Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Realization of a phase-coherent optical fiber link for the comparison of remote atomic clocks

Cecilia Clivati

Published Jan 1, 2014• 0 citations
OpenAlex

Abstract

This thesis describes the realization of a facility for the high-accuracy frequency dissemination on a continental scale. This project was developed at the Optics division of the Italian National Metrology Institute (INRIM), which is in charge of the realization and operation of the atomic primary frequency standards, of their dissemination, and cooperates to the International Atomic Time generation. Frequency dissemination is now based on satellite techniques; however, the resolution provided by these methods does not cope with the accuracy and stability of newgeneration frequency standards. For instance, more than 10 days of measurement are needed to effectively compare primary standards, and years would be necessary to compare optical clocks via satellite links. On the other hand, it has been demonstrated that systems based on optical fibers can improve the resolution by about 5 orders of magnitude with respect to satellite techniques. This is the reason why many national metrology institutes in Europe are cooperating to develop a network for frequency dissemination and clocks comparisons all across the continent. This technique is based on the transmission of a narrow-linewidth laser along a standard telecom fiber. At the metrological laboratory, the frequency is measured with respect to a frequency standard, while at the remote link end it is extracted and used as a frequency reference. However, temperature changes, acoustic noise, air flows can degrade the stability of the delivered frequency, and must therefore be compensated. This is done through a Doppler cancellation technique, in which the light travels twice in the optical fiber in opposite directions. This is different from what happens in telecom links, which are inherently bidirectional. Dedicated instruments have therefore been developed. This thesis describes the realization of a phase-stabilized optical link between INRIM and the European Laboratory for Non Linear Spectroscopy in Florence, where an optical clock based on Sr atoms was under development at the time of measurements. This clock has been compared to the INRIM primary standard via the optical link. I worked on the realization of the ultrastable laser sources, on the development and characterization of the optical and electronics apparatus, and at the development of the metrological chain for the remote clocks comparison. This thesis also describes some novel techniques which we investigated in the framework of this project, and new applications of optical fiber links. During my studies I spent two months at the Laboratoire National d'Essais-Systemes de Référence Temps-Espace (LNE-SYRTE) in Paris, where I cooperated to the realization of an ultrastable laser source based on an optical delay line. This is reported in the thesis as well

Related papers

Optical fiber link for ultra-stable frequency dissemination and atomic clock comparisons

Anne Amy‐Klein, Nicolas Quintin, N. Chiodo +42 more

The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].

•Jan 1, 2017•0 citations

Confronti remoti di frequenze campione tramite link in fibra ottica.

Cecilia Clivati, Davide Calonico, Filippo Levi +3 more

We describe LinkO, an experimental set up at the Italian National Metrology (INRiM), Torino, in cooperation with the Politecnico di Torino with the aim to perform the frequency dissemination on optical fibers of ultrastable frequency signals at a European scale. this system allows the frequency comparisons of optical clocks at the relative level of some parts in 10^15 with a 1s integration time, overcoming the capabilities of the satellite based techniques. Up to now the relative stability of the optical link is at the level of 2x10^-15 on a protorype system based on 50km fiber spools inside the lab

•Jan 1, 2011•0 citations

Polarization-Insensitive Coherent Receiving in Optical Fiber Links for Frequency Metrology

Stefano Paracchino, Cecilia Clivati, Paolo Savio +3 more

In recent years, the dissemination of optical frequency signals along phase-stabilized fibers has allowed the comparison of optical clocks at unprecedented levels of accuracy. This has a strong relevance in frequency metrology and boosted the measurement capabilities also in other research fields such as radioastronomy [1], geodesy [2] and fundamental physics [3]. Fiber-based frequency dissemination relies on the transmission of a continuous-wave, narrow-linewidth laser whose frequency is accurately measured with an atomic clock at the National Metrology Institute (NMI) where it is generated. Specific techniques are used to compensate for the acoustic and seismic noise and temperature variations, which degrade the phase stability of the transmitted signal. However, in existing implementations, it is not possible to detect and compensate for the birefringence variations of the optical fiber. These can induce variations in the state of polarization (SOP) of the transmitted signal, affecting the optical beatnotes at the receiving end. This not only degrades the achievable performances in terms of phase stability of the metrological signal, but can also lead to beatnote fading, with consequent failure of the entire system. This problem currently represents one of the strongest limitations to the reliability of fiber-based frequency dissemination.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2019•0 citations

Coherent Optical-Fiber Link Across Italy and France

Cecilia Clivati, Marco Pizzocaro, Elio K. Bertacco +22 more

The dissemination of atomic clocks with fiber-based techniques finds application in the fields of metrology, fundamental physics, navigation, and spectroscopy but is a challenge in terms of reliability, maintenance, and performance. Here, we describe the realization of a 1023-km-long fiber link between the metrological institutes of Italy and France that shares the infrastructure with the Internet traffic and exploits segmentation in shorter, cascaded spans to fight optical losses exceeding 280 dB. With four months of quasicontinuous operation of this link, we compared the $\mathrm{Cs}$, $\mathrm{Rb}$, and $\mathrm{Yb}$ atomic clocks at our laboratories, highlighting the potential of this tool to assess the clock uncertainty budgets, characterize advanced satellite techniques, and develop optical timescales. The integration of the metrological, fiber-based infrastructures in the two countries, connecting photonics and spectroscopy laboratories as well as telescope facilities, provides the research community with a physical layer over which applications can be built on.

Physical Review Applied•Nov 3, 2022•39 citations

Development of ultra-stable laser sources and long-distance optical link via telecommunication networks

Haifeng Jiang

The transfer of ultra-stable frequencies between distant laboratories is required by many applications in time and frequency metrology, fundamental physics, particle accelerators and astrophysics. This thesis describes the development of ultra-stable optical links over distances from 86 km to 300 km. The long-term objective is to connect the main European National Metrology Institutes with optical links extending up to 1000 km. The optical link is based on the transfer of the optical phase of an ultra-stable laser emitting light of wavelength 1542 nm through an optical fiber of the telecommunication network. For that purpose, ultra-stable cavity-stabilized lasers and fiber-stabilized lasers have been developed. The fractional instability of cavity-stabilized laser is approximately 10-15 at 1s integration time. The fiber-stabilized lasers are robust, compact, simple, tunable and their frequency noise is comparable to that of the cavity-stabilized laser for Fourier frequencies higher than a few tens of Hertz. Optical links were first demonstrated on 86 km and 172 km using dedicated fibers connecting the laboratories LNE-SYRTE and LPL. Fractional frequency instability in the range of or below 10-19 at 104 s integration time has been obtained. For larger distances, the ultra-stable laser signal is transferred on the Internet network simultaneously with the data traffic but on a dedicated frequency channel, using wavelength division multiplexing. Multiplexed links were demonstrated over distances up to 300 km, with fractional frequency instabilities at the same level or better than with dedicated fibers.

•Oct 26, 2010•10 citations

Progress on the REFIMEVE+ project for optical frequency standard dissemination

Etienne Cantin, Nicolas Quintin, Fabrice Wiotte +6 more

High-resolution time and frequency transfer between remote laboratories are of major interest for many fundamentals applications, such as tests of general relativity or temporal variation of fundamental constants performed by comparing clocks signals. We report on the progress of a metrological fiber network on the French territory, with extensions to Europe, which aims to provide an ultra-stable frequency signal to around 20 laboratories. This network is based on the dissemination of an ultra-stable signal using optical links through the academic fiber internet network. As a first step, we have demonstrated robust links of up to 1480 km with stability at 104s and accuracy below 10−19.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 1, 2017•10 citations
This thesis describes the realization of a facility for the high-accuracy frequency dissemination on a continental scale. This project was developed at the Optics division of the Italian National Metrology Institute (INRIM), which is in charge of the realization and operation of the atomic primary frequency standards, of their dissemination, and cooperates to the International Atomic Time generation. Frequency dissemination is now based on satellite techniques; however, the resolution provided by these methods does not cope with the accuracy and stability of newgeneration frequency standards. For instance, more than 10 days of measurement are needed to effectively compare primary standards, and years would be necessary to compare optical clocks via satellite links. On the other hand, it has been demonstrated that systems based on optical fibers can improve the resolution by about 5 orders of magnitude with respect to satellite techniques. This is the reason why many national metrology institutes in Europe are cooperating to develop a network for frequency dissemination and clocks comparisons all across the continent. This technique is based on the transmission of a narrow-linewidth laser along a standard telecom fiber. At the metrological laboratory, the frequency is measured with respect to a frequency standard, while at the remote link end it is extracted and used as a frequency reference. However, temperature changes, acoustic noise, air flows can degrade the stability of the delivered frequency, and must therefore be compensated. This is done through a Doppler cancellation technique, in which the light travels twice in the optical fiber in opposite directions. This is different from what happens in telecom links, which are inherently bidirectional. Dedicated instruments have therefore been developed. This thesis describes the realization of a phase-stabilized optical link between INRIM and the European Laboratory for Non Linear Spectroscopy in Florence, where an optical clock based on Sr atoms was under development at the time of measurements. This clock has been compared to the INRIM primary standard via the optical link. I worked on the realization of the ultrastable laser sources, on the development and characterization of the optical and electronics apparatus, and at the development of the metrological chain for the remote clocks comparison. This thesis also describes some novel techniques which we investigated in the framework of this project, and new applications of optical fiber links. During my studies I spent two months at the Laboratoire National d'Essais-Systemes de Référence Temps-Espace (LNE-SYRTE) in Paris, where I cooperated to the realization of an ultrastable laser source based on an optical delay line. This is reported in the thesis as well
The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].
We describe LinkO, an experimental set up at the Italian National Metrology (INRiM), Torino, in cooperation with the Politecnico di Torino with the aim to perform the frequency dissemination on optical fibers of ultrastable frequency signals at a European scale. this system allows the frequency comparisons of optical clocks at the relative level of some parts in 10^15 with a 1s integration time, overcoming the capabilities of the satellite based techniques. Up to now the relative stability of the optical link is at the level of 2x10^-15 on a protorype system based on 50km fiber spools inside the lab
In recent years, the dissemination of optical frequency signals along phase-stabilized fibers has allowed the comparison of optical clocks at unprecedented levels of accuracy. This has a strong relevance in frequency metrology and boosted the measurement capabilities also in other research fields such as radioastronomy [1], geodesy [2] and fundamental physics [3]. Fiber-based frequency dissemination relies on the transmission of a continuous-wave, narrow-linewidth laser whose frequency is accurately measured with an atomic clock at the National Metrology Institute (NMI) where it is generated. Specific techniques are used to compensate for the acoustic and seismic noise and temperature variations, which degrade the phase stability of the transmitted signal. However, in existing implementations, it is not possible to detect and compensate for the birefringence variations of the optical fiber. These can induce variations in the state of polarization (SOP) of the transmitted signal, affecting the optical beatnotes at the receiving end. This not only degrades the achievable performances in terms of phase stability of the metrological signal, but can also lead to beatnote fading, with consequent failure of the entire system. This problem currently represents one of the strongest limitations to the reliability of fiber-based frequency dissemination.
The dissemination of atomic clocks with fiber-based techniques finds application in the fields of metrology, fundamental physics, navigation, and spectroscopy but is a challenge in terms of reliability, maintenance, and performance. Here, we describe the realization of a 1023-km-long fiber link between the metrological institutes of Italy and France that shares the infrastructure with the Internet traffic and exploits segmentation in shorter, cascaded spans to fight optical losses exceeding 280 dB. With four months of quasicontinuous operation of this link, we compared the Cs\mathrm{Cs}Cs, Rb\mathrm{Rb}Rb, and Yb\mathrm{Yb}Yb atomic clocks at our laboratories, highlighting the potential of this tool to assess the clock uncertainty budgets, characterize advanced satellite techniques, and develop optical timescales. The integration of the metrological, fiber-based infrastructures in the two countries, connecting photonics and spectroscopy laboratories as well as telescope facilities, provides the research community with a physical layer over which applications can be built on.
The transfer of ultra-stable frequencies between distant laboratories is required by many applications in time and frequency metrology, fundamental physics, particle accelerators and astrophysics. This thesis describes the development of ultra-stable optical links over distances from 86 km to 300 km. The long-term objective is to connect the main European National Metrology Institutes with optical links extending up to 1000 km. The optical link is based on the transfer of the optical phase of an ultra-stable laser emitting light of wavelength 1542 nm through an optical fiber of the telecommunication network. For that purpose, ultra-stable cavity-stabilized lasers and fiber-stabilized lasers have been developed. The fractional instability of cavity-stabilized laser is approximately 10-15 at 1s integration time. The fiber-stabilized lasers are robust, compact, simple, tunable and their frequency noise is comparable to that of the cavity-stabilized laser for Fourier frequencies higher than a few tens of Hertz. Optical links were first demonstrated on 86 km and 172 km using dedicated fibers connecting the laboratories LNE-SYRTE and LPL. Fractional frequency instability in the range of or below 10-19 at 104 s integration time has been obtained. For larger distances, the ultra-stable laser signal is transferred on the Internet network simultaneously with the data traffic but on a dedicated frequency channel, using wavelength division multiplexing. Multiplexed links were demonstrated over distances up to 300 km, with fractional frequency instabilities at the same level or better than with dedicated fibers.
High-resolution time and frequency transfer between remote laboratories are of major interest for many fundamentals applications, such as tests of general relativity or temporal variation of fundamental constants performed by comparing clocks signals. We report on the progress of a metrological fiber network on the French territory, with extensions to Europe, which aims to provide an ultra-stable frequency signal to around 20 laboratories. This network is based on the dissemination of an ultra-stable signal using optical links through the academic fiber internet network. As a first step, we have demonstrated robust links of up to 1480 km with stability at 104s and accuracy below 10−19.