Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Magneto-optical detection of single flux quantum signals in superconducting quantum interference device

Hironaru Murakami, Ryohei Kitamura, Iwao Kawayama, Masayoshi Tonouchi

Published Nov 9, 2009• 0 citations
Publisher

Abstract

The properties of an YBa2Cu3O7−d superconducting quantum interference device (SQUID) have been evaluated magneto-optically and electrically. It was found that the operating characteristics of the SQUID observed by means of the magneto-optical (MO) method show a good consistency with those measured by the electrical method. Furthermore, we have succeeded in the MO detection of local magnetic signals corresponding to the single flux quantum pulses generated in the SQUID loop applied with an external pulsed magnetic field. These results indicate that the MO probe has the potential to be applied to an optical output interface for superconducting magnetic flux devices.

DOI
10.1063/1.3262957

Related papers

Nonlocal superconducting quantum interference device

Taewan Noh, Andrew Kindseth, Venkat Chandrasekhar

Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.

arXiv:2011.06667•Physical review. B./Physical review. B•Aug 4, 2021•13 citations

Store–restore operation of flux quanta in coplanar type high Tc superconductive quantum interference devices

Hiroyuki Fuke, Kazuo Saitoh, Tadashi Utagawa +1 more

For a superconductive quantum interference device (SQUID) with rather large loop inductance for a single flux quantum, store–restore operation of flux quanta has been examined by external current pulses. To sense the stored flux quanta, the device includes another directly coupled SQUID as a magnetometer. Both of the coplanar type dc SQUIDs have been composed of Josephson junctions made by the narrow-focused ion beam irradiation technique in single-layer NdBa2Cu3O7−δ superconducting films. The SQUID has a critical current of 375 μA and an inductive parameter (βL) of 32. The number of stored flux quanta is controlled by the pulse signal height and the input terminal, but not by the number of pulses.

Journal of Applied Physics•Sep 1, 1998•1 citation

Inductance mode characteristics of a ceramic YBa2Cu3O7−x radio-frequency superconducting quantum interference device at 77 K

Evgeni V. Il’ichev, A. V. Andreev, Christian S. Jacobsen

Experimental results on some radio-frequency superconducting quantum interference device (rf-SQUID) signal properties are presented. The quantum interferometer was made of ceramic YBa2Cu3O7−x and was due to a low critical current operated in the inductance or nonhysteretic mode. With bias current as reference, amplitude variation, and phase shift of the voltage over the tank circuit coupled to the SQUID were measured simultaneously. It is shown that there is qualitative agreement between calculations based on the resistivity shunted junction model and the data. Moreover, using phase detection, signal instabilities predicted for the rf-SQUID inductance mode were observed. These signal instabilities may be exploited to enhance the transfer coefficient for measured flux-to-output signal.

Journal of Applied Physics•Sep 1, 1993•1 citation

Performance of nano superconducting quantum interference devices for small spin cluster detection

C. Granata, Antonio Vettoliere, Pravin S. Walke +2 more

In the present paper, performance of nano-superconducting-quantum-interference devices (SQUIDs) has been investigated in view of their employment in the detection of small spin populations. The analysis has been focused on nano-SQUID sensors having a square loop with a side length of 200 nm. We calculate the spin sensitivity and the magnetic response relative to the single Bohr magneton (single spin), as a function of its position within the SQUID hole. The results show that the SQUID response depends strongly on the spin position; the ratio between the spin sensitivity evaluated in the center of the loop and the minimum one is as high as a factor of 3 for a spin at a reasonable distance z′ of 10 nm from the SQUID plane. Furthermore, the magnetic flux due to several hundred of spins has been evaluated by considering different random spin distributions within the SQUID hole. Due to the both nonuniform SQUID response and the random distribution process, the results show a statistical uncertainty which has been evaluated as a function of the spin number. The estimated informations are very useful to optimize the sensor performance in view of the most nanomagnetism applications.

Journal of Applied Physics•Jul 15, 2009•26 citations

Detection of Far-Field Radio-Frequency Signals by Niobium Superconducting Quantum Interference Device Arrays

Marcio C. de Andrade, Anna Leese de Escobar, B. J. Taylor +7 more

The capability of an all-niobium superconducting quantum interference device (SQUID) array to operate as an electrically small antenna capable of detecting radio frequency from distant sources was demonstrated. The measurements were performed in three different arrays, with each array consisting of 2400 identical cells. The intrinsic broadband characteristics of the device were confirmed by the flat frequency response of the ratio of the output and input voltages (the S21 parameter) of the array between 300 kHz and 1 GHz. Setting the device to its optimal operating parameters allowed the detection of signals from local frequency-modulation stations.

IEEE Transactions on Applied Superconductivity•Aug 31, 2015•32 citations

Magneto-optical modulator for the superconducting digital output interface

Roberto Rey-de-Castro

Josephson-junction-based low temperature rapid single flux quantum (RSFQ) superconducting electronics is already a mature technology, which is expected to perform at speeds exceeding 100 GHz [1]. However, the RSFQ technology still lacks a fast enough output interface between its operating circuit temperature T = 4.2 K and the room temperature electronic environment. RSFQ circuits work at liquid helium temperatures and the direct interconnection of these circuits and room temperature circuits using, e.g., copper transmission lines would consume too much of the cooling power [2]. To solve this problem a magneto-optical (MO) output interface has been proposed [3], in which the output current pulse from the RSFQ circuit is converted into an optical pulse and delivered to room temperature readout circuitry via an optical fiber.

Opto-Canada: SPIE Regional Meeting on Optoelectronics, Photonics, and Imaging•Aug 29, 2017•1 citation
The properties of an YBa2Cu3O7−d superconducting quantum interference device (SQUID) have been evaluated magneto-optically and electrically. It was found that the operating characteristics of the SQUID observed by means of the magneto-optical (MO) method show a good consistency with those measured by the electrical method. Furthermore, we have succeeded in the MO detection of local magnetic signals corresponding to the single flux quantum pulses generated in the SQUID loop applied with an external pulsed magnetic field. These results indicate that the MO probe has the potential to be applied to an optical output interface for superconducting magnetic flux devices.
Superconducting quantum interference devices (SQUIDs) that incorporate two superconductor/insulator/superconductor (SIS) Josephson junctions in a closed loop form the core of some of the most sensitive detectors of magnetic and electric fields currently available. SQUIDs in these applications are typically operated with a finite voltage which generates microwave radiation through the ac Josephson effect. This radiation may impact the system being measured. We describe here a SQUID in which the Josephson junctions are formed from strips of normal metal (N) in good electrical contact with the superconductor (S). Such SNS SQUIDs can be operated under a finite voltage bias with performance comparable or potentially better than conventional SIS SQUIDs. However, they also permit a mode of operation that is based on the unusual interplay of quasiparticle currents and supercurrents in the normal metal of the Josephson junction. The method allows measurements of the flux dependence of the critical current of the SNS SQUID without applying a finite voltage bias across the SNS junction, enabling sensitive flux detection without generating microwave radiation.
For a superconductive quantum interference device (SQUID) with rather large loop inductance for a single flux quantum, store–restore operation of flux quanta has been examined by external current pulses. To sense the stored flux quanta, the device includes another directly coupled SQUID as a magnetometer. Both of the coplanar type dc SQUIDs have been composed of Josephson junctions made by the narrow-focused ion beam irradiation technique in single-layer NdBa2Cu3O7−δ superconducting films. The SQUID has a critical current of 375 μA and an inductive parameter (βL) of 32. The number of stored flux quanta is controlled by the pulse signal height and the input terminal, but not by the number of pulses.
Experimental results on some radio-frequency superconducting quantum interference device (rf-SQUID) signal properties are presented. The quantum interferometer was made of ceramic YBa2Cu3O7−x and was due to a low critical current operated in the inductance or nonhysteretic mode. With bias current as reference, amplitude variation, and phase shift of the voltage over the tank circuit coupled to the SQUID were measured simultaneously. It is shown that there is qualitative agreement between calculations based on the resistivity shunted junction model and the data. Moreover, using phase detection, signal instabilities predicted for the rf-SQUID inductance mode were observed. These signal instabilities may be exploited to enhance the transfer coefficient for measured flux-to-output signal.
In the present paper, performance of nano-superconducting-quantum-interference devices (SQUIDs) has been investigated in view of their employment in the detection of small spin populations. The analysis has been focused on nano-SQUID sensors having a square loop with a side length of 200 nm. We calculate the spin sensitivity and the magnetic response relative to the single Bohr magneton (single spin), as a function of its position within the SQUID hole. The results show that the SQUID response depends strongly on the spin position; the ratio between the spin sensitivity evaluated in the center of the loop and the minimum one is as high as a factor of 3 for a spin at a reasonable distance z′ of 10 nm from the SQUID plane. Furthermore, the magnetic flux due to several hundred of spins has been evaluated by considering different random spin distributions within the SQUID hole. Due to the both nonuniform SQUID response and the random distribution process, the results show a statistical uncertainty which has been evaluated as a function of the spin number. The estimated informations are very useful to optimize the sensor performance in view of the most nanomagnetism applications.
The capability of an all-niobium superconducting quantum interference device (SQUID) array to operate as an electrically small antenna capable of detecting radio frequency from distant sources was demonstrated. The measurements were performed in three different arrays, with each array consisting of 2400 identical cells. The intrinsic broadband characteristics of the device were confirmed by the flat frequency response of the ratio of the output and input voltages (the S21 parameter) of the array between 300 kHz and 1 GHz. Setting the device to its optimal operating parameters allowed the detection of signals from local frequency-modulation stations.
Josephson-junction-based low temperature rapid single flux quantum (RSFQ) superconducting electronics is already a mature technology, which is expected to perform at speeds exceeding 100 GHz [1]. However, the RSFQ technology still lacks a fast enough output interface between its operating circuit temperature T = 4.2 K and the room temperature electronic environment. RSFQ circuits work at liquid helium temperatures and the direct interconnection of these circuits and room temperature circuits using, e.g., copper transmission lines would consume too much of the cooling power [2]. To solve this problem a magneto-optical (MO) output interface has been proposed [3], in which the output current pulse from the RSFQ circuit is converted into an optical pulse and delivered to room temperature readout circuitry via an optical fiber.