Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Introduction To Bistable Optical Devices For Optical Signal Processing

E. Garmire

Published Apr 25, 1980• 3 citations
Publisher

Abstract

This paper addresses the concept of active optical processing, in which signals are processed due to a nonlinear transfer function (light output as a function of light input). The particular active device considered here is a bistable optical device (BOD), which typically has transfer curves such as those shown in Fig. 1. Devices whici have transfer functions such as these can be used fc,-- signal enhancement, optical logic, memories, and switching. The aim of developing active optical processing is to achieve high speed all-optical operation, which is not limited by electron transit time considerations. An all-optical processor should have psec response times. In addition, the all-optical nature means freedom from emi, rfi, cross-talk and security, which are also characteristics of optical fibers.

DOI
10.1117/12.958504

Related papers

Optical Bistability And Switching By Non Inear Waveguiding In Semiconductor Lasers And Laser Amplifiers

John Gerard McInerney, Yuan Li, Theodore C. Salvi +1 more

Bistable optical devices (BODs) are interesting for optical switching, limiting, memory, signal conditioning and logic [1]. Semiconductor-based BODs are especially promising because their large nonlinearities should permit development of compact, rugged and efficient systems. Here we concentrate on active semiconductor BODs and switches, that is those which have internal gain, such as injection lasers and amplifiers.

Digest on Nonlinear Optics: Materials, Phenomena and Devices•Jan 1, 1990•1 citation

Optical Bistability

Guang S. He

When the output parameter of an optical device could be a multivalued function of the input parameter, this device can be working in an optical bistable status. The most typical optical bistable device is a Fabry–Perot cavity containing a nonlinear optical medium, the refractive index of which depends on the light intensity. Upon the action of an intense input optical beam, the transmitted (or reflected) intensity of this device may exhibit a nonlinear response to the incident light intensity variation and, especially under appropriate working conditions, the characteristic output/input curve may manifest a single (or multiple) hysteresis loop(s). Such type of optical bistable device can be used as an optical differential amplifier, optical switch, optical limiter, optical clipper, optical discriminator, or an optical memory element, depending on the chosen nonlinear medium and operation conditions.

Oxford University Press eBooks•Oct 30, 2014•1 citation

Signal Processing With A Nonlinear Fabry-Perot

E. Garmire

In this paper we consider the nonlinear Fabry-Perot and its applications to optical signal and image processing. This paper addresses the signal processing aspects of a nonlinear Fabry-Perot interferometer with emphasis on image processing. The device geometry is shown in Figure 1. A thin nonlinear medium, whose refractive index is a function of the light intensity inside the Fabry-Perot is sandwiched between two plane parallel mirrors. The output as a function of input is shown in Fig. 2, for two different values of the difference between the Fabry-Perot low intensity resonance and the incident wavelength. The bistable curve in 2a is the origin of the term optical bistability and makes possible an optical memory, in which the output is a function of the history of the device. The Figure 2b represents a typical nonlinear transfer curve which may be used for signal processing. It can be seen that small changes in the input intensity Ic make large changes in the output intensity.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 29, 1981•5 citations

Optical Bistability For Optical Signal Processing And Computing

Nasser N. Peyghambarian, H. M. Gibbs

In this paper we present the basic principles of optical bistability and summarize the current advances in semiconductor optical switching, with emphasis on recent results in GaAs, CuCI, InAs, InSb, CdS, ZnS, and ZnSe etalons. These devices have great potential for applications involving optical signal processing and computing. As an example, we discuss the use of arrays of bistable devices for parallel optical processing and for addressable spatial light modulators. The use of nonlinear etalons as optical gates is also illustrated. To date, GaAs devices have shown the most favorable characteristics for practical applications. They operate at room temperature with a few milliwatts of power using a laser diode as the only light source. Quasi-cw operation and optical fiber signal regeneration have also been demonstrated. A GaAs NOR gate operates in 1 ps with <3 pJ incident energy; this, of course, implies a 1 ps switch-on time for a bistable etalon.

Optical Engineering•Feb 1, 1985•52 citations

Bistable Optoelectronic Devices

John Gerard McInerney

We present a review of optical bistability in active and passive optoelectronic devices, with particular reference to switching speeds and powers. The large resonant nonlinearities available near the bandgaps of semiconductors may be utilized to develop bistable devices operating at low powers and high speeds. Passive devices are driven by external optical sources and include nonlinear etalons, nonlinear interfaces, self-focusing configurations and electro-optic modulators with electrical feedback. Active devices include injection lasers and superluminescent amplifiers. Potential advantages of active devices include speed, gain, sensitivity and the ability to drive other devices, but complexity and high power dissipation may limit their use in applications requiring high density.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 1, 1987•5 citations

Optical Bistability

The study of optical bistability and bistable devices is a special topic of nonlinear optics. In this chapter, we focus our discussion only on the most typical optical bistable configuration, i.e. a Fubry–Perot (F–P) etalon containing a nonlinear optical medium, the refractive-index of which depends on the light intensity. Under the action of an intense coherent optical beam, this device may exhibit a nonlinear response to the incident beam in the sense that the transmitted intensity is a nonlinear function of the incident intensity. Based on such a nonlinear response this type of device can be used as an optical differential amplifier, optical switch, optical limiter, optical clipper, optical discriminator, or an optical memory element depending on the chosen nonlinear medium and operation conditions.

WORLD SCIENTIFIC eBooks•Dec 14, 2017•0 citations
This paper addresses the concept of active optical processing, in which signals are processed due to a nonlinear transfer function (light output as a function of light input). The particular active device considered here is a bistable optical device (BOD), which typically has transfer curves such as those shown in Fig. 1. Devices whici have transfer functions such as these can be used fc,-- signal enhancement, optical logic, memories, and switching. The aim of developing active optical processing is to achieve high speed all-optical operation, which is not limited by electron transit time considerations. An all-optical processor should have psec response times. In addition, the all-optical nature means freedom from emi, rfi, cross-talk and security, which are also characteristics of optical fibers.
When the output parameter of an optical device could be a multivalued function of the input parameter, this device can be working in an optical bistable status. The most typical optical bistable device is a Fabry–Perot cavity containing a nonlinear optical medium, the refractive index of which depends on the light intensity. Upon the action of an intense input optical beam, the transmitted (or reflected) intensity of this device may exhibit a nonlinear response to the incident light intensity variation and, especially under appropriate working conditions, the characteristic output/input curve may manifest a single (or multiple) hysteresis loop(s). Such type of optical bistable device can be used as an optical differential amplifier, optical switch, optical limiter, optical clipper, optical discriminator, or an optical memory element, depending on the chosen nonlinear medium and operation conditions.
In this paper we consider the nonlinear Fabry-Perot and its applications to optical signal and image processing. This paper addresses the signal processing aspects of a nonlinear Fabry-Perot interferometer with emphasis on image processing. The device geometry is shown in Figure 1. A thin nonlinear medium, whose refractive index is a function of the light intensity inside the Fabry-Perot is sandwiched between two plane parallel mirrors. The output as a function of input is shown in Fig. 2, for two different values of the difference between the Fabry-Perot low intensity resonance and the incident wavelength. The bistable curve in 2a is the origin of the term optical bistability and makes possible an optical memory, in which the output is a function of the history of the device. The Figure 2b represents a typical nonlinear transfer curve which may be used for signal processing. It can be seen that small changes in the input intensity Ic make large changes in the output intensity.
In this paper we present the basic principles of optical bistability and summarize the current advances in semiconductor optical switching, with emphasis on recent results in GaAs, CuCI, InAs, InSb, CdS, ZnS, and ZnSe etalons. These devices have great potential for applications involving optical signal processing and computing. As an example, we discuss the use of arrays of bistable devices for parallel optical processing and for addressable spatial light modulators. The use of nonlinear etalons as optical gates is also illustrated. To date, GaAs devices have shown the most favorable characteristics for practical applications. They operate at room temperature with a few milliwatts of power using a laser diode as the only light source. Quasi-cw operation and optical fiber signal regeneration have also been demonstrated. A GaAs NOR gate operates in 1 ps with <3 pJ incident energy; this, of course, implies a 1 ps switch-on time for a bistable etalon.
We present a review of optical bistability in active and passive optoelectronic devices, with particular reference to switching speeds and powers. The large resonant nonlinearities available near the bandgaps of semiconductors may be utilized to develop bistable devices operating at low powers and high speeds. Passive devices are driven by external optical sources and include nonlinear etalons, nonlinear interfaces, self-focusing configurations and electro-optic modulators with electrical feedback. Active devices include injection lasers and superluminescent amplifiers. Potential advantages of active devices include speed, gain, sensitivity and the ability to drive other devices, but complexity and high power dissipation may limit their use in applications requiring high density.
The study of optical bistability and bistable devices is a special topic of nonlinear optics. In this chapter, we focus our discussion only on the most typical optical bistable configuration, i.e. a Fubry–Perot (F–P) etalon containing a nonlinear optical medium, the refractive-index of which depends on the light intensity. Under the action of an intense coherent optical beam, this device may exhibit a nonlinear response to the incident beam in the sense that the transmitted intensity is a nonlinear function of the incident intensity. Based on such a nonlinear response this type of device can be used as an optical differential amplifier, optical switch, optical limiter, optical clipper, optical discriminator, or an optical memory element depending on the chosen nonlinear medium and operation conditions.