Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Dynamic behavior of optically induced superconducting weak links

C. Vanneste, Alain Gilabert, P. Sibillot, Daniel B. Ostrowsky

Published Jun 1, 1981• 12 citations
Publisher

Abstract

We report experimental measurement of the dynamic response of optically induced superconducting weak links modulated at up to 1 GHz. Increasing the optical modulation depth from 7 to 70% as the frequency varies from low frequency to 30 MHz extinguishes the ac Josephson effect which is consistent with a calculated thermal response time of 150×10−9 sec.

DOI
10.1063/1.92190

Related papers

Optical Josephson effects using phase-conjugating mirrors: an analogy with superconductors

M. Blaauboer, Daan Lenstra, A. Lodder

Motivated by the analogy between a phase-conjugating mirror (PCM) and a superconductor, we search for optical counterparts of the well-known DC and AC Josephson effects. We show that in a system consisting of two PCM`s separated by vacuum an ,,optical supercurrent`` arises as a function of an applied phase difference between the PCM`s, which is the optical analogue of the DC supercurrent flowing in a superconducting weak link. The corresponding AC effect occurs when the two PCM`s are pumped by light of a different frequency, causing the phase difference to oscillate in time with the frequency difference.

Journal of Telecommunications and Information Technology•Jun 30, 2000•1 citation

Frequency Pulling and Mixing of Relaxation Oscillations in Superconducting Nanowires

Emily Toomey, Qingyuan Zhao, Adam N. McCaughan +1 more

The electromagnetic response of a superconducting nanowire exhibits relaxation oscillations, due to strong electrothermal nonlinearity. Resultant technology has been limited, though, by a lack of understanding of how the nonlinear behavior can be externally modulated. This study of electrothermal oscillations in superconducting nanowires uses microwave modulation to show that the oscillations mix with an external microwave drive, and lock to its frequency. This interaction is reminiscent of the ac Josephson effect, despite its thermal origin. Nanowire devices based on these phenomena could see use in microwave applications like frequency mixing and parametric amplification.

arXiv:1709.06598•Physical Review Applied•Jun 14, 2018•23 citations

Microwave induced nonlinearity in low frequency biased YBCO superconducting weak link rings (abstract)

Yue Feng Huang, A. Widom, C. Vittoria

We fabricated weak link rings using YBCO thin films deposited on the single crystal MgO substrate by laser ablation. The dimensions of the microbridges in the rings were between 0.5–1 μ in length and 500 Å–0.5 μ in width which were made by focused ion beam milling. We biased the ring by Faraday induction voltage while monitoring the voltage across the microbridge. The frequency of the input signal was varied between 10 kHz and 5 MHz. When we superimposed a microwave signal (2–18 GHz) to the ring, below the superconducting transition temperature (Tc), we observed strong nonlinearities in the voltage measured across the microbridge. The microwave frequency was chosen to be close to the ring natural electromagnetic resonance.

Journal of Applied Physics•May 15, 1993•1 citation

Superconducting weak links induced by optical guided waves

Alain Gilabert, Daniel B. Ostrowsky, C. Vanneste +2 more

Superconducting weak links have been created by locally weakening the superconductivity of a narrow thin-film lead strip via the evanescent field of an optical guided wave. Existence of the Josephson junction behavior of these links was confirmed by examination of their behavior in applied magnetic fields.

Applied Physics Letters•Nov 1, 1977•13 citations

Josephson effects in an alternating current biased transition edge sensor

Luciano G. Gottardi, Alexander G. Kozorezov, Hiroki Akamatsu +10 more

We report the experimental evidence of the ac Josephson effect in a transition edge sensor (TES) operating in a frequency domain multiplexer and biased by ac voltage at MHz frequencies. The effect is observed by measuring the non-linear impedance of the sensor. The TES is treated as a weakly linked superconducting system and within the resistively shunted junction model framework. We provide a full theoretical explanation of the results by finding the analytic solution of the non-inertial Langevian equation of the system and calculating the non-linear response of the detector to a large ac bias current in the presence of noise.

arXiv:1604.00549•Applied Physics Letters•Oct 20, 2014•31 citations

Detection mechanisms in superconducting point contacts at frequencies of 44 times the energy gap

Donald G. McDonald, F. R. Petersen, J. D. Cupp +2 more

We have performed mixing experiments with CO2 lasers in the 9 to 11 μm wavelength band using superconducting point contacts. The experiments involve difference frequencies ranging from 19 MHz to 106 GHz. The mixing mechanism definitely appears to require the superconducting state since the beat signal amplitude decreases by as much as 60 dB as the bath temperature is raised through the superconducting transition temperature. At least three conceptually distinguishable mechanisms may be involved in the observed response. These include : (1) a conventional Josephson response, (2) a thermally modulated Josephson response, and (3) a single particle tunneling response. The usual signature of a Josephson interaction is one or more current steps in the I-V curve. Steps, the first of which should be at 67 mV, are not observed in these experiments. However, we do not feel that is a definitive test for the mixing mechanism between two external sources at such high frequencies. In fact, Werthamer's theory of tunnel junctions predicts a large response for these experiments, a response as large as that from two X-band sources, for example. It should be noted, however, that the theory assumes the junction is maintained at a fixed low temperature and whether or not that is the case depends directly on the current density at the contact. Very little is known about the current density at the present time. These experiments emphasize a fact that is usually overlooked in Josephson junction mixing experiments with an external local oscillator. If the contact or tunneling region is sufficiently small, it may be thermally modulated at difference frequencies extending into the microwave range. This effect becomes more likely with increasing applied frequencies, particularly in the infrared. Theoretical modeling for the purpose of calculating ultimate sensitivities of these devices requires a detailed consideration of thermal effects. We fully expect large mixing signals from Josephson junctions even at optical frequencies if thermal effects do not prove to be a limitation.

Revue de Physique Appliquée•Jan 1, 1974•1 citation
We report experimental measurement of the dynamic response of optically induced superconducting weak links modulated at up to 1 GHz. Increasing the optical modulation depth from 7 to 70% as the frequency varies from low frequency to 30 MHz extinguishes the ac Josephson effect which is consistent with a calculated thermal response time of 150×10−9 sec.
Motivated by the analogy between a phase-conjugating mirror (PCM) and a superconductor, we search for optical counterparts of the well-known DC and AC Josephson effects. We show that in a system consisting of two PCM`s separated by vacuum an ,,optical supercurrent`` arises as a function of an applied phase difference between the PCM`s, which is the optical analogue of the DC supercurrent flowing in a superconducting weak link. The corresponding AC effect occurs when the two PCM`s are pumped by light of a different frequency, causing the phase difference to oscillate in time with the frequency difference.
The electromagnetic response of a superconducting nanowire exhibits relaxation oscillations, due to strong electrothermal nonlinearity. Resultant technology has been limited, though, by a lack of understanding of how the nonlinear behavior can be externally modulated. This study of electrothermal oscillations in superconducting nanowires uses microwave modulation to show that the oscillations mix with an external microwave drive, and lock to its frequency. This interaction is reminiscent of the ac Josephson effect, despite its thermal origin. Nanowire devices based on these phenomena could see use in microwave applications like frequency mixing and parametric amplification.
We fabricated weak link rings using YBCO thin films deposited on the single crystal MgO substrate by laser ablation. The dimensions of the microbridges in the rings were between 0.5–1 μ in length and 500 Å–0.5 μ in width which were made by focused ion beam milling. We biased the ring by Faraday induction voltage while monitoring the voltage across the microbridge. The frequency of the input signal was varied between 10 kHz and 5 MHz. When we superimposed a microwave signal (2–18 GHz) to the ring, below the superconducting transition temperature (Tc), we observed strong nonlinearities in the voltage measured across the microbridge. The microwave frequency was chosen to be close to the ring natural electromagnetic resonance.
We report the experimental evidence of the ac Josephson effect in a transition edge sensor (TES) operating in a frequency domain multiplexer and biased by ac voltage at MHz frequencies. The effect is observed by measuring the non-linear impedance of the sensor. The TES is treated as a weakly linked superconducting system and within the resistively shunted junction model framework. We provide a full theoretical explanation of the results by finding the analytic solution of the non-inertial Langevian equation of the system and calculating the non-linear response of the detector to a large ac bias current in the presence of noise.
We have performed mixing experiments with CO2 lasers in the 9 to 11 μm wavelength band using superconducting point contacts. The experiments involve difference frequencies ranging from 19 MHz to 106 GHz. The mixing mechanism definitely appears to require the superconducting state since the beat signal amplitude decreases by as much as 60 dB as the bath temperature is raised through the superconducting transition temperature. At least three conceptually distinguishable mechanisms may be involved in the observed response. These include : (1) a conventional Josephson response, (2) a thermally modulated Josephson response, and (3) a single particle tunneling response. The usual signature of a Josephson interaction is one or more current steps in the I-V curve. Steps, the first of which should be at 67 mV, are not observed in these experiments. However, we do not feel that is a definitive test for the mixing mechanism between two external sources at such high frequencies. In fact, Werthamer's theory of tunnel junctions predicts a large response for these experiments, a response as large as that from two X-band sources, for example. It should be noted, however, that the theory assumes the junction is maintained at a fixed low temperature and whether or not that is the case depends directly on the current density at the contact. Very little is known about the current density at the present time. These experiments emphasize a fact that is usually overlooked in Josephson junction mixing experiments with an external local oscillator. If the contact or tunneling region is sufficiently small, it may be thermally modulated at difference frequencies extending into the microwave range. This effect becomes more likely with increasing applied frequencies, particularly in the infrared. Theoretical modeling for the purpose of calculating ultimate sensitivities of these devices requires a detailed consideration of thermal effects. We fully expect large mixing signals from Josephson junctions even at optical frequencies if thermal effects do not prove to be a limitation.