Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Korean Physical Society

A Comparison of Pulsed and Continuous Atom Transfer between Two Magneto-optical Traps

Surjya Prakash Ram, S. K. Tiwari, Satya Ram Mishra

Published Nov 15, 2010• 3 citations
Publisher
DOI
10.3938/jkps.57.1303

Related papers

Generation of a cold pulsed beam of Rb atoms by transfer from a 3D magneto-optic trap

Sapam Ranjita Chanu, Ketan D. Rathod, Vasant Natarajan A

arXiv:1608.00385•Physics Letters A•Jul 16, 2016•4 citations

Improved transfer efficiency with pulsed atom transfer between two magneto-optical traps

Surjya Prakash Ram, Tiwari, S K, Satya Ram Mishra

In our double magneto-optical trap (MOT) setup containing a vapor chamber MOT (VC-MOT) and an ultra high vacuum MOT (UHV-MOT) for $^{87}$Rb atoms, we find that transfer of atoms from VC-MOT to UHV-MOT can be enhanced by employing a pulsed VC-MOT loading followed by a pulsed push beam, as compared to that obtained by focusing a continuous wave (CW) push beam on a continuously loaded VC-MOT. By choosing appropriately the VC-MOT duration and push beam duration, the number of atoms in UHV-MOT was $\sim$3-times the number obtained with a continuous VC-MOT and a CW push beam of optimized power. The processes affecting the pulsed transfer have been studied.

arXiv:1003.5519•Mar 29, 2010•1 citation

Investigations on Individual Atoms in Magneto-Optical and Magnetic Traps

S. aus-der-Wiesche, B. Ueberholz, Frank Strauch +2 more

European Quantum Electronics Conference (EQEC)•Jan 1, 1996•0 citations

Production and guidance of pulsed atomic beams on chip

Hui Yan, Yang Guo-Qing, Shi Tao +2 more

We demonstrated two experimental methods of producing and guiding pulsed atomic beams on chip. One is to trap atoms first in a U-type magneto-optical trap on the chip, then transfer them to the magnetic guide field and push them simultaneously by a continuous force from the power imbalance of the magneto-optical trap laser beams hence the pulsed cold atom beams are produced and move along the magnetic guide to the destination. The other is to trap atoms directly by a H-type magneto-optical trap, then push them to make them move along the magnetic guide field, thus high rate cold atom beams can be produced and guided on the chip.

Chinese Physics B•Feb 1, 2010•3 citations

Continuous transfer and laser guiding between two cold atom traps

Emiliya Dimova, Olivier Morizot, Guillaume Stern +6 more

arXiv:quant-ph/0609208•The European Physical Journal D•Feb 2, 2007•24 citations

An optically guided atomic fountain

Hilary Jane Davies

This thesis describes the development of a laser-cooling experiment aimed at efficient transfer of cold atoms over a short distance, for loading into a conservative atom trap. We detail the construction of a 3D magneto-optical trap (MOT) and perform characterisation measurements to optimise the number and temperature of the cold atoms. The atoms are launched vertically in a fountain from the MOT using a 'moving molasses' technique and a red-detuned far-off-resonant laser beam is used to guide them into an UHV chamber. Loading into the guiding beam is optimised with respect to the beam and MOT parameters. We demonstrate a maximum loading of 20% and guiding over a distance of more than 10 cm without loss of atoms. The atoms are delivered to the UHV chamber in a cloud with a transverse dimension of order 200 #mu#m. We discuss the extension to continuous operation of the guided atomic fountain. The 3D MOT is replaced by a funnel with 2D trapping and 3D cooling which continuously extracts the cold atoms using moving molasses. A comparison between the flux of guided atoms obtained in a pulsed fashion from the 3D MOT and continuously from the funnel indicate that the pulsed case is a factor of ten more efficient. The difference is due to inferior loading from the funnel. The optically guided fountain is used to load an optical dipole trap in the UHV chamber, using an 'optical trap door'. No additional cooling is required. The dynamics of the atoms in the optical dipole trap are studied. We discuss multiple loading of a conservative trap with the view of accumulating more atoms than can be obtained in a MOT. (author)

•Jan 1, 1999•0 citations
In our double magneto-optical trap (MOT) setup containing a vapor chamber MOT (VC-MOT) and an ultra high vacuum MOT (UHV-MOT) for 87^{87}87Rb atoms, we find that transfer of atoms from VC-MOT to UHV-MOT can be enhanced by employing a pulsed VC-MOT loading followed by a pulsed push beam, as compared to that obtained by focusing a continuous wave (CW) push beam on a continuously loaded VC-MOT. By choosing appropriately the VC-MOT duration and push beam duration, the number of atoms in UHV-MOT was $\sim$3-times the number obtained with a continuous VC-MOT and a CW push beam of optimized power. The processes affecting the pulsed transfer have been studied.
We demonstrated two experimental methods of producing and guiding pulsed atomic beams on chip. One is to trap atoms first in a U-type magneto-optical trap on the chip, then transfer them to the magnetic guide field and push them simultaneously by a continuous force from the power imbalance of the magneto-optical trap laser beams hence the pulsed cold atom beams are produced and move along the magnetic guide to the destination. The other is to trap atoms directly by a H-type magneto-optical trap, then push them to make them move along the magnetic guide field, thus high rate cold atom beams can be produced and guided on the chip.
This thesis describes the development of a laser-cooling experiment aimed at efficient transfer of cold atoms over a short distance, for loading into a conservative atom trap. We detail the construction of a 3D magneto-optical trap (MOT) and perform characterisation measurements to optimise the number and temperature of the cold atoms. The atoms are launched vertically in a fountain from the MOT using a 'moving molasses' technique and a red-detuned far-off-resonant laser beam is used to guide them into an UHV chamber. Loading into the guiding beam is optimised with respect to the beam and MOT parameters. We demonstrate a maximum loading of 20% and guiding over a distance of more than 10 cm without loss of atoms. The atoms are delivered to the UHV chamber in a cloud with a transverse dimension of order 200 #mu#m. We discuss the extension to continuous operation of the guided atomic fountain. The 3D MOT is replaced by a funnel with 2D trapping and 3D cooling which continuously extracts the cold atoms using moving molasses. A comparison between the flux of guided atoms obtained in a pulsed fashion from the 3D MOT and continuously from the funnel indicate that the pulsed case is a factor of ten more efficient. The difference is due to inferior loading from the funnel. The optically guided fountain is used to load an optical dipole trap in the UHV chamber, using an 'optical trap door'. No additional cooling is required. The dynamics of the atoms in the optical dipole trap are studied. We discuss multiple loading of a conservative trap with the view of accumulating more atoms than can be obtained in a MOT. (author)