Fundamental laws of quantum mechanics impose that arbitrary quantum states cannot be perfectly cloned or amplified without introducing some unavoidable noise in the process. The quantum noise intrinsic to the functioning of a linear phase-insensitive amplifier can however be avoided by relaxing the requirement of a deterministic operation. Non-deterministic noiseless linear amplifiers that do not violate any fundamental quantum law are therefore possible and here we present the first experimental realization of a scheme that allows noiseless amplification of coherent states at the best level of effective gain and final state fidelity ever reached. This scheme, based on a sequence of photon addition and subtraction, and characterized by a significant amplification and low distortions, may become a useful tool for quantum communications and metrology, by enhancing the discrimination between partially overlapping quantum states or by recovering the information transmitted over lossy channels.
Fundamental laws of quantum mechanics impose that arbitrary quantum states cannot be perfectly cloned or amplified without introducing some unavoidable noise in the process. The quantum noise intrinsic to the functioning of a linear phase-insensitive amplifier can however be avoided by relaxing the requirement of a deterministic operation. Non-deterministic noiseless linear amplifiers that do not violate any fundamental quantum law are therefore possible and here we present the first experimental realization of a scheme that allows noiseless amplification of coherent states at the best level of effective gain and final state fidelity ever reached. This scheme, based on a sequence of photon addition and subtraction, and characterized by a significant amplification and low distortions, may become a useful tool for quantum communications and metrology, by enhancing the discrimination between partially overlapping quantum states or by recovering the information transmitted over lossy channels.
Loss suppression is a major challenge in quantum communication and quantum computing, primarily due to the limitations imposed by the no-cloning theorem. We present a noiseless quantum amplifier capable of probabilistically increasing the amplitude of coherent states without introducing additional noise to the amplified state. This is achieved through the conditional addition and subtraction of photons. Previously, experimental photon addition was restricted to a single photon. Recently, we have pushed these boundaries, demonstrating photon addition of up to three photons for the first time [1], as well as the combination of conditional addition of two photons followed by their conditional subtraction [2]. Our advanced noiseless amplifier achieves high amplification gain, fidelity, and purity, with the quadrature variances of the noiselessly amplified coherent states remaining close to the minimum uncertainty limit. Figure 1 illustrates the performance of our amplifier compared to that of an amplifier based on single-photon addition and subtraction.
According to the fundamental laws of quantum optics, noise is necessarily added to the system when one tries to clone or amplify a quantum state. However, it has recently been shown that the quantum noise related to the operation of a linear phase-insensitive amplifier can be avoided when the requirement of a deterministic operation is relaxed. Nondeterministic noiseless linear amplifiers are therefore realizable. Usually nondeterministic amplifiers rely on using single photon sources. We have, in contrast, recently proposed an amplification scheme in which no external energy is added to the signal, but the energy required to amplify the signal originates from the stochastic fluctuations in the field itself. Applying our amplification scheme, we examine the amplifier gain and the success rate as well as the properties of the output states after successful and failed amplification processes. We also optimize the setup to find the maximum success rates in terms of the reflectivities of the beam splitters used in the setup. In addition, we discuss the nonidealities related to the operation of our setup and the relation of our setup with the previous setups.
Noiseless quantum amplifiers are probabilistic quantum devices that enhance the amplitude of coherent states without adding any noise, which has far reaching applications in quantum optics and quantum information processing. Here, we report on an experimental implementation of an advanced noiseless quantum amplifier for coherent states of light that is based on the conditional addition of two photons followed by the conditional subtraction of two photons. We comprehensively characterize the noiselessly amplified coherent states via quantum state tomography and analyze the amplification gain and noise properties of the amplifier. We observe very good agreement between the experiment and theoretical predictions. Our work reveals that sequences of multiple photon additions and subtractions represent an efficient and experimentally feasible alternative to multiplexing that was originally proposed to boost the performance of noiseless quantum amplifiers. Beyond noiseless quantum amplification, our experiment represents a significant step forward towards engineering complex quantum operations on traveling light beams by coherent combinations of various sequences of multiphoton additions and subtractions.
Large-scale quantum networking systems will inevitably require methods to overcome photon loss. While the no-cloning theorem forbids perfect and deterministic amplification of unknown quantum states, probabilistic heralded amplification schemes offer a viable path forward. Yet, for over a decade, successful multi-photon state amplification has remained out of reach, despite the fundamental importance of such states in achieving quantum advantage in optical applications. Here, we experimentally demonstrate a high-fidelity and post-selection-free amplifier for multi-photon states. We achieve heralded amplification of states with up to two photons in a single optical mode, with over a hundredfold intensity gain, and verify the coherence-preserving operation of our scheme. Our approach is scalable to higher photon numbers and enables noiseless amplification of complex multi-photon quantum states, with applications in large-scale quantum communication systems, distributed quantum metrology, and information processing.
A deterministic quantum amplifier inevitably adds noise to an amplified signal due to the uncertainty principle in quantum physics. We here investigate how a quantum-noise-limited amplifier can be improved by additionally employing the photon subtraction, the photon addition, and a coherent superposition of the two, thereby making a probabilistic, heralded, quantum amplifier. We show that these operations can enhance the performance in amplifying a coherent state in terms of intensity gain, fidelity, and phase uncertainty. In particular, the photon subtraction turns out to be optimal for the fidelity and the phase concentration among these elementary operations, while the photon addition also provides a significant reduction in the phase uncertainty with the largest gain effect.
We suggest and investigate a scheme for non-deterministic noiseless linear amplification of coherent states using successive photon addition, (â(†))(2), where â(†) is the photon creation operator. We compare it with a previous proposal using the photon addition-then-subtraction, ââ(†), where â is the photon annihilation operator, that works as an appropriate amplifier only for weak light fields. We show that when the amplitude of a coherent state is |α| ≳ 0.91, the (â(†))(2) operation serves as a more efficient amplifier compared to the ââ(†) operation in terms of equivalent input noise. Using ââ(†) and (â(†))(2) as basic building blocks, we compare combinatorial amplifications of coherent states using (ââ(†))(2), â(†4), ââ(†)â(†2), and â(†2)ââ(†), and show that (ââ(†))(2), â(†2)ââ(†), and â(†4) exhibit strongest noiseless properties for |α| ≲ 0.51, 0.51 ≲ |α| ≲ 1.05, and |α| ≳ 1.05, respectively. We further show that the (â(†))(2) operation can be useful for amplifying superpositions of the coherent states. In contrast to previous studies, our work provides efficient schemes to implement a noiseless amplifier for light fields with medium and large amplitudes.