Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review Letters

Stimulation of Tunneling by a High-Frequency Field: Decay of the Zero-Voltage State in Josephson Junctions

Boris I. Ivlev, V. I. Mel'Nikov

Published Oct 7, 1985• 49 citations
Publisher

Abstract

We find the tunneling decay rate $D$ of the zero-voltage states of a Josephson junction driven by a small ac current ${I}_{1}cos(\ensuremath{\Omega}t)$, when the dc current is close to the critical one. In the high-frequency limit $\ensuremath{\Omega}\ensuremath{\gg}{\ensuremath{\omega}}_{p}$ (${\ensuremath{\omega}}_{p}$ is the plasma frequency) for a high-$Q$ junction, the amplitude ${I}_{1}$ enters into the tunneling exponent with a large exponential factor and $\mathrm{ln}D\ensuremath{\propto}{I}_{1}\mathrm{exp}(\frac{1.77\ensuremath{\Omega}}{{\ensuremath{\omega}}_{p}})$.

DOI
10.1103/physrevlett.55.1614

Related papers

Decay of the Zero-Voltage State in Small-Area, High-Current-Density Josephson Junctions

L. D. Jackel, J. P. Gordon, Evelyn L. Hu +5 more

We have measured the distribution in current for the onset of voltage in small-area Josephson junctions for temperatures down to \ensuremath{\sim}1.6 K. The lifetime of the $〈V〉=0$ state for our highest current density junctions becomes temperature independent for ${k}_{\mathrm{B}}T\ensuremath{\lesssim}\frac{\ensuremath{\hbar}{\ensuremath{\omega}}_{0}}{20}$, a $T$ much less than the WKB prediction (${\ensuremath{\omega}}_{0}$ is the junction resonant frequency). This is consistent with the Caldeira-Leggett theory, which includes damping effects on the quantum tunneling rate.

Physical Review Letters•Aug 31, 1981•169 citations

A SIMPLE QUALITATIVE DETERMINATION OF JOSEPHSON TUNNEL JUNCTION PARAMETERS NEAR THE TRANSITION TEMPERATURE

N. F. Pedersen, J. Mygind, O. H. Soerensen +1 more

The junction capacitance may be determined and the cosϕ-amplitude may be estimated from the switching characteristics seen in the IV curve near the critical temperature. The method relies on the empirical observation that a small area tunnel junction returns from finite to zero voltage when the Josephson frequency is about equal to the plasma frequency.

Le Journal de Physique Colloques•Aug 1, 1978•3 citations

High-Frequency Response of Josephson Point Contacts

Helmut Kanter, F. L. Vernon

For a current-driven Josephson junction shunted by an Ohmic resistance, the dc voltage response and impedance to external high-frequency currents is calculated with a second-order perturbation method based on the unperturbed solution for the time evolution of the voltage as given by Aslamazov and Larkin. The response is proportional to signal power and has three characteristic-frequency regions depending on whether the internal self-generated Josephson frequency, ω0, is larger than, equal to, or smaller than the signal frequency, ω. For ω0< or >ω the response could be expressed by easily observable parameters of the dc voltage-current characteristics. This permits comparison of the predictions with experimental results obtained on point-contact junctions whose dc characteristics were only approximately represented by the simple model chosen for analysis. For ω0≪ω the response is found to be proportional to (i) the slope of the dc characteristic, (ii) the inverse square of the applied frequency, (iii) the inverse battery current in terms of the critical current, and (iv) the voltage amplitude of the inherent Josephson oscillations. For ω0≫ω ``classical'' detection proportional to curvature is obtained. For ω0∼ω resonance detection occurs, which depends to a considerable degree on fluctuations of the average contact voltage. These predictions are in reasonable agreement with experiments in which point-contact junctions were illuminated with klystron radiation at 10 and 90 GHz. Evidence is presented that the voltage fluctuations limiting the resonance response are the result of noise generated in the junction. Comparison of the noise-equivalent power expected from the simple model with measured results suggests that parasitic elements, such as shunt capacity, are not negligible at 90 GHz.

Journal of Applied Physics•Jul 1, 1972•101 citations

Time-resolved measurement of capacitance in a Josephson tunnel junction

Guozhu Sun, Jian Chen, Zhengming Ji +7 more

The capacitance of a Josephson tunnel junction is an important parameter, which determines its plasma frequency ωp and thus the energy level spacing in the quantum regime. When a microwave signal at the frequency of ω is applied to a current-biased junction in its zero-voltage state, the escape rate from this state is somehow enhanced. The enhancement is expected to go through a pronounced maximum when ωp=ω. Making use of such microwave generated resonant activation in the thermal regime, we have developed a time-resolved measurement scheme for determining the junction capacitance with an uncertainty of less than 2%.

Applied Physics Letters•Aug 21, 2006•11 citations

Cavity-mode excitation in a Josephson tunnel junction

Jhy-Jiun Chang, J. T. Chen

Using Takanaka's theory of the zero-field dc-current steps of a Josephson tunnel junction, we have studied the effect of the junction $Q$ factor on the shape of the current step near the first even-order resonant voltage $V=h\frac{{\ensuremath{\nu}}_{c}}{e}$, where ${\ensuremath{\nu}}_{c}$ is the frequency of the fundamental cavity mode. In addition, we have found that the effect of a magnetic field on the step height can be qualitatively explained by modifying Takanaka's theory to include a magnetic-field-dependent term.

Physical review. B, Condensed matter•Sep 1, 1980•15 citations

One-third (period three) harmonic generation in microwave-driven Josephson tunnel junctions

Jørn Bindslev Hansen, John L. Clarke, J. Mygind +2 more

One-third harmonic signals have been generated in the zero voltage state of a Josephson tunnel junction driven with a microwave current in the frequency range 8–20 GHz. The signal was as much as 50 dB above the noise level of the detector with a linewidth of less than 100 Hz. The junction parameters and microwave current were measured in situ in separate experiments. The subharmonic generation occurred for ranges of microwave current and frequency that were in reasonable agreement with the results of digital computer simulations.

Applied Physics Letters•Dec 22, 1986•3 citations
We find the tunneling decay rate DDD of the zero-voltage states of a Josephson junction driven by a small ac current I1cos(\ensuremathΩt){I}_{1}cos(\ensuremath{\Omega}t)I1​cos(\ensuremathΩt), when the dc current is close to the critical one. In the high-frequency limit \ensuremathΩ\ensuremath≫\ensuremathωp\ensuremath{\Omega}\ensuremath{\gg}{\ensuremath{\omega}}_{p}\ensuremathΩ\ensuremath≫\ensuremathωp​ (\ensuremathωp{\ensuremath{\omega}}_{p}\ensuremathωp​ is the plasma frequency) for a high-QQQ junction, the amplitude I1{I}_{1}I1​ enters into the tunneling exponent with a large exponential factor and lnD\ensuremath∝I1exp(1.77\ensuremathΩ\ensuremathωp)\mathrm{ln}D\ensuremath{\propto}{I}_{1}\mathrm{exp}(\frac{1.77\ensuremath{\Omega}}{{\ensuremath{\omega}}_{p}})lnD\ensuremath∝I1​exp(\ensuremathωp​1.77\ensuremathΩ​).
We have measured the distribution in current for the onset of voltage in small-area Josephson junctions for temperatures down to \ensuremath{\sim}1.6 K. The lifetime of the 〈V〉=0〈V〉=0〈V〉=0 state for our highest current density junctions becomes temperature independent for ${k}_{\mathrm{B}}T\ensuremath{\lesssim}\frac{\ensuremath{\hbar}{\ensuremath{\omega}}_{0}}{20}$, a TTT much less than the WKB prediction (${\ensuremath{\omega}}_{0}$ is the junction resonant frequency). This is consistent with the Caldeira-Leggett theory, which includes damping effects on the quantum tunneling rate.
For a current-driven Josephson junction shunted by an Ohmic resistance, the dc voltage response and impedance to external high-frequency currents is calculated with a second-order perturbation method based on the unperturbed solution for the time evolution of the voltage as given by Aslamazov and Larkin. The response is proportional to signal power and has three characteristic-frequency regions depending on whether the internal self-generated Josephson frequency, ω0, is larger than, equal to, or smaller than the signal frequency, ω. For ω0< or >ω the response could be expressed by easily observable parameters of the dc voltage-current characteristics. This permits comparison of the predictions with experimental results obtained on point-contact junctions whose dc characteristics were only approximately represented by the simple model chosen for analysis. For ω0≪ω the response is found to be proportional to (i) the slope of the dc characteristic, (ii) the inverse square of the applied frequency, (iii) the inverse battery current in terms of the critical current, and (iv) the voltage amplitude of the inherent Josephson oscillations. For ω0≫ω ``classical'' detection proportional to curvature is obtained. For ω0∼ω resonance detection occurs, which depends to a considerable degree on fluctuations of the average contact voltage. These predictions are in reasonable agreement with experiments in which point-contact junctions were illuminated with klystron radiation at 10 and 90 GHz. Evidence is presented that the voltage fluctuations limiting the resonance response are the result of noise generated in the junction. Comparison of the noise-equivalent power expected from the simple model with measured results suggests that parasitic elements, such as shunt capacity, are not negligible at 90 GHz.
The capacitance of a Josephson tunnel junction is an important parameter, which determines its plasma frequency ωp and thus the energy level spacing in the quantum regime. When a microwave signal at the frequency of ω is applied to a current-biased junction in its zero-voltage state, the escape rate from this state is somehow enhanced. The enhancement is expected to go through a pronounced maximum when ωp=ω. Making use of such microwave generated resonant activation in the thermal regime, we have developed a time-resolved measurement scheme for determining the junction capacitance with an uncertainty of less than 2%.
Using Takanaka's theory of the zero-field dc-current steps of a Josephson tunnel junction, we have studied the effect of the junction QQQ factor on the shape of the current step near the first even-order resonant voltage $V=h\frac{{\ensuremath{\nu}}_{c}}{e}$, where ${\ensuremath{\nu}}_{c}$ is the frequency of the fundamental cavity mode. In addition, we have found that the effect of a magnetic field on the step height can be qualitatively explained by modifying Takanaka's theory to include a magnetic-field-dependent term.
One-third harmonic signals have been generated in the zero voltage state of a Josephson tunnel junction driven with a microwave current in the frequency range 8–20 GHz. The signal was as much as 50 dB above the noise level of the detector with a linewidth of less than 100 Hz. The junction parameters and microwave current were measured in situ in separate experiments. The subharmonic generation occurred for ranges of microwave current and frequency that were in reasonable agreement with the results of digital computer simulations.