Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

European Microwave Conference (EuMC)

Stable Standard Voltages of 1 VOLT By Improved Design of Superconducting MICCs with 1440 Jsephson Junctions

E. Vollmer, Johann Heyen Hinken, J. Niemeyer, Wolfgang Meier

Published Oct 1, 1985• 2 citations
Publisher

Abstract

The improved design of superconducting MMICs with 1440 Josephson tunnel-junctions is described. The junctions are integrated in four series arrays with a parallel rf supply and a series de circuit. MMICs designed for 70 and 90 GHz have been realized and tested. They produce stable quantized voltage steps up to 1.2 V. The long time stability of the 1 V step is greater than five hours. The output voltage was compared with the voltage of a Weston cell.

DOI
10.1109/euma.1985.333589

Related papers

Superconducting MMICs with 1474 Josephson Junctions Providing Standard Voltages up to 1.2 Volt

Johann Heyen Hinken, Jurgen Niemeyer, Richard L. Kautz

High precision dc voltage standards utilize microwave induced constant voltage steps occurring due to the ac Josephson effect. Existing standards can be considerably simplified and improved by using a large number of series-connected Josephson tunnel junctions which are operated in the zero current step mode. For this purpose superconducting millimeter wave integrated circuits (MMICs) have been designed, fabricated and tested. The circuits consist of a broadband taper between the waveguide and antipodal fin line, a transition to microstrip, the Josephson junction series, a well-matched load, and dc pads. Circuits with various numbers of junctions have been fabricated by photolithographic techniques and tested at 4.2 K in liquid helium. The version with 1474 junctions produced voltages up to 1.2 V when operated at 90 GHz.

European Microwave Conference (EuMC)•Oct 1, 1984•3 citations

Near-Zero Bias Arrays of Josephson Tunnel Junctions Providing Standard Voltages up to 1 V

Jurgen Niemeyer, Johann Heyen Hinken, Richard L. Kautz

Josephson voltage standards utilize microwave-induced constant voltage steps occurring due to the ac Josephson effect. Existing standards can be considerably simplified and their accuracy improved by using a large number of series-connected Josephson tunnel junctions which are operated in the zero current step mode. For this purpose superconducting millimeter wave integrated circuits have been designed, fabricated, and tested. The circuits consist of a broadband taper between the rectangular waveguide and the planar structure, the Josephson junction series, a well-matched load, and dc pads. Circuits with various numbers of junctions have been fabricated by photo-lithographic techniques and tested at 4.2 K in liquid helium. The version with 1474 junctions produced voltages up to 1.2 V when operated at 90 GHz.

IEEE Transactions on Instrumentation and Measurement•Jun 1, 1985•18 citations

Josephson voltage standard microwave circuits operating at 10 GHz

H.‐G. Meyer, Heiner Kohler, G. Wende +1 more

A new type of microwave circuit for the generation of frequency-scaled voltages is investigated. The circuit is designed as a superconducting microstrip line resonator and series arrays of Josephson tunnel junctions located within the rf current antinodes. The circuits are designed to obtain highly accurate voltages at low rf power level and low frequencies of about 10 GHz. For a resonator circuit with 432 junctions driven at about 10 GHz we have observed steps up to 0.25 V, the lifetime of which is about 20 minutes.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•3 citations

Josephson voltage standard microwave circuit driven at 10 GHz

H.‐G. Meyer, Heiner Kohler, G. Wende +5 more

We have investigated a new type of microwave circuit for the generation of frequency-scaled Josephson voltages useful for the representation of highly accurate reference voltages. The circuit consists of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current antinodes. The circuit is designed to operate at low frequencies of about 10 GHz to simplify the microwave techniques. At a resonator circuit with four Josephson junctions driven at 10.9 GHz we have obtained stable overlapping Shapiro steps up to 4.6 mV at a step width of about 70 µA. A more advanced double-resonator circuit with altogether 216 junctions allows to generate scaled reference voltages up to 0.16 V at steps of about 25 µA in width and at a microwave frequency of 11.1 GHz.

Journal de Physique IV (Proceedings)•Jun 1, 1994•0 citations

1- and 10-V series array Josephson voltage standards in Nb/Al2O3/Nb technology

R. Pöpel, J. Niemeyer, Rainer Fromknecht +2 more

Josephson arrays containing 2000 and 20 160 Nb/Al2O3/Nb tunnel junctions produce stable quantized voltage steps up to 1.5 and 14.5 V, respectively, with current amplitudes on the order of 100 μA. In precision measurements these voltage steps proved to be stable for typically 30 min. Fabricating the voltage standards with the help of the Nb/Al2O3/Nb technology results in a long durability.

Journal of Applied Physics•Oct 15, 1990•63 citations

Microwave-induced constant-voltage steps at one volt from a series array of Josephson junctions

J. Niemeyer, Johann Heyen Hinken, Richard L. Kautz

It is demonstrated that a series array of 1474 Josephson junctions can produce quantized voltages up to 1.2 V when driven by microwaves at 90 GHz in the absence of a dc bias. This result brings closer the possibility of a practical Josephson voltage standard at the 1-V level.

Applied Physics Letters•Aug 15, 1984•134 citations
The improved design of superconducting MMICs with 1440 Josephson tunnel-junctions is described. The junctions are integrated in four series arrays with a parallel rf supply and a series de circuit. MMICs designed for 70 and 90 GHz have been realized and tested. They produce stable quantized voltage steps up to 1.2 V. The long time stability of the 1 V step is greater than five hours. The output voltage was compared with the voltage of a Weston cell.
High precision dc voltage standards utilize microwave induced constant voltage steps occurring due to the ac Josephson effect. Existing standards can be considerably simplified and improved by using a large number of series-connected Josephson tunnel junctions which are operated in the zero current step mode. For this purpose superconducting millimeter wave integrated circuits (MMICs) have been designed, fabricated and tested. The circuits consist of a broadband taper between the waveguide and antipodal fin line, a transition to microstrip, the Josephson junction series, a well-matched load, and dc pads. Circuits with various numbers of junctions have been fabricated by photolithographic techniques and tested at 4.2 K in liquid helium. The version with 1474 junctions produced voltages up to 1.2 V when operated at 90 GHz.
Josephson voltage standards utilize microwave-induced constant voltage steps occurring due to the ac Josephson effect. Existing standards can be considerably simplified and their accuracy improved by using a large number of series-connected Josephson tunnel junctions which are operated in the zero current step mode. For this purpose superconducting millimeter wave integrated circuits have been designed, fabricated, and tested. The circuits consist of a broadband taper between the rectangular waveguide and the planar structure, the Josephson junction series, a well-matched load, and dc pads. Circuits with various numbers of junctions have been fabricated by photo-lithographic techniques and tested at 4.2 K in liquid helium. The version with 1474 junctions produced voltages up to 1.2 V when operated at 90 GHz.
A new type of microwave circuit for the generation of frequency-scaled voltages is investigated. The circuit is designed as a superconducting microstrip line resonator and series arrays of Josephson tunnel junctions located within the rf current antinodes. The circuits are designed to obtain highly accurate voltages at low rf power level and low frequencies of about 10 GHz. For a resonator circuit with 432 junctions driven at about 10 GHz we have observed steps up to 0.25 V, the lifetime of which is about 20 minutes.>
We have investigated a new type of microwave circuit for the generation of frequency-scaled Josephson voltages useful for the representation of highly accurate reference voltages. The circuit consists of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current antinodes. The circuit is designed to operate at low frequencies of about 10 GHz to simplify the microwave techniques. At a resonator circuit with four Josephson junctions driven at 10.9 GHz we have obtained stable overlapping Shapiro steps up to 4.6 mV at a step width of about 70 µA. A more advanced double-resonator circuit with altogether 216 junctions allows to generate scaled reference voltages up to 0.16 V at steps of about 25 µA in width and at a microwave frequency of 11.1 GHz.