Doppler-shifts allows operation at an effective zero rotation rate, improving sensitivity and bandwidth. Modulating these frequency shifts facilitates sensitive lock-in detection readout techniques.

•Jan 1, 2000•26 citations

Atom Interferometer Driven by a Picosecond Frequency Comb

Cyrille Solaro, Clément Debavelaere, Pierre Cladé +1 more

We demonstrate a light-pulse atom interferometer based on the diffraction of free-falling atoms by a picosecond frequency-comb laser. More specifically, we coherently split and recombine wave packets of cold ^{87}Rb atoms by driving stimulated Raman transitions between the |5s ^{2}S_{1/2},F=1⟩ and |5s ^{2}S_{1/2},F=2⟩ hyperfine states, using two trains of picosecond pulses in a counterpropagating geometry. We study the impact of the pulses' length as well as the interrogation time onto the contrast of the atom interferometer. Our experimental data are well reproduced by a numerical simulation based on an effective coupling that depends on the overlap between the pulses and the atomic cloud. These results pave the way for extending light-pulse interferometry to transitions in other spectral regions and therefore to other species, for new possibilities in metrology, sensing of gravito-inertial effects, and tests of fundamental physics.

arXiv:2207.12723•Physical Review Letters•Oct 21, 2022•13 citations

Interleaved atom interferometry for high sensitivity inertial measurements

Matteo Altorio, Romain Gautier, Denis Savoie +3 more

Cold-atom inertial sensors target several applications in navigation, geoscience and tests of fundamental physics. Reaching high sampling rates and high inertial sensitivities, obtained with long interrogation times, represents a challenge for these applications. We report on the interleaved operation of a cold-atom gyroscope, where 3 atomic clouds are interrogated simultaneously in an atom interferometer featuring a 3.75 Hz sampling rate and an interrogation time of 801 ms. Interleaving improves the inertial sensitivity by efficiently averaging vibration noise, and allows us to perform dynamic rotation measurements in a so-far unexplored range. We demonstrate a stability of $3\times 10^{-10}$ rad.s$^{-1}$, which competes with the best stability levels obtained with fiber-optics gyroscopes. Our work validates interleaving as a key concept for future atom-interferometry sensors probing time-varying signals, as in on-board navigation and gravity-gradiometry, searches for dark matter, or gravitational wave detection.

•Apr 8, 2019•79 citations

Interleaved Atom Interferometry for High Sensitivity Inertial Measurements

Denis Savoie, Matteo Altorio, Bess Fang +3 more

We report on interleaved operation of a cold-atom inertial sensor, where three atomic clouds are simultaneously probed in an atom interferometer featuring 4 Hz sampling rate and interrogation time of 801 ms. Interleaving improves the inertial sensitivity by efficiently averaging vibration noise and allows us to perform dynamic rotation measurements in a so far unexplored range. We demonstrate sensitivity of 30 nrad.s-1·Hz-1/2and reach the long-term stability of 3·10-10rads-1, which competes with the best stability levels obtained with fiber-optic gyroscopes. Our work validated interleaving as a key concept for future atom-interferometry sensors probing time-varying signals, as in on-board navigation and gravity gradiometry, searches for dark matter, or gravitational wave detection.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2019•15 citations
The use of cold atoms in any sensor operating in a dynamic environment requires that the measurement cycle be conducted before the atom cloud escapes the interaction region. Under multiple-g accelerations it is desirable to complete measurements in millisecond time scales, particularly when laser beams are used to interrogate the atoms. In this paper, we demonstrate high-contrast atom interferometry in a vapor cell using stimulated Raman transitions at millisecond interrogation times. Laser-cooled cesium atoms are interrogated with a sequence of three Raman pulses and the interferometer phase is read out in the same region in which the atoms are trapped. Our system achieved over 70% contrast with a Doppler insensitive interferometer and over 30% contrast with a Doppler sensitive interferometer, in an environment normally considered adverse to high-contrast atom interferometry (e.g., no retroreflector stabilization and no magnetic shielding). Demonstration of an inertially sensitive atom interferometer in this environment supports the feasibility of a high-bandwidth inertial sensor using light pulse atom interferometry. Finally, we show that Raman pulse population transfer efficiency in our system is primarily limited by nonuniformity of the Raman laser intensity across the atom cloud.
High-precision inertial sensing demonstrations with light pulse atom interferometry have typically used Raman pulses having durations orders of magnitude shorter than the dwell time between interferometer pulses. Environmentally robust sensors operating at high-bandwidth will be required to operate at short (millisecond scale) dwell times between Raman pulses. In such an operational mode, the Raman pulse duration becomes an appreciable fraction of the dwell time between pulses. In addition, high-precision inertial sensing applications have typically been demonstrated in mildly dynamic or nondynamic environments having low rate of change of inertial input, ensuring that applied Raman pulses satisfy the Raman resonance condition. Application of nonresonant pulses will be inevitable in sensors registering time-varying inertial input. We present a diagrammatic technique for calculation of atomic output state populations for multipulse atom optics manipulations that explicitly account for the effects of finite pulse duration and finite Raman detuning effects on the laser-induced atomic phase. We analyze several atom interferometer sequences. We report accelerometer and gyroscope phase evolution for fixed Raman laser frequency difference incorporating corrections in powers of the ratio of pulse duration to time interval between interferometer pulses. Our accelerometer result agrees with other published results.
Light pulse atom interferometers have demonstrated remarkable sensitivity and stability for acceleration and rotation rate measurement. However, typical manifestations are designed for laboratory environments and thus rely on a fixed magnitude and direction of gravity, and limited ambient rotation rate. We have enhanced the application space of atom interferometers towards more dynamic environments, with special attention for inertial navigation. I present our work in the domain of short time-of-flight atom interferometry, whereby the magnitude of ensemble excursion is constrained. The limited interrogation time results in a significant loss of sensitivity. We recover a fraction of the lost sensitivity by operating with an enhanced duty-cycle and data-rate. To demonstrate this concept, we construct an atom interferometer accelerometer capable of operating at data-rates as high as 300 Hz with sensitivities at μg/rtHz levels, which represents a competitive figure for inertial navigation application. For the bulk of this work, we demonstrate a dual-axis sensor capable of simultaneous acceleration and rotation-rate measurements. The sensor relies on a technique we refer to as "ensemble exchange" which provides a high flux source of ultracold atoms by swapping atomic ensembles between two MOTs. We achieve a steady-state atom number of 7e6 atoms/shot using a minimal loading time of a few milliseconds each shot. Furthermore, we find this technique to be robust under dynamic conditions as large as 10 g of acceleration and 20 rad/s of rotation rate, representing a significant enhancement in ultra-cold atom sample preparation. The sensor achieves μg/rtHz and μrad/s/rtHz sensitivities, making this technique a compelling prospect for inertial navigation applications. Through the use of auxiliary cosensors and a real-time combinatorial loop with feedforward and feedback mechanisms, we demonstrate an unprecedented enhancement of the sensor dynamic range up to 20 mg. Finally, I will discuss a novel manifestation of short time-of-flight atom interferometry in a warm atomic vapor, which avoids the complication of cold sample preparation and has the potential for significantly simplified laser systems.
A rotation-rate sensor was developed using atom interferometry and the Sagnac effect for matter waves. This device has a short-term sensitivity of 6× 10−10 rad/sec for a 1 second integration time, which is the best publicly reported value to date. It has high intrinsic accuracy because it relies on interactions between atoms and laser light that is stabilized to an atomic transition. Long-term stability is promising and characterization is currently underway. Potential applications include inertial navigation, geophysical studies, and general relativity tests such as verification of the Lense-Thirring and geodetic effects. The principle of operation is as follows: A thermal cesium atomic beam crosses three laser interaction regions where two-photon stimulated Raman transitions between cesium ground states transfer momentum to atoms and divide, deflect, and recombine the atomic wavepackets. Rotation induces a phase shift between the two possible trajectories and causes a change in the detected number of atoms with a particular internal state. Counterpropagating atomic beams form two interferometers using shared lasers for common-mode rejection, and the rotation phase shifts have opposite sign since the phase shift is proportional to the vector velocity of the atoms. Therefore, subtracting or adding the interferometer signals discriminates between rotation and transverse acceleration summed with laser arbitrary phase. Furthermore, in the inertial reference frame of the atoms, rotations Doppler-shift the Raman lasers. Adding Raman frequency shifts to cancel these Doppler-shifts allows operation at an effective zero rotation rate, improving sensitivity and bandwidth. Modulating these frequency shifts facilitates sensitive lock-in detection readout techniques.
We demonstrate a light-pulse atom interferometer based on the diffraction of free-falling atoms by a picosecond frequency-comb laser. More specifically, we coherently split and recombine wave packets of cold ^{87}Rb atoms by driving stimulated Raman transitions between the |5s ^{2}S_{1/2},F=1⟩ and |5s ^{2}S_{1/2},F=2⟩ hyperfine states, using two trains of picosecond pulses in a counterpropagating geometry. We study the impact of the pulses' length as well as the interrogation time onto the contrast of the atom interferometer. Our experimental data are well reproduced by a numerical simulation based on an effective coupling that depends on the overlap between the pulses and the atomic cloud. These results pave the way for extending light-pulse interferometry to transitions in other spectral regions and therefore to other species, for new possibilities in metrology, sensing of gravito-inertial effects, and tests of fundamental physics.
Cold-atom inertial sensors target several applications in navigation, geoscience and tests of fundamental physics. Reaching high sampling rates and high inertial sensitivities, obtained with long interrogation times, represents a challenge for these applications. We report on the interleaved operation of a cold-atom gyroscope, where 3 atomic clouds are interrogated simultaneously in an atom interferometer featuring a 3.75 Hz sampling rate and an interrogation time of 801 ms. Interleaving improves the inertial sensitivity by efficiently averaging vibration noise, and allows us to perform dynamic rotation measurements in a so-far unexplored range. We demonstrate a stability of 3×10−103\times 10^{-10}3×10−10 rad.s−1^{-1}−1, which competes with the best stability levels obtained with fiber-optics gyroscopes. Our work validates interleaving as a key concept for future atom-interferometry sensors probing time-varying signals, as in on-board navigation and gravity-gradiometry, searches for dark matter, or gravitational wave detection.
We report on interleaved operation of a cold-atom inertial sensor, where three atomic clouds are simultaneously probed in an atom interferometer featuring 4 Hz sampling rate and interrogation time of 801 ms. Interleaving improves the inertial sensitivity by efficiently averaging vibration noise and allows us to perform dynamic rotation measurements in a so far unexplored range. We demonstrate sensitivity of 30 nrad.s-1·Hz-1/2and reach the long-term stability of 3·10-10rads-1, which competes with the best stability levels obtained with fiber-optic gyroscopes. Our work validated interleaving as a key concept for future atom-interferometry sensors probing time-varying signals, as in on-board navigation and gravity gradiometry, searches for dark matter, or gravitational wave detection.