Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Time-of-flight characterization of pulsed supersonic helium free-jet expansions

Bruce D. Kay, T. D. Raymond, Jane K. Rice

Published Sep 1, 1986• 20 citations
Publisher

Abstract

A synchronous time-of-flight (TOF) technique is employed to make velocity distribution measurements in pulsed supersonic free-jet expansions. For helium expansions, the flow attains a steady–state condition with a terminal Mach number of 80, on a 50-μs time scale. The transient behavior is primarily due to the mechanical action of the valve. For a 650-μs-wide pulse, greater than 95% of the atoms issuing from the pulsed nozzle can be described by the steady-state parameters. However, the velocity dispersion increases at both the leading and trailing edges of the pulse. This dispersion can be quantitatively described by incorporating a time-dependent Mach number into the standard steady-state flux velocity distribution function.

DOI
10.1063/1.1138695

Related papers

Stationary flow conditions in pulsed supersonic beams

Wolfgang Christen

We describe a generally applicable method for the experimental determination of stationary flow conditions in pulsed supersonic beams, utilizing time-resolved electron induced fluorescence measurements of high pressure jet expansions of helium. The detection of ultraviolet photons from electronically excited helium emitted very close to the nozzle exit images the valve opening behavior-with the decided advantage that a photon signal is not affected by beam-skimmer and beam-residual gas interactions; it thus allows to conclusively determine those operation parameters of a pulsed valve that yield complete opening. The studies reveal that a "flat-top" signal, indicating constant density and commonly considered as experimental criterion for continuous flow, is insufficient. Moreover, translational temperature and mean terminal flow velocity turn out to be significantly more sensitive in testing for the equivalent behavior of a continuous nozzle source. Based on the widely distributed Even-Lavie valve we demonstrate that, in principle, it is possible to achieve quasi-continuous flow conditions even with fast-acting valves; however, the two prerequisites are a minimum pulse duration that is much longer than standard practice and previous estimates, and a suitable tagging of the appropriate beam segment.

The Journal of Chemical Physics•Oct 17, 2013•13 citations

Facile time-of-flight methods for characterizing pulsed superfluid helium droplet beams

Yunteng He, Jie Zhang, Yang Li +2 more

We present two facile time-of-flight (TOF) methods of detecting superfluid helium droplets and droplets with neutral dopants. Without an electron gun and with only a heated filament and pulsed electrodes, the electron impact ionization TOF mass spectrometer can resolve ionized helium clusters such as He2(+) and He4(+), which are signatures of superfluid helium droplets. Without ionizing any helium atoms, multiphoton non-resonant laser ionization of CCl4 doped in superfluid helium droplets at 266 nm generates complex cluster ions of dopant fragments with helium atoms, including (He)(n)C(+), (He)(n)Cl(+), and (He)(n)CCl(+). Using both methods, we have characterized our cryogenic pulsed valve—the Even-Lavie valve. We have observed a primary pulse with larger helium droplets traveling at a slower speed and a rebound pulse with smaller droplets at a faster speed. In addition, the pickup efficiency of dopant is higher for the primary pulse when the nozzle temperature is higher than 13 K, and the total time duration of the doped droplet pulse is only on the order of 20 μs. These results stress the importance of fast and easy characterization of the droplet beam for sensitive measurements such as electron diffraction of doped droplets.

Review of Scientific Instruments•Aug 1, 2015•14 citations

Pulsed metastable atomic beam source for time-of-flight applications

Armin KOHLHASE, Shigetomo KITA

A metastable atomic beam source was developed utilizing pulsed helium and argon nozzle beams. A coaxial electron gun, which can be used in a pulsed as well as in a continuous mode, excites the noble gases to their metastable states by electron bombardment in the direction of propagation of the ground-state atoms. In contrast to former work, the electron beam is controlled and accelerated by a combination of three hemispherically shaped tungsten grids. With continuous electron gun operation the source produces a metastable flux of about 1015 atoms/sr s for helium and argon under optimum expansion conditions. Applying short electrical pulses to a control grid yields supersonic metastable atom pulses, with velocity distributions having a relative width as low as 3.8% for helium and 6.5% for argon ( FWHM ) with a 100% modulation of the metastable beams. These features make the source applicable for velocity analyzed scattering experiments using the time-of-flight technique.

Review of Scientific Instruments•Dec 1, 1986•16 citations

A pulsed supersonic expansion with a source temperature below 100 K

J. P. Bucher, Dean C. Douglass, P. Xia +1 more

We have produced a pulsed supersonic expansion of helium with an effective pre-expansion temperature below 100 K. This low initial gas temperature is achieved by cooling a pulsed gas valve and gas channel with liquid nitrogen. The resulting supersonic helium beam has a translational velocity that is approximately 55% that of the room-temperature source and an internal temperature of 270 mK. The increased Mach number for a cold supersonic expansion agrees with theoretical predictions and reflects the increased cross section of helium at low collision energies.

Review of Scientific Instruments•Sep 1, 1990•16 citations

Ultra-precise particle velocities in pulsed supersonic beams

Wolfgang Christen

We describe an improved experimental method for the generation of cold, directed particle bunches, and the highly accurate determination of their velocities in a pulsed supersonic beam, allowing for high-resolution experiments of atoms, molecules, and clusters. It is characterized by a pulsed high pressure jet source with high brilliance and optimum repeatability, a flight distance of few metres that can be varied with a tolerance of setting of 50 μm, and a precision in the mean flight time of particles of better than 10(-4). The technique achieves unmatched accuracies in particle velocities and kinetic energies and also permits the reliable determination of enthalpy changes with very high precision.

The Journal of Chemical Physics•Jul 8, 2013•6 citations

Velocity Distributions In Beams Of Metastable Atoms Excited By Electron Impact.

J. C. Pearl

Variation of peak intensity of 2^3 helium velocity distributions with detector angle 45 4.1 Simplified beam geometry for time-of-flight calculations 48 4.2 Time-of-flight spectra for velocity dis tributions of Figure 3.1 51 4.3 Range of integration for time-of-flight integral 544.4 Time-of-flight spectra for model metastable helium velocity distribution for finite beam width, A 56 4.5 Time-of-flight spectra for model metastable helium velocity distribution for finite pulse duration, T 56 4.6 Time-of-flight spectra for a Maxwellian metastable beam, with finite beam width, A. 60 4.7 Time-of-flight spectra for a Maxwellian meta stable beam, with finite pulse duration, T 61 5*1 Pictorial representation of experiment for measurement of metastable velocity dis tributions 64 5*2 Functional diagram of the apparatus used for time-of-flight measurements 66 lx Figure Page 5.3 Time-of-flight spectra for metastable 2^3 helium showing experimental data 69 6.1 Metastable velocity distributions for 2^3 helium, showing effect of exciting different metastable states 74 6.2 Energy and angle dependences of 2^3 helium excitation function 77 6.3 Velocity distributions at the 2^3 helium resonances 78 6.4 Velocity distributions for 2 2S^ hydrogen 80 7*1 Measured velocity distribution for H(23) beam showing theoretical fit 82 II.1 Cylindrical envelope of metastable velocities which arise from a collimated ground state beam 94 II.2 Geometrical interpretation of metastable velocity distribution function g(v) 96 III.1 Velocity space cartesian coordinate systems used in describing the cylindrical envelope of metastable velocities 104 x ABSTRACT This thesis is concerned with the velocity distribu tion in a beam of metastable atoms produced from ground state atoms by electron impact excitation.A relation between the velocity distribution functions in the ground state and metastable beams is derived, assuming that the electron beam is well collimated and monoenergetic, and that the scattering of the electrons by the atoms is isotropic.In the case where the ground state beam is well col limated and has a Maxwellian velocity distribution, it is shown that a measured distribution in the resulting meta stable beam should be distinctly non-Maxwellian.In gen eral, it is characterized by two peaks and by the existence of sharp cutoff velocities which are themselves very sensi tive functions of the alignment of the ground state and electron beams, the position of the metastable deteotor, and the energy of the incident electrons.Collimation of the ground state and of the metastable beams also strongly affects the distribution.A simple experiment is described which verifies these effects in a helium 2^3 beam.For the case where the ground state gas enters the electron beam isotropically, the double peaked structure disappears.However, the metastable velocity distribution xi may still deviate significantly from that of the ground state gas.Extension of the calculations shows that non-isotropic electron scattering may affect the metastable velocity dis tribution strongly.A simple parametrization is derived to compare the distributions for different gases and/or differ ent excited states.Several experiments in which such distorted velocity distributions can introduce systematic errors are briefly discussed.

•Jan 1, 1970•0 citations
A synchronous time-of-flight (TOF) technique is employed to make velocity distribution measurements in pulsed supersonic free-jet expansions. For helium expansions, the flow attains a steady–state condition with a terminal Mach number of 80, on a 50-μs time scale. The transient behavior is primarily due to the mechanical action of the valve. For a 650-μs-wide pulse, greater than 95% of the atoms issuing from the pulsed nozzle can be described by the steady-state parameters. However, the velocity dispersion increases at both the leading and trailing edges of the pulse. This dispersion can be quantitatively described by incorporating a time-dependent Mach number into the standard steady-state flux velocity distribution function.
We describe a generally applicable method for the experimental determination of stationary flow conditions in pulsed supersonic beams, utilizing time-resolved electron induced fluorescence measurements of high pressure jet expansions of helium. The detection of ultraviolet photons from electronically excited helium emitted very close to the nozzle exit images the valve opening behavior-with the decided advantage that a photon signal is not affected by beam-skimmer and beam-residual gas interactions; it thus allows to conclusively determine those operation parameters of a pulsed valve that yield complete opening. The studies reveal that a "flat-top" signal, indicating constant density and commonly considered as experimental criterion for continuous flow, is insufficient. Moreover, translational temperature and mean terminal flow velocity turn out to be significantly more sensitive in testing for the equivalent behavior of a continuous nozzle source. Based on the widely distributed Even-Lavie valve we demonstrate that, in principle, it is possible to achieve quasi-continuous flow conditions even with fast-acting valves; however, the two prerequisites are a minimum pulse duration that is much longer than standard practice and previous estimates, and a suitable tagging of the appropriate beam segment.
We present two facile time-of-flight (TOF) methods of detecting superfluid helium droplets and droplets with neutral dopants. Without an electron gun and with only a heated filament and pulsed electrodes, the electron impact ionization TOF mass spectrometer can resolve ionized helium clusters such as He2(+) and He4(+), which are signatures of superfluid helium droplets. Without ionizing any helium atoms, multiphoton non-resonant laser ionization of CCl4 doped in superfluid helium droplets at 266 nm generates complex cluster ions of dopant fragments with helium atoms, including (He)(n)C(+), (He)(n)Cl(+), and (He)(n)CCl(+). Using both methods, we have characterized our cryogenic pulsed valve—the Even-Lavie valve. We have observed a primary pulse with larger helium droplets traveling at a slower speed and a rebound pulse with smaller droplets at a faster speed. In addition, the pickup efficiency of dopant is higher for the primary pulse when the nozzle temperature is higher than 13 K, and the total time duration of the doped droplet pulse is only on the order of 20 μs. These results stress the importance of fast and easy characterization of the droplet beam for sensitive measurements such as electron diffraction of doped droplets.
A metastable atomic beam source was developed utilizing pulsed helium and argon nozzle beams. A coaxial electron gun, which can be used in a pulsed as well as in a continuous mode, excites the noble gases to their metastable states by electron bombardment in the direction of propagation of the ground-state atoms. In contrast to former work, the electron beam is controlled and accelerated by a combination of three hemispherically shaped tungsten grids. With continuous electron gun operation the source produces a metastable flux of about 1015 atoms/sr s for helium and argon under optimum expansion conditions. Applying short electrical pulses to a control grid yields supersonic metastable atom pulses, with velocity distributions having a relative width as low as 3.8% for helium and 6.5% for argon ( FWHM ) with a 100% modulation of the metastable beams. These features make the source applicable for velocity analyzed scattering experiments using the time-of-flight technique.
We have produced a pulsed supersonic expansion of helium with an effective pre-expansion temperature below 100 K. This low initial gas temperature is achieved by cooling a pulsed gas valve and gas channel with liquid nitrogen. The resulting supersonic helium beam has a translational velocity that is approximately 55% that of the room-temperature source and an internal temperature of 270 mK. The increased Mach number for a cold supersonic expansion agrees with theoretical predictions and reflects the increased cross section of helium at low collision energies.
We describe an improved experimental method for the generation of cold, directed particle bunches, and the highly accurate determination of their velocities in a pulsed supersonic beam, allowing for high-resolution experiments of atoms, molecules, and clusters. It is characterized by a pulsed high pressure jet source with high brilliance and optimum repeatability, a flight distance of few metres that can be varied with a tolerance of setting of 50 μm, and a precision in the mean flight time of particles of better than 10(-4). The technique achieves unmatched accuracies in particle velocities and kinetic energies and also permits the reliable determination of enthalpy changes with very high precision.
Variation of peak intensity of 2^3 helium velocity distributions with detector angle 45 4.1 Simplified beam geometry for time-of-flight calculations 48 4.2 Time-of-flight spectra for velocity dis tributions of Figure 3.1 51 4.3 Range of integration for time-of-flight integral 544.4 Time-of-flight spectra for model metastable helium velocity distribution for finite beam width, A 56 4.5 Time-of-flight spectra for model metastable helium velocity distribution for finite pulse duration, T 56 4.6 Time-of-flight spectra for a Maxwellian metastable beam, with finite beam width, A. 60 4.7 Time-of-flight spectra for a Maxwellian meta stable beam, with finite pulse duration, T 61 5*1 Pictorial representation of experiment for measurement of metastable velocity dis tributions 64 5*2 Functional diagram of the apparatus used for time-of-flight measurements 66 lx Figure Page 5.3 Time-of-flight spectra for metastable 2^3 helium showing experimental data 69 6.1 Metastable velocity distributions for 2^3 helium, showing effect of exciting different metastable states 74 6.2 Energy and angle dependences of 2^3 helium excitation function 77 6.3 Velocity distributions at the 2^3 helium resonances 78 6.4 Velocity distributions for 2 2S^ hydrogen 80 7*1 Measured velocity distribution for H(23) beam showing theoretical fit 82 II.1 Cylindrical envelope of metastable velocities which arise from a collimated ground state beam 94 II.2 Geometrical interpretation of metastable velocity distribution function g(v) 96 III.1 Velocity space cartesian coordinate systems used in describing the cylindrical envelope of metastable velocities 104 x ABSTRACT This thesis is concerned with the velocity distribu tion in a beam of metastable atoms produced from ground state atoms by electron impact excitation.A relation between the velocity distribution functions in the ground state and metastable beams is derived, assuming that the electron beam is well collimated and monoenergetic, and that the scattering of the electrons by the atoms is isotropic.In the case where the ground state beam is well col limated and has a Maxwellian velocity distribution, it is shown that a measured distribution in the resulting meta stable beam should be distinctly non-Maxwellian.In gen eral, it is characterized by two peaks and by the existence of sharp cutoff velocities which are themselves very sensi tive functions of the alignment of the ground state and electron beams, the position of the metastable deteotor, and the energy of the incident electrons.Collimation of the ground state and of the metastable beams also strongly affects the distribution.A simple experiment is described which verifies these effects in a helium 2^3 beam.For the case where the ground state gas enters the electron beam isotropically, the double peaked structure disappears.However, the metastable velocity distribution xi may still deviate significantly from that of the ground state gas.Extension of the calculations shows that non-isotropic electron scattering may affect the metastable velocity dis tribution strongly.A simple parametrization is derived to compare the distributions for different gases and/or differ ent excited states.Several experiments in which such distorted velocity distributions can introduce systematic errors are briefly discussed.