Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Model-independent measurement of the excited fraction in a magneto-optical trap

M. H. Shah, H. A. Camp, M. L. Trachy, G. Veshapidze, M. A. Gearba, Brett D DePaola

Published May 31, 2007• 35 citations
Publisher

Abstract

In many experiments involving a magneto-optical trap (MOT) it is of great importance to know the fraction of atoms placed in an excited state due to the trapping process. Generally speaking, researchers have had to use overly simplistic and untested models to estimate this fraction. In this work, the excited fractions of $^{87}\mathrm{Rb}$ atoms in a MOT are directly measured using a charge transfer technique, for a range of MOT parameters. Simple models are then fit to the measured fractions. Using the results of this work, the excited fraction of $^{87}\mathrm{Rb}$ atoms trapped in a MOT can be accurately estimated with knowledge of only the trapping laser intensity and detuning. The results are, at most, only weakly dependent on other MOT parameters.

DOI
10.1103/physreva.75.053418

Related papers

Model-free measurement of the excited-state fraction in a Rb85 magneto-optical trap

G. Veshapidze, J. Bang, C. W. Fehrenbach +2 more

In many experiments involving magneto-optical traps (MOTs), it is imperative to know the fraction of atoms left in an excited state by the cooling and trapping lasers. In most cases, researchers have used formulas that were derived for simple two-level systems interacting with a single beam of light having a well-defined polarization, and in the absence of magnetic or electric fields. However, a MOT environment is much more complex than this. Here we directly measure the excited fraction in a MOT of $^{85}\mathrm{Rb}$ atoms in a model-independent manner for a wide range of trapping conditions. We then fit our measured fractions to an ansatz based on a simple model. Knowing only the trapping laser's total intensity and detuning from resonance, one can then use this ansatz to accurately predict the excited fraction. The work is a companion piece to similar measurements on a MOT of $^{87}\mathrm{Rb}$.

Physical Review A•May 27, 2015•10 citations

Model-Free Measurement of the Excited-State Fraction in a $^{85}$Rb Magneto-Optical Trap

Hai Truong Nguyen, Goga Veshapedze, Chris Verzani +3 more

In many experiments involving magneto-optical traps (MOTs), it is imperative to know the fraction of atoms left in an excited state by the cooling and trapping lasers. In most cases, researchers have used formulas that were derived for simple 2-level systems interacting with a single beam of light having a well-defined polarization, and in the absence of magnetic or electric fields. However a MOT environment is much more complex than this. Here we directly measure the excited fraction in a MOT of 85Rb atoms in a model-independent manner for a wide range of trapping conditions. We then fit our measured fractions to an ansatz based on a simple model. Knowing only the trapping laser's total intensity and detuning from resonance, one can then use this ansatz to accurately predict the excited fraction. The work is a companion piece to similar measurements on a MOT of 87Rb.

Bulletin of the American Physical Society•Jun 4, 2014•2 citations

Determination of the atom’s excited-state fraction in a magneto-optical trap

Yue Guo Shen

This thesis introduces an empirical method for determining and controlling the excited-state fraction of atoms in a magneto-optical trap (MOT), which is essential for the use of cold atoms as a sensor when they are held in a MOT since their interactions with other particles and fields are quantum state dependent. A four-level theoretical atomic model was used to describe the transitions of the atoms in a MOT, and the fluorescence emitted from a fixed number of atoms under different laser conditions were measured to determine the saturation parameters empirically. Two saturation parameters P_sat= 1.15 (0.06) mW and P_r,sat= 2.05 (0.59) mW were successfully extracted from the model, and the excited-state fraction in the four-level model was accurately calculated as a function of the MOT trap parameters, which ranges from 0.045 to 0.415 for the experimental settings currently available. We also observed minor deviations from the four-level model for the photon scattering rate, and a hypothesis of atom pinning under high powers was proposed to explain the problem. We plan to use this simple excited-state fraction determination method to distinguish the ground and excited state collision cross section of Rubidium atoms with species in residual gas of the vacuum. This is the first step to establishing atom loss rates from a MOT as an atomic primary pressure standard.

•Jan 1, 2018•0 citations

Model-independent measurements of the sodium magneto-optical trap's excited-state population

Jonathan M. Kwolek, D. S. Goodman, Samuel Entner +3 more

We present model-independent measurements of the excited-state population of atoms in a sodium (Na) magneto-optical trap (MOT) using a hybrid ion-neutral trap composed of a MOT and a linear Paul trap (LPT). We photoionize excited Na atoms trapped in the MOT and use two independent methods to measure the resulting ions: directly by trapping them in our LPT, and indirectly by monitoring changes in MOT fluorescence. By measuring the ionization rate via these two independent methods, we have enough information to directly determine the population of MOT atoms in the excited state. The resulting measurement reveals that there is a range of trapping-laser intensities where the excited-state population of atoms in our MOT follows the standard two-level model intensity dependence. However, an experimentally determined effective saturation intensity must be used instead of the theoretically predicted value from the two-level model. We measured the effective saturation intensity to be ${I}_{\mathrm{SE}}=22.9\ifmmode\pm\else\textpm\fi{}5.1\phantom{\rule{0.222222em}{0ex}}\mathrm{mW}/{\mathrm{cm}}^{2}$ for the type-I Na MOT and ${I}_{\mathrm{SE}}=49\ifmmode\pm\else\textpm\fi{}11\phantom{\rule{0.28em}{0ex}}\mathrm{mW}/{\mathrm{cm}}^{2}$ for the type-II Na MOT, approximately 1.7 and 3.6 times the theoretical estimate, respectively. Lastly, at large trapping-laser intensities, our experiment reveals a clear departure from the two-level model at a critical intensity that we believe is due to a state-mixing effect, the critical intensity of which can be determined by a simple power broadening model.

arXiv:1802.05306•Physical Review A•May 31, 2018•11 citations

Photon-scattering-rate measurement of atoms in a magneto-optical trap

Kais Jooya, Nam Musterer, Kirk W. Madison +1 more

We present a technique for empirically determining the photon scattering rate of atoms in a magneto-optical trap (MOT). An accurate measurement of the scattering rate provides a way to accurately determine the number of atoms in the MOT, the excited-state fraction, and the in situ light intensity experienced by the atoms in the trap. We validate this technique for determining the scattering rate by comparing the atom number determined by the fluorescence emitted by atoms in a MOT with an independent and unrelated measure of the number determined by an absorption measurement of an optical pumping beam. We also observe minor deviations from the two-level model for the single-photon scattering rate and extend our analysis to a four-level model. The main advantage of the method described here is that it provides a simple way of determining the photon scattering rate of the MOT empirically and, thus, of evaluating the atom number from fluorescence measurements more accurately.

Physical Review A•Dec 2, 2013•9 citations

An Asymmetric Magneto-Optical Trap

Heung‐Ryoul Noh, Wonho Jhe

In this article we have presented experimental and theoretical works on the asymmetric magneto-optical trap. In Sec. 2, we have studied parametric resonance in a magneto-optical trap. We have described a theoretical aspect of parametric resonance by the analytic and numerical methods. We also have measured the amplitude and phase of the limit cycle motions by changing the modulation frequency or the amplitude. We find that the results are in good agreement with the calculation results, which are based on simple Doppler cooling theory. In the final subsection we described direct observation of the sub-Doppler part of the MOT without the Doppler part by using the parametric resonance which. We compared the spatial profile of sub-Doppler trap with the Monte-Carlo simulation, and observed they are in good agreements. In Sec. 3, we have presented two methods to measure the trap frequency: one is using parametric resonance and the other transient oscillation method. In the case of parametric resonance method, we could measure the trap frequency accurately by decreasing the modulation amplitude of the parametric excitation down to its threshold value. While only the trap frequency were able to be obtained by the parametric resonance method, we could obtain both the trap frequency and the damping coefficient by the transient oscillation method. We have made a quantitative study of the Doppler cooling theory in the MOT by measuring the trap parameters. We have found that the simple rate-equation model can accurately describe the experimental data of trap frequencies. In Sec. 4, we have demonstrated the adjustable multiple traps in the MOT. When the laser detunings are different, the usual sub-Doppler force and the corresponding damping coefficient at the MOT center is greatly suppressed, whereas the novel sub-Doppler traps are generated and exist within a finite range of detuning differences. We have found that and ±atomic transitions excited by the transverse lasers in the longitudinal direction are responsible for the strong side and the weak middle sub-Doppler traps, respectively. The adjustable array of sub-Doppler traps may be useful for controllable atom-interferometertype experiments in atom optics or quantum optics. The AMOT described in this article can be used for study of nonlinear dynamics using cold atoms such as critical phenomena far from equilibrium (Kim et al., 2006) or a nonlinear Duffing oscillation (Nayfeh & Moore, 1979; Strogatz, 2001).

InTech eBooks•Jan 1, 2010•0 citations
In many experiments involving a magneto-optical trap (MOT) it is of great importance to know the fraction of atoms placed in an excited state due to the trapping process. Generally speaking, researchers have had to use overly simplistic and untested models to estimate this fraction. In this work, the excited fractions of 87Rb^{87}\mathrm{Rb}87Rb atoms in a MOT are directly measured using a charge transfer technique, for a range of MOT parameters. Simple models are then fit to the measured fractions. Using the results of this work, the excited fraction of 87Rb^{87}\mathrm{Rb}87Rb atoms trapped in a MOT can be accurately estimated with knowledge of only the trapping laser intensity and detuning. The results are, at most, only weakly dependent on other MOT parameters.
In many experiments involving magneto-optical traps (MOTs), it is imperative to know the fraction of atoms left in an excited state by the cooling and trapping lasers. In most cases, researchers have used formulas that were derived for simple two-level systems interacting with a single beam of light having a well-defined polarization, and in the absence of magnetic or electric fields. However, a MOT environment is much more complex than this. Here we directly measure the excited fraction in a MOT of 85Rb^{85}\mathrm{Rb}85Rb atoms in a model-independent manner for a wide range of trapping conditions. We then fit our measured fractions to an ansatz based on a simple model. Knowing only the trapping laser's total intensity and detuning from resonance, one can then use this ansatz to accurately predict the excited fraction. The work is a companion piece to similar measurements on a MOT of 87Rb^{87}\mathrm{Rb}87Rb.
Model-Free Measurement of the Excited-State Fraction in a 85^{85}85Rb Magneto-Optical Trap
In many experiments involving magneto-optical traps (MOTs), it is imperative to know the fraction of atoms left in an excited state by the cooling and trapping lasers. In most cases, researchers have used formulas that were derived for simple 2-level systems interacting with a single beam of light having a well-defined polarization, and in the absence of magnetic or electric fields. However a MOT environment is much more complex than this. Here we directly measure the excited fraction in a MOT of 85Rb atoms in a model-independent manner for a wide range of trapping conditions. We then fit our measured fractions to an ansatz based on a simple model. Knowing only the trapping laser's total intensity and detuning from resonance, one can then use this ansatz to accurately predict the excited fraction. The work is a companion piece to similar measurements on a MOT of 87Rb.
This thesis introduces an empirical method for determining and controlling the excited-state fraction of atoms in a magneto-optical trap (MOT), which is essential for the use of cold atoms as a sensor when they are held in a MOT since their interactions with other particles and fields are quantum state dependent. A four-level theoretical atomic model was used to describe the transitions of the atoms in a MOT, and the fluorescence emitted from a fixed number of atoms under different laser conditions were measured to determine the saturation parameters empirically. Two saturation parameters P_sat= 1.15 (0.06) mW and P_r,sat= 2.05 (0.59) mW were successfully extracted from the model, and the excited-state fraction in the four-level model was accurately calculated as a function of the MOT trap parameters, which ranges from 0.045 to 0.415 for the experimental settings currently available. We also observed minor deviations from the four-level model for the photon scattering rate, and a hypothesis of atom pinning under high powers was proposed to explain the problem. We plan to use this simple excited-state fraction determination method to distinguish the ground and excited state collision cross section of Rubidium atoms with species in residual gas of the vacuum. This is the first step to establishing atom loss rates from a MOT as an atomic primary pressure standard.
We present model-independent measurements of the excited-state population of atoms in a sodium (Na) magneto-optical trap (MOT) using a hybrid ion-neutral trap composed of a MOT and a linear Paul trap (LPT). We photoionize excited Na atoms trapped in the MOT and use two independent methods to measure the resulting ions: directly by trapping them in our LPT, and indirectly by monitoring changes in MOT fluorescence. By measuring the ionization rate via these two independent methods, we have enough information to directly determine the population of MOT atoms in the excited state. The resulting measurement reveals that there is a range of trapping-laser intensities where the excited-state population of atoms in our MOT follows the standard two-level model intensity dependence. However, an experimentally determined effective saturation intensity must be used instead of the theoretically predicted value from the two-level model. We measured the effective saturation intensity to be ${I}_{\mathrm{SE}}=22.9\ifmmode\pm\else\textpm\fi{}5.1\phantom{\rule{0.222222em}{0ex}}\mathrm{mW}/{\mathrm{cm}}^{2}$ for the type-I Na MOT and ${I}_{\mathrm{SE}}=49\ifmmode\pm\else\textpm\fi{}11\phantom{\rule{0.28em}{0ex}}\mathrm{mW}/{\mathrm{cm}}^{2}$ for the type-II Na MOT, approximately 1.7 and 3.6 times the theoretical estimate, respectively. Lastly, at large trapping-laser intensities, our experiment reveals a clear departure from the two-level model at a critical intensity that we believe is due to a state-mixing effect, the critical intensity of which can be determined by a simple power broadening model.
We present a technique for empirically determining the photon scattering rate of atoms in a magneto-optical trap (MOT). An accurate measurement of the scattering rate provides a way to accurately determine the number of atoms in the MOT, the excited-state fraction, and the in situ light intensity experienced by the atoms in the trap. We validate this technique for determining the scattering rate by comparing the atom number determined by the fluorescence emitted by atoms in a MOT with an independent and unrelated measure of the number determined by an absorption measurement of an optical pumping beam. We also observe minor deviations from the two-level model for the single-photon scattering rate and extend our analysis to a four-level model. The main advantage of the method described here is that it provides a simple way of determining the photon scattering rate of the MOT empirically and, thus, of evaluating the atom number from fluorescence measurements more accurately.
In this article we have presented experimental and theoretical works on the asymmetric magneto-optical trap. In Sec. 2, we have studied parametric resonance in a magneto-optical trap. We have described a theoretical aspect of parametric resonance by the analytic and numerical methods. We also have measured the amplitude and phase of the limit cycle motions by changing the modulation frequency or the amplitude. We find that the results are in good agreement with the calculation results, which are based on simple Doppler cooling theory. In the final subsection we described direct observation of the sub-Doppler part of the MOT without the Doppler part by using the parametric resonance which. We compared the spatial profile of sub-Doppler trap with the Monte-Carlo simulation, and observed they are in good agreements. In Sec. 3, we have presented two methods to measure the trap frequency: one is using parametric resonance and the other transient oscillation method. In the case of parametric resonance method, we could measure the trap frequency accurately by decreasing the modulation amplitude of the parametric excitation down to its threshold value. While only the trap frequency were able to be obtained by the parametric resonance method, we could obtain both the trap frequency and the damping coefficient by the transient oscillation method. We have made a quantitative study of the Doppler cooling theory in the MOT by measuring the trap parameters. We have found that the simple rate-equation model can accurately describe the experimental data of trap frequencies. In Sec. 4, we have demonstrated the adjustable multiple traps in the MOT. When the laser detunings are different, the usual sub-Doppler force and the corresponding damping coefficient at the MOT center is greatly suppressed, whereas the novel sub-Doppler traps are generated and exist within a finite range of detuning differences. We have found that and ±atomic transitions excited by the transverse lasers in the longitudinal direction are responsible for the strong side and the weak middle sub-Doppler traps, respectively. The adjustable array of sub-Doppler traps may be useful for controllable atom-interferometertype experiments in atom optics or quantum optics. The AMOT described in this article can be used for study of nonlinear dynamics using cold atoms such as critical phenomena far from equilibrium (Kim et al., 2006) or a nonlinear Duffing oscillation (Nayfeh & Moore, 1979; Strogatz, 2001).