Analysis of a quantum superconducting kinetic inductance photodetector (QSKIP) structure is presented for operation in a low background environment. We project the QSKIP’s spectral response to be limited by the Cooper pair binding energy, 2Δ or about 32 μm for YBCO. The QSKIP response and sensitivity are computed from the minimum of the Hamiltonian energy functional and linearized Rothwarf–Taylor equations. Photoresponse and sensitivity expressions are computed in terms of the quasiparticle lifetime and indicate background limited infrared performance at very low photon flux levels. At low temperatures and under background limited infrared performance conditions, the photoresponse is proportional to the number of absorbed photons. Operating the QSKIP in the Meissner state and below 50% of the critical current limits the noise sources to fluctuations in the condensate population. With the noise and photoresponse equations, the QSKIP noise equivalent power is computed in terms of the characteristic lifetimes of: quasiparticle generation; quasiparticle recombination; anharmonic phonon decay; and phonon trapping. The calculated noise equivalent power for a YBCO QSKIP is about 2.5×10−15 W/√Hz at 9 K.
Analysis of a quantum superconducting kinetic inductance photodetector (QSKIP) structure is presented for operation in a low background environment. We project the QSKIP’s spectral response to be limited by the Cooper pair binding energy, 2Δ or about 32 μm for YBCO. The QSKIP response and sensitivity are computed from the minimum of the Hamiltonian energy functional and linearized Rothwarf–Taylor equations. Photoresponse and sensitivity expressions are computed in terms of the quasiparticle lifetime and indicate background limited infrared performance at very low photon flux levels. At low temperatures and under background limited infrared performance conditions, the photoresponse is proportional to the number of absorbed photons. Operating the QSKIP in the Meissner state and below 50% of the critical current limits the noise sources to fluctuations in the condensate population. With the noise and photoresponse equations, the QSKIP noise equivalent power is computed in terms of the characteristic lifetimes of: quasiparticle generation; quasiparticle recombination; anharmonic phonon decay; and phonon trapping. The calculated noise equivalent power for a YBCO QSKIP is about 2.5×10−15 W/√Hz at 9 K.
A superconducting quantum detector structure in YBCO is described with a directly coupled SQUID read out circuit. The detector geometry is optimized for maximum photoresponse with the use of a serpentine pattern. The serpentine pattern reduces quasiparticle diffusion effects and maximizes the photoinduced changes in the kinetic inductance. The operation of this sensor is analyzed in terms of geometry and quasiparticle lifetime to obtain expressions for the signal and noise of this detector. The background limited infrared performance of this detector is calculated to be about 5/spl times/10/sup -17/ NEP. The photoresponse is expected to be limited by the superconducting energy gap, about 30-40 /spl mu/m.>
While experimental studies of kinetic-inductance sensors have been limited so far by the temperature range near the superconducting transition, these detectors can be very sensitivity at temperatures well below the transition, where the number of equilibrium quasiparticles is exponentially small. In this regime, a shift of the quasiparticle chemical potential under radiation results in the change of the kinetic inductance, which can be measured by a sensitive SQUID readout. We modeled the kinetic inductance response of detectors made from disordered superconducting Nb, NbC, and MoRe films. Low phonon transparency of the interface between the superconductor and the substrate causes substantial re-trapping of phonons providing high quantum efficiency and the operating time of approximately 1 ms at 1 K. Due to the small number of quasiparticles, the noise equivalent power of the detector determined by the quasiparticle generation-recombination noise can be as small as approximately 10(exp -19) W/Hz(exp 1/2) at He4 temperatures.
While experimental studies of kinetic-inductance sensors have been limited so far by the temperature range near the superconducting transition, these detectors can be very sensitive at temperatures well below the transition, where the number of equilibrium quasiparticles is exponentially small. In this regime, a shift of the quasiparticle chemical potential under radiation results in the change of the kinetic inductance, which can be measured by a sensitive SQUID readout. We modeled the kinetic inductance response of detectors made from disordered superconducting Nb, NbC, and MoRe films. Low phonon transparency of the interface between the superconductor and the substrate causes substantial re-trapping of phonons providing high quantum efficiency and the operating time of ∼1 ms at ≈1 K. Due to the small number of quasiparticles, the noise equivalent power of the detector determined by the quasiparticle generation-recombination noise can be as small as ∼10−19 W/√Hz at He4 temperatures.
While most experimental studies of kinetic-inductance sensors have been limited so far by the temperature range near the superconducting transition, kinetic-inductance detectors can be very sensitive at temperatures well below the transition, where the number of equilibrium quasiparticles is exponentially small. In this regime, a shift of the quasiparticle chemical potential under radiation results in the change of the kinetic inductance. We modeled the noise characteristics of the kinetic-inductance detectors made from disordered superconducting Nb, NbC, and MoRe films. Low-phonon transparency of the interface between the superconductor and the substrate causes substantial retrapping of phonons providing high quantum efficiency and the operating time of ∼1 ms at ≈1 K. Due to the small number of quasiparticles, the noise equivalent power of the detector determined by the quasiparticle generation–recombination noise can be as small as ∼10−19 W/Hz at He4 temperatures.
Abstract The Cooper-pair breaking efficiency quantifies the effectiveness with which incident energy, such as that delivered by photons or phonons, is converted into quasiparticles—a process central to the response of superconducting pair-breaking detectors. We measure the pair-breaking efficiency in two far-infrared kinetic inductance detectors (KIDs) operating at 4.3 THz and 15 THz by comparing photon noise and thermal generation-recombination noise. Both KIDs are lumped-element devices consisting of a tantalum interdigitated capacitor in parallel with an aluminum inductor meandered line, which also acts as a low-volume absorber. The measured pair-breaking efficiencies are 0.42 and 0.07 for the 4.3 THz and 15 THz devices, respectively. The extremely low efficiency at 15 THz, a frequency well above the aluminum Debye frequency, is mainly attributed to rapid anharmonic decay of phonons, with additional phonon relaxation in the tantalum layer further reducing the available phonon population for pair-breaking. Furthermore, a relationship between the pair-breaking efficiency and detector resolving power is derived.
Microwave Kinetic Inductance Detectors (MKIDs) are extremely sensitive radiation detectors based on superconducting resonators that can be combined in large arrays on a single readout line within a limited frequency bandwidth. This makes MKIDs ideal detectors for the ultimate far-infrared observatory: a future space-based actively cooled telescope with its performance solely limited by the low universe background radiation. However, to reach these detector requirements, state-of-the-art MKIDs still need a order of magnitude improvement in device sensitivity. In this work, the MKID sensitivity is improved by reducing the aluminium volume that absorbs pair-breaking radiation into quasiparticle excitations, while making sure all radiation is still absorbed. Furthermore, a key requirement is sufficient reduction of excess noise as to keep the device intrinsically limited by thermally driven random fluctuations in the number of quasiparticles in absence of radiation, or Generation-Recombination (G-R) noise. To this end, a model is developed that describes the noise contributions as function of device geometry, readout power, material properties and radiation power. Subsequently, a realistic MKID design is presented and tested that reduces excess noise and maximises the sensitivity, expressed as Noise Equivalent Power (NEP). At high temperatures, good overall agreement is found between the measured noise spectra and the model. At low temperature T = 120 mK, the measurement results give an optical NEP similar to current state-of-the-art MKIDs. The NEP is not as low as expected due to short quasiparticle lifetimes, an unexpected decrease in the G-R noise level and a very high excess noise attributed to Two-Level Systems (TLS) noise that starts to dominate the already low G-R noise spectrum at low temperatures. Possibly, the quick quasiparticle lifetime saturation and noise level drop are caused by a strong readout power effect, as the readout power is known to create excess quasiparticles and to cause a strongly non-thermal electron energy distribution in the aluminium strip of the MKID. However, the exact microscopic details of these effects are unknown and not studied in this project. Based on the current chip design, a straightforward way to improve device performance and study the readout power effect in more detail is a reduction of the high TLS noise levels, which is possibly fabrication related. This would allow an unobstructed view of the G-R noise spectrum at low temperatures, thereby allowing both a study of the readout power effect on the quasiparticle system, and ultimately achieving the improvement in NEP needed reach the detector requirements for the ultimate space-based far-infrared observatory.