Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films

Model studies of tunneling time

Z.-H. Huang, Paul H. Cutler, T. E. Feuchtwang, Emil Kazes, H. Q. Nguyen, T. E. Sullivan

Published Jan 1, 1990• 12 citations
Publisher

Abstract

The precise definition and physical interpretation of a tunneling time is a fundamental problem in quantum mechanics. The lack of a well-defined time operator in quantum theory precludes the calculation of time in terms of an expectation value. Consequently, model calculations and simulation studies have been proposed and used to determine the time for a particle to traverse a quantum-mechanical barrier. The results offer both qualitatively and quantitatively, disparate predictions. One of the more commonly used approaches is the phase method, which we have applied to several one-dimensional model potentials to show that the tunneling time is characterized by the ratio of the typical decay length in the barrier to the incident velocity, τ∼(1/κ)/v0. We also show that the phase and the spin precession methods are equivalent when the magnetic field is applied throughout the space containing the particle wave function and the tunneling barrier. In principle, the spin precession method can be regarded as an operational definition of the tunneling time. It also has been shown that a tunneling time can be defined operationally for a time-dependent barrier, for which the model calculations predict a tunneling time given by the mean barrier width divided by the magnitude of the imaginary velocity of the particle in the barrier, τ∼d/‖v‖. This pseudokinematic result has been inferred by magnetic field dependent tunneling through heterostructures and computer simulation of wave packet tunneling through one-dimensional square barriers. Other tunneling time theories predict one or the other of the above mentioned characteristic times; several theories predict both. We interpret these different results for τ to mean that a tunneling time is not uniquely defined as a function of particle energy and the barrier shape unless the process in which the tunneling is involved is also specified. That is, the tunneling time is a meaningful and unique concept only for particular tunneling processes or definite operational procedures.

DOI
10.1116/1.577061

Related papers

Traversal Times for Resonant Tunneling

Uri Peskin, Michael Galperin, Abraham Nitzan

The tunneling time of a particle through a given barrier is commonly defined in terms of “internal clocks” that effectively measure the interaction time with internal degrees of freedom of the barrier. It is known that this definition of the time scale for tunneling is not unique in the sense that it depends on the clock used to define it. For the case of resonance tunneling, a particular choice that in the limit of a high/broad square barrier yields the original result of Büttiker and Landauer ( Phys. Rev. Lett. 1982, 49, 1739) is correlated to the lifetime of the resonance state. This is illustrated for analytically solvable one-dimensional double barrier models and for a realistic model of electron tunneling through a static water barrier. The latter calculation constitutes a novel application of this concept to a 3-dimensional model, and the observed structure in the energy dependence of the computed traversal time reflects the existence of transient tunneling resonances associated with instantaneous water structures. These models, characterized by the existence of shape resonances in the barrier, make it possible to examine different internal clocks that were proposed for measuring tunneling times in situations where a “clock independent” intrinsic time scale (the resonance lifetime) for the tunneling time exists. It is argued that this time may be used in order to estimate the relative importance of dynamical barrier processes that affect the tunneling probability.

arXiv:cond-mat/0207019•The Journal of Physical Chemistry B•Jul 9, 2002•7 citations

Path-integral analysis of the time delay for wave-packet scattering and the status of complex tunneling times

D. Sokolovski, J. N. L. Connor

The wave-packet simulation (WPS) method for calculating the time a tunneling particle spends inside a one-dimensional potential barrier is reexamined using the Feynman path-integral technique. Following earlier work by Sokolovski and Baskin [Phys. Rev. A 36, 4604 (1987)], the tunneling (or traversal) time ${\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}$ is defined as a matrix element of a classical nonlocal functional between two states that represent the initial and transmitted wave packets. These states do not lie on the same orbit in Hilbert space; as a result, ${\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}$ is complex-valued. It is shown that Re${\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}$ reduces to the standard WPS result, ${\mathit{t}}_{\mathrm{phase}}^{\mathit{T}}$, for conditions similar to those employed in the conventional WPS analysis. Similarly, Im${\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}$ is shown to contain information about the energy dependence of the transmission probability. Under semiclassical conditions, Im${\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}$ reduces to the well-known Wentzel-Kramers-Brillouin expression for the tunneling time. It is shown there are different definitions for the traversal time of a classical moving object, whose size is comparable to the width of the region of interest. In the quantum case, these different definitions correspond to different ways of analyzing the WPS experiment. The path-integral approach demonstrates that the tunneling-time problem is one of understanding the physical significance of complex-valued off-orbit matrix elements of an operator or functional. The physical content of complex-valued tunneling times is discussed. It is emphasized that the use of complex tunneling times includes real-time approaches as a special case. Nevertheless, there is a limitation in the description of tunneling experiments using tunneling times, whether real or complex. The path-integral approach does not supply a universal traversal time, analogous to a classical time, that can be used in quantum situations. It is demonstrated that the often expressed hope of finding a well-defined and universal real tunneling time is erroneous.

Physical Review A•Dec 1, 1990•73 citations

Tunneling times and excited state interactions between chromophores

Regien G. Stomphorst

This Thesis consists of two related parts. The first part (Chapters 2 and 3) presents the results of a fundamental theoretical study of the interpretation of quantum mechanics, and particularly of tunneling processes. Part two (Chapters 4, 5, and 6) describes the experimental results of spectroscopic investigations of quantum mechanical interactions between chromophores, which may play a role in electron transport by means of tunneling.The formulation of the quantum theory at the beginning of the twentieth century resulted in a scientific revolution. The impact of this theory on our physical world picture is still visible today. The quantum theory is impressively successful in its predictions of the outcomes of experiments, but the interpretation of the theory is still shaky. The predictions of quantum mechanics about the outcome of experiments are detailed and testable, but the meaning of the theory for quantum systems, in which no measurement has taken place is not clear. Various interpretations exist. Two of these are compared in Chapter 2. The first is the orthodox or Copenhagen interpretation, which was advocated by the Copenhagen-based Niels Bohr. His followers claimed that, in the orthodox interpretation, nothing can be said about the properties of systems if no suitable measurement has been carried out. The alternative is the causal interpretation of quantum mechanics, in which a particle, e.g. an electron, has a well-defined position and velocity at each instant of time independent of a measurement act. The causal theory does not assign a special role to the observer. In the causal interpretation the location as a function of time amounts to trajectories. The two interpretations are empirically equivalent, i.e. they predict the same experimental outcomes.In Chapter 2 the meaning of the two interpretations is clarified by the notion of tunneling time. Tunneling is the quantum mechanical phenomenon that a particle can cross a barrier even if its energy is less than the barrier energy. The time a particle takes to tunnel is the tunneling time. Time is a confusing concept: quantum theory appears not to know how to handle this topic. Time appears in the quantum mechanical formulae as a parameter, and not as an operator that corresponds to an observable quantity. Since an unambiguous time operator is missing, it is interesting to see what different interpretations have to say about tunneling times. It is strictly speaking impossible to define tunneling times in the orthodox interpretation because of the lack of a clear time operator, of which the expectation value can be observed by experiment. In the causal interpretation, every trajectory corresponds to a possible path of an electron. The density functions determine the probability that particles move on particular trajectories. This is how the stochastic character of quantum mechanics is accounted for in this interpretation. The transmission time is defined as the time spent inside the barrier by the electrons that eventually cross the barrier. The average transmission time can be defined by means of the trajectories, both in the case of stationary wave functions and in that of time-dependent, Gaussian wave packets. The Gaussian wave packets travel from minus infinity to plus infinity. On the way they meet potential barriers, which cause them to be reflected or transmitted. The process by which an electron moves from one chromophore to another can be described as tunneling because of the high potential barrier formed by the medium between the chromophores. In this Thesis the experimental media used are polymer films and apolar solutions. The model described in Chapter 2 is generally used in the literature but appears not to be applicable for a system of two chromophores and a tunneling electron, because electrons belonging to chromophores neither start in infinity nor go to infinity. A better model, a double potential well, is used in Chapter 3. The conclusion of Chapter 2 is that the transmission time can be defined in the causal interpretation when time-dependent wave packets are used.Chapter 3 illustrates the preceding by tunneling of a particle from one potential well to another passing a potential barrier. This model is the so-called double potential well. Examples are primary charge separation in the photosynthetic reaction center and in artificial model systems of chromophores in solutions and polymer films. The latter two cases are investigated spectroscopically in this Thesis. In these molecular systems, effective electron transport between chromophores after absorption of light takes place, yielding charge separation, i.e. the formation of chromophore cations. During their transport between natural or artificial chromophores, the released electrons often have to pass weak conducting media, corresponding to high potential barriers. If the energy of the electron exceeds the energy of the potential barrier, electron transport can be explained by classical theories. However, if the energy of the electron falls below the energy of the potential barrier, this is no longer possible. The transport mechanism is then understood as quantum mechanical tunneling. Experimental proof of tunneling has been found at low temperatures in photosynthesis.In Chapter 3 the chromophores and the tunneling electrons are described by double potential wells. Each well represents a chromphore and the space between the molecules a potential barrier. The formalism of the causal interpretation is applied to define a transmission time. The transmission time can be found using trajectories. An alternative method provides the average transmission time without calculating the trajectories. Arrival time distribution functions are defined and these are used to determine the average arrival time of the tunneling electrons at the entrance and at the exit of the barrier. Because arrival time distribution functions and hence both average arrival times and transmission times are not determined in an experimental context, we conclude that these definitions of transmission times are meaningless in the orthodox interpretation. The question posed at the end of Chapter 3 is whether, and if so how, these transmission times are experimentally accessible.The theoretical models developed in Chapters 2 and 3 are too simple to be extrapolated to real systems, such as electron transport between an electron donor and an acceptor, one of which is excited by light. Intermolecular interactions between excited electron donor molecules and ground state surrounding molecules cannot be neglected in chromophore films and solutions with relatively high concentrations of chromophores. These excitonic interactions should be included in adequate descriptions of electron transfer. Chapters 4, 5, and 6 describe these interactions using absorption and emission spectroscopy. In Chapter 4 a theoretical description of the absorption characteristics of chromophores in disordered films is given. At low concentrations, chromophores in films are mainly monomers. On statistical grounds, however, we conclude that some molecules are close enough together to form dimer-like structures, concentration pairs with characteristic absorption spectra. The presence of these concentration pairs influences the emission characteristics of chromophore films as well. When monomer electrons are excited by the absorption of photons, the electrons might return to the ground state, giving off their energy as fluorescence. Light energy can also be transferred to neighboring concentration pairs, in which case the fluorescence is quenched.The aim of Chapter 4 is to estimate the influence of potential quenchers in the vicinity of excited monomers and to predict the influence of these quenchers on the absorption spectra. The transfer of energy from monomers to concentration pairs, the so-called Förster transfer, takes place over quite large distances (1-5 nm). Statistics can be used to calculate the number of quenchers in particular concentrations of chromophores. In the literature it is assumed that two monomers that form a concentration pair are randomly oriented with respect to each other. If these pairs consisted of randomly oriented monomers and all fluctuations are taken into account, it appears on theoretical grounds that there would not be enough quenchers to describe the experimental changes. Because most chromophores are elongated or pancake-like, they are not randomly oriented but exhibit preferential orientations. These preferential orientations increase the efficiency of fluorescence quenching and theory and experiment are thereby reconciled. An analytical expression of the spectral changes compared to monomeric spectra of randomly oriented dimers is presented. To describe the interaction between chromophores that have one dominant transition dipole moment, a point dipole exciton model is used. To enhance the description of the spectral changes, homogeneous and inhomogeneous line broadening and monomer-to- monomer distance fluctuations should be taken into account. Inclusion of these factors in the model gives rise to the conclusion that the dimer spectra are broadened compared to the monomeric spectra and that the broadening is stronger at the blue end than at the red end of the spectra. However, to detect the blue-shifted spectral profile of randomly oriented dime-like samples, the concentration needs to be so high that isolated dimers cannot be observed. Then, simulation of the dimers becomes impossible, and all mutual interactions must be taken into account. Modeling of these interactions shows that the blue shift is not visible, and that only a broadening of the absorption spectra with respect to the monomeric spectra remains.Chapter 5 describes spectral changes that result from changes in the concentration changes of elongated Erythrosin-B (Ery B) chromophores in polyvinylalcohol (PVA) films. At low concentrations, monomers ar

Socio-Environmental Systems Modeling•Jan 1, 2001•0 citations

Some important aspects of the tunneling phenomenon through quantum structures

E. Polatdemir

Tunneling phenomenon is one of the wondrous events that take place particularly in quantum mechanics and it has no counterpart in classical physics. We focus on its two important implications : tunneling time and tunneling probability. There has been no consensus on tunneling times among the tunneling time community for last seven decades. So far, most of the attempts to calculate tunneling times have apparently been centered on a simple rectangular barrier example. We implement the tunneling times with the most widely accepted approach, which is using physical Larmor clock, into a nonsymmetrical barrier and a double barrier. It results in different and unique insights into the usual understanding of tunneling time. Three characteristics tunneling time expressions are thoroughly studied in these quantum structures. The difference between dwell time and phase-delay time is once again approved. The unique characteristics of the phase-delay time, which was thought to be exactly similar to dwell time when we assign higher energies to the particles, is also revealed in the nonsymmetrical barrier that it should actually be regarded as a distinct feature from the dwell time. The singularity of reflection time in rectangular barrier is no longer valid in nonsymmetrical barrier. The finiteness of reflection time fairly shows that different quantum structures might bear some taboo breaking results. Since a double barrier involves much more complicated features and calculations, the calculation of tunneling times under this barrier is praiseworthy. The dwell time is the most crucial, troublesome and distinctive tunneling time element to look into for a double barrier. Besides the dwell and phase-delay time, we also calculate the three characteristic times as well as the reflection time for a double barrier. Another area that we study within the context of tunneling phenomenon is the tunneling probability. Recently, there has been ground shaking attempts in modifying the conventional WKB formulae. We follow one of the modified versions of WKB formulae in order to be able to calculate the tunneling probability through different quantum structures where conventional WKB formulae fail. These generalized WKB connection formulae are applied to some complex quantum potentials by seeking aid from the Green's function and the path integral approach. One of the biggest problems in quantum mechanics (visualization) is partially overcome through implementing the method of diagrammatic representations that make the life easier in understanding the events happening in the quantum world when we attempt to calculate the transmission and reflection probabilities. This part therefore has a pedagogical sense too in terms of interpreting the results in a diagrammatic way with the help of the path integral approach.

•Jan 1, 2002•0 citations

Simple approach to computing tunneling time: Test cases

Chandan Kumar Mondal, Kaushik Maji, S. P. Bhattacharyya

Abstract We suggest a recipe for calculating the time taken by a particle to tunnel out from an initially localized state in one of the wells of symmetrical double‐well potential into the other well. We calculate average velocity 〈v̄〉 of the tunneling particle by solving the Schrödinger equation numerically for Ψ(x, t), then estimating 〈v(t)〉 = (d/dt)〈x(t)〉 and time‐averaging it. The time taken to tunnel is measured by calculating τav = l0/〈v̄〉 where l0 is an idealized estimate of the barrier width. We suggest an approximate partitioning of τav into an intrinsic decay time (τd) and a barrier crossing time (τb), τd being obtained from energy spread of the packet. τav − τd is shown to be close to the Wentzel‐Brillouin‐Kramers estimate of barrier crossing time τsc. The response of τav to an external driving field and nonzero temperatures are tested. We also apply the method to a purely barrier penetration problem as well as to the problem of tunneling through a fluctuating barrier. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003

International Journal of Quantum Chemistry•Jan 1, 2003•7 citations

Quantum tunnelling time at long wavelengths

Zheng Shu, Da-Wei Tian, Jing-Yu Zhang +3 more

Abstract Quantum tunnelling is a fundamental phenomenon in quantum physics, yet the question of how long it takes for a particle to tunnel through a barrier remains a topic of ongoing debate. Recent advances in attoclock experimental techniques in strong-field physics have renewed interest in this topic. While various definitions of tunneling time have been proposed, a consensus has yet to be reached. In this study, we adopt a definition of tunnelling time based on the ratio of the barrier width to the expected value of the velocity operator within the barrier. This approach reduces to the Büttiker-Landauer time ($\tau_{BL}$) in the case of an opaque barrier and offers a clear physical interpretation for very thin barriers, where $\tau_{BL}$ may not be well-defined. Additionally, by utilizing a virtual detector at the tunnel exit, we calculate the time delay between the peak of the electric field and the moment of ionization for long wavelengths ($\geq$6 $\mu$m). Our findings indicate that the time delay stabilizes around 190 as, remaining independent of the laser wavelength. Furthermore, through our quantum tunnelling time definition, this time delay can be interpreted as the time required for the electron to tunnel from a point within the barrier to the exit.

Chinese Physics B•Mar 12, 2026•0 citations
The precise definition and physical interpretation of a tunneling time is a fundamental problem in quantum mechanics. The lack of a well-defined time operator in quantum theory precludes the calculation of time in terms of an expectation value. Consequently, model calculations and simulation studies have been proposed and used to determine the time for a particle to traverse a quantum-mechanical barrier. The results offer both qualitatively and quantitatively, disparate predictions. One of the more commonly used approaches is the phase method, which we have applied to several one-dimensional model potentials to show that the tunneling time is characterized by the ratio of the typical decay length in the barrier to the incident velocity, τ∼(1/κ)/v0. We also show that the phase and the spin precession methods are equivalent when the magnetic field is applied throughout the space containing the particle wave function and the tunneling barrier. In principle, the spin precession method can be regarded as an operational definition of the tunneling time. It also has been shown that a tunneling time can be defined operationally for a time-dependent barrier, for which the model calculations predict a tunneling time given by the mean barrier width divided by the magnitude of the imaginary velocity of the particle in the barrier, τ∼d/‖v‖. This pseudokinematic result has been inferred by magnetic field dependent tunneling through heterostructures and computer simulation of wave packet tunneling through one-dimensional square barriers. Other tunneling time theories predict one or the other of the above mentioned characteristic times; several theories predict both. We interpret these different results for τ to mean that a tunneling time is not uniquely defined as a function of particle energy and the barrier shape unless the process in which the tunneling is involved is also specified. That is, the tunneling time is a meaningful and unique concept only for particular tunneling processes or definite operational procedures.
The tunneling time of a particle through a given barrier is commonly defined in terms of “internal clocks” that effectively measure the interaction time with internal degrees of freedom of the barrier. It is known that this definition of the time scale for tunneling is not unique in the sense that it depends on the clock used to define it. For the case of resonance tunneling, a particular choice that in the limit of a high/broad square barrier yields the original result of Büttiker and Landauer ( Phys. Rev. Lett. 1982, 49, 1739) is correlated to the lifetime of the resonance state. This is illustrated for analytically solvable one-dimensional double barrier models and for a realistic model of electron tunneling through a static water barrier. The latter calculation constitutes a novel application of this concept to a 3-dimensional model, and the observed structure in the energy dependence of the computed traversal time reflects the existence of transient tunneling resonances associated with instantaneous water structures. These models, characterized by the existence of shape resonances in the barrier, make it possible to examine different internal clocks that were proposed for measuring tunneling times in situations where a “clock independent” intrinsic time scale (the resonance lifetime) for the tunneling time exists. It is argued that this time may be used in order to estimate the relative importance of dynamical barrier processes that affect the tunneling probability.
The wave-packet simulation (WPS) method for calculating the time a tunneling particle spends inside a one-dimensional potential barrier is reexamined using the Feynman path-integral technique. Following earlier work by Sokolovski and Baskin [Phys. Rev. A 36, 4604 (1987)], the tunneling (or traversal) time tpackT{\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}tpackT​ is defined as a matrix element of a classical nonlocal functional between two states that represent the initial and transmitted wave packets. These states do not lie on the same orbit in Hilbert space; as a result, tpackT{\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}tpackT​ is complex-valued. It is shown that RetpackT{\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}tpackT​ reduces to the standard WPS result, tphaseT{\mathit{t}}_{\mathrm{phase}}^{\mathit{T}}tphaseT​, for conditions similar to those employed in the conventional WPS analysis. Similarly, ImtpackT{\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}tpackT​ is shown to contain information about the energy dependence of the transmission probability. Under semiclassical conditions, ImtpackT{\mathit{t}}_{\mathrm{pack}}^{\mathit{T}}tpackT​ reduces to the well-known Wentzel-Kramers-Brillouin expression for the tunneling time. It is shown there are different definitions for the traversal time of a classical moving object, whose size is comparable to the width of the region of interest. In the quantum case, these different definitions correspond to different ways of analyzing the WPS experiment. The path-integral approach demonstrates that the tunneling-time problem is one of understanding the physical significance of complex-valued off-orbit matrix elements of an operator or functional. The physical content of complex-valued tunneling times is discussed. It is emphasized that the use of complex tunneling times includes real-time approaches as a special case. Nevertheless, there is a limitation in the description of tunneling experiments using tunneling times, whether real or complex. The path-integral approach does not supply a universal traversal time, analogous to a classical time, that can be used in quantum situations. It is demonstrated that the often expressed hope of finding a well-defined and universal real tunneling time is erroneous.
This Thesis consists of two related parts. The first part (Chapters 2 and 3) presents the results of a fundamental theoretical study of the interpretation of quantum mechanics, and particularly of tunneling processes. Part two (Chapters 4, 5, and 6) describes the experimental results of spectroscopic investigations of quantum mechanical interactions between chromophores, which may play a role in electron transport by means of tunneling.The formulation of the quantum theory at the beginning of the twentieth century resulted in a scientific revolution. The impact of this theory on our physical world picture is still visible today. The quantum theory is impressively successful in its predictions of the outcomes of experiments, but the interpretation of the theory is still shaky. The predictions of quantum mechanics about the outcome of experiments are detailed and testable, but the meaning of the theory for quantum systems, in which no measurement has taken place is not clear. Various interpretations exist. Two of these are compared in Chapter 2. The first is the orthodox or Copenhagen interpretation, which was advocated by the Copenhagen-based Niels Bohr. His followers claimed that, in the orthodox interpretation, nothing can be said about the properties of systems if no suitable measurement has been carried out. The alternative is the causal interpretation of quantum mechanics, in which a particle, e.g. an electron, has a well-defined position and velocity at each instant of time independent of a measurement act. The causal theory does not assign a special role to the observer. In the causal interpretation the location as a function of time amounts to trajectories. The two interpretations are empirically equivalent, i.e. they predict the same experimental outcomes.In Chapter 2 the meaning of the two interpretations is clarified by the notion of tunneling time. Tunneling is the quantum mechanical phenomenon that a particle can cross a barrier even if its energy is less than the barrier energy. The time a particle takes to tunnel is the tunneling time. Time is a confusing concept: quantum theory appears not to know how to handle this topic. Time appears in the quantum mechanical formulae as a parameter, and not as an operator that corresponds to an observable quantity. Since an unambiguous time operator is missing, it is interesting to see what different interpretations have to say about tunneling times. It is strictly speaking impossible to define tunneling times in the orthodox interpretation because of the lack of a clear time operator, of which the expectation value can be observed by experiment. In the causal interpretation, every trajectory corresponds to a possible path of an electron. The density functions determine the probability that particles move on particular trajectories. This is how the stochastic character of quantum mechanics is accounted for in this interpretation. The transmission time is defined as the time spent inside the barrier by the electrons that eventually cross the barrier. The average transmission time can be defined by means of the trajectories, both in the case of stationary wave functions and in that of time-dependent, Gaussian wave packets. The Gaussian wave packets travel from minus infinity to plus infinity. On the way they meet potential barriers, which cause them to be reflected or transmitted. The process by which an electron moves from one chromophore to another can be described as tunneling because of the high potential barrier formed by the medium between the chromophores. In this Thesis the experimental media used are polymer films and apolar solutions. The model described in Chapter 2 is generally used in the literature but appears not to be applicable for a system of two chromophores and a tunneling electron, because electrons belonging to chromophores neither start in infinity nor go to infinity. A better model, a double potential well, is used in Chapter 3. The conclusion of Chapter 2 is that the transmission time can be defined in the causal interpretation when time-dependent wave packets are used.Chapter 3 illustrates the preceding by tunneling of a particle from one potential well to another passing a potential barrier. This model is the so-called double potential well. Examples are primary charge separation in the photosynthetic reaction center and in artificial model systems of chromophores in solutions and polymer films. The latter two cases are investigated spectroscopically in this Thesis. In these molecular systems, effective electron transport between chromophores after absorption of light takes place, yielding charge separation, i.e. the formation of chromophore cations. During their transport between natural or artificial chromophores, the released electrons often have to pass weak conducting media, corresponding to high potential barriers. If the energy of the electron exceeds the energy of the potential barrier, electron transport can be explained by classical theories. However, if the energy of the electron falls below the energy of the potential barrier, this is no longer possible. The transport mechanism is then understood as quantum mechanical tunneling. Experimental proof of tunneling has been found at low temperatures in photosynthesis.In Chapter 3 the chromophores and the tunneling electrons are described by double potential wells. Each well represents a chromphore and the space between the molecules a potential barrier. The formalism of the causal interpretation is applied to define a transmission time. The transmission time can be found using trajectories. An alternative method provides the average transmission time without calculating the trajectories. Arrival time distribution functions are defined and these are used to determine the average arrival time of the tunneling electrons at the entrance and at the exit of the barrier. Because arrival time distribution functions and hence both average arrival times and transmission times are not determined in an experimental context, we conclude that these definitions of transmission times are meaningless in the orthodox interpretation. The question posed at the end of Chapter 3 is whether, and if so how, these transmission times are experimentally accessible.The theoretical models developed in Chapters 2 and 3 are too simple to be extrapolated to real systems, such as electron transport between an electron donor and an acceptor, one of which is excited by light. Intermolecular interactions between excited electron donor molecules and ground state surrounding molecules cannot be neglected in chromophore films and solutions with relatively high concentrations of chromophores. These excitonic interactions should be included in adequate descriptions of electron transfer. Chapters 4, 5, and 6 describe these interactions using absorption and emission spectroscopy. In Chapter 4 a theoretical description of the absorption characteristics of chromophores in disordered films is given. At low concentrations, chromophores in films are mainly monomers. On statistical grounds, however, we conclude that some molecules are close enough together to form dimer-like structures, concentration pairs with characteristic absorption spectra. The presence of these concentration pairs influences the emission characteristics of chromophore films as well. When monomer electrons are excited by the absorption of photons, the electrons might return to the ground state, giving off their energy as fluorescence. Light energy can also be transferred to neighboring concentration pairs, in which case the fluorescence is quenched.The aim of Chapter 4 is to estimate the influence of potential quenchers in the vicinity of excited monomers and to predict the influence of these quenchers on the absorption spectra. The transfer of energy from monomers to concentration pairs, the so-called Förster transfer, takes place over quite large distances (1-5 nm). Statistics can be used to calculate the number of quenchers in particular concentrations of chromophores. In the literature it is assumed that two monomers that form a concentration pair are randomly oriented with respect to each other. If these pairs consisted of randomly oriented monomers and all fluctuations are taken into account, it appears on theoretical grounds that there would not be enough quenchers to describe the experimental changes. Because most chromophores are elongated or pancake-like, they are not randomly oriented but exhibit preferential orientations. These preferential orientations increase the efficiency of fluorescence quenching and theory and experiment are thereby reconciled. An analytical expression of the spectral changes compared to monomeric spectra of randomly oriented dimers is presented. To describe the interaction between chromophores that have one dominant transition dipole moment, a point dipole exciton model is used. To enhance the description of the spectral changes, homogeneous and inhomogeneous line broadening and monomer-to- monomer distance fluctuations should be taken into account. Inclusion of these factors in the model gives rise to the conclusion that the dimer spectra are broadened compared to the monomeric spectra and that the broadening is stronger at the blue end than at the red end of the spectra. However, to detect the blue-shifted spectral profile of randomly oriented dime-like samples, the concentration needs to be so high that isolated dimers cannot be observed. Then, simulation of the dimers becomes impossible, and all mutual interactions must be taken into account. Modeling of these interactions shows that the blue shift is not visible, and that only a broadening of the absorption spectra with respect to the monomeric spectra remains.Chapter 5 describes spectral changes that result from changes in the concentration changes of elongated Erythrosin-B (Ery B) chromophores in polyvinylalcohol (PVA) films. At low concentrations, monomers ar
Tunneling phenomenon is one of the wondrous events that take place particularly in quantum mechanics and it has no counterpart in classical physics. We focus on its two important implications : tunneling time and tunneling probability. There has been no consensus on tunneling times among the tunneling time community for last seven decades. So far, most of the attempts to calculate tunneling times have apparently been centered on a simple rectangular barrier example. We implement the tunneling times with the most widely accepted approach, which is using physical Larmor clock, into a nonsymmetrical barrier and a double barrier. It results in different and unique insights into the usual understanding of tunneling time. Three characteristics tunneling time expressions are thoroughly studied in these quantum structures. The difference between dwell time and phase-delay time is once again approved. The unique characteristics of the phase-delay time, which was thought to be exactly similar to dwell time when we assign higher energies to the particles, is also revealed in the nonsymmetrical barrier that it should actually be regarded as a distinct feature from the dwell time. The singularity of reflection time in rectangular barrier is no longer valid in nonsymmetrical barrier. The finiteness of reflection time fairly shows that different quantum structures might bear some taboo breaking results. Since a double barrier involves much more complicated features and calculations, the calculation of tunneling times under this barrier is praiseworthy. The dwell time is the most crucial, troublesome and distinctive tunneling time element to look into for a double barrier. Besides the dwell and phase-delay time, we also calculate the three characteristic times as well as the reflection time for a double barrier. Another area that we study within the context of tunneling phenomenon is the tunneling probability. Recently, there has been ground shaking attempts in modifying the conventional WKB formulae. We follow one of the modified versions of WKB formulae in order to be able to calculate the tunneling probability through different quantum structures where conventional WKB formulae fail. These generalized WKB connection formulae are applied to some complex quantum potentials by seeking aid from the Green's function and the path integral approach. One of the biggest problems in quantum mechanics (visualization) is partially overcome through implementing the method of diagrammatic representations that make the life easier in understanding the events happening in the quantum world when we attempt to calculate the transmission and reflection probabilities. This part therefore has a pedagogical sense too in terms of interpreting the results in a diagrammatic way with the help of the path integral approach.
Abstract We suggest a recipe for calculating the time taken by a particle to tunnel out from an initially localized state in one of the wells of symmetrical double‐well potential into the other well. We calculate average velocity 〈v̄〉 of the tunneling particle by solving the Schrödinger equation numerically for Ψ(x, t), then estimating 〈v(t)〉 = (d/dt)〈x(t)〉 and time‐averaging it. The time taken to tunnel is measured by calculating τav = l0/〈v̄〉 where l0 is an idealized estimate of the barrier width. We suggest an approximate partitioning of τav into an intrinsic decay time (τd) and a barrier crossing time (τb), τd being obtained from energy spread of the packet. τav − τd is shown to be close to the Wentzel‐Brillouin‐Kramers estimate of barrier crossing time τsc. The response of τav to an external driving field and nonzero temperatures are tested. We also apply the method to a purely barrier penetration problem as well as to the problem of tunneling through a fluctuating barrier. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003
Abstract Quantum tunnelling is a fundamental phenomenon in quantum physics, yet the question of how long it takes for a particle to tunnel through a barrier remains a topic of ongoing debate. Recent advances in attoclock experimental techniques in strong-field physics have renewed interest in this topic. While various definitions of tunneling time have been proposed, a consensus has yet to be reached. In this study, we adopt a definition of tunnelling time based on the ratio of the barrier width to the expected value of the velocity operator within the barrier. This approach reduces to the Büttiker-Landauer time (τBL\tau_{BL}τBL​) in the case of an opaque barrier and offers a clear physical interpretation for very thin barriers, where τBL\tau_{BL}τBL​ may not be well-defined. Additionally, by utilizing a virtual detector at the tunnel exit, we calculate the time delay between the peak of the electric field and the moment of ionization for long wavelengths ($\geq$6 μ\muμm). Our findings indicate that the time delay stabilizes around 190 as, remaining independent of the laser wavelength. Furthermore, through our quantum tunnelling time definition, this time delay can be interpreted as the time required for the electron to tunnel from a point within the barrier to the exit.