Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

A slit-type atom deflector with near-field light

Kouki Totsuka, Haruhiko Ito, Kiichi Suzuki, Kazuhiro Yamamoto, Motoichi Ohtsu, Takashi Yatsui

Published Mar 6, 2003• 17 citations
Publisher

Abstract

We developed a near-field optical deflector for precise direction control of atomic motion using a dipole force. The blue-detuned, near-field light used to deflect atoms was generated near the edge of a 100-nm-wide slit and had a spatial distribution of 126 nm at a distance of 10 nm from the top edge. The deflection angle for a Rb atom was a function of light intensity, frequency detuning, and atomic velocity.

DOI
10.1063/1.1558222

Related papers

Deflecting, focusing, and funnelling atoms by near-field light

Hajime Ito, Kazuo Yamamoto, Akifumi Takamizawa +2 more

We describe atom deflection with a slit-type deflector as an elemental technique of precise atom control using near-field light. In the demonstration experiments, cold Rb atoms deflected by repulsive near-field light induced in a 200?nm-wide slit are detected by means of two-step photoionization. Then, we consider a near-field-light lens of atomic de Broglie waves by developing the atom deflector. The feasibility of nanofocusing is shown by numerical analyses with Fourier atom optics. Finally, we describe atom funnels with evanescent light to generate a cold atomic beam required for atom manipulation using nanometric near-field light. The flux intensity of cold Rb atoms outputted from a 240??m outlet is estimated to be 7.5 ? 107?atom?cm?2?s?1 at a blue detuning of 1.2?GHz. In order to increase the flux intensity to 1012?atom?cm?2?s?1, we develop a Si-made funnel with a micron-sized outlet.

Journal of Optics A Pure and Applied Optics•Mar 23, 2006•7 citations

Atom deflector with optical near fields

K. Totsuka, Kazunobu Yamada, Hajime Ito +1 more

Summary form only given. For atom-deflection experiments, we have previously fabricated a slit-type atom detector with a spatial resolution of 96 nm and a detection efficiency of more than 10% for slow Rb atoms. We are planning to use the detector. In this paper, we report a slit-type atom deflector for Rb atoms. The deflector has a structure suitable for the use in combination with the slit-type detector.

Quantum Electronics and Laser Science Conference•Jun 25, 2003•1 citation

Precise control of atoms with optical near fields: deflection and trap

Haruhiko Ito, Akifumi Takamizawa, H. Tanioka +1 more

We present a new scheme of atom manipulation by means of a sharpened optical fiber with near-field light. In particular, we discuss the feasibility of deflecting and trapping Rb atoms. The optical potential produced by the dipole force is estimated from numerical calculations based on the Yukawa-type intensity distribution. We show that a slow Rb atom can be deflected at a large deflection angle. A static atom trap can be made near the tip of a sharpened fiber. A cold Rb atom is captured at the minimum of the trap potential composed of the repulsive optical potential and the attractive van der Waals potential. A spatial intensity distribution of an optical near-field produced near the tip of a protrusion-type fiber is measured in the fiber-to-probe configuration with a shear-force technique. We also describe an atom funnel to form a cold atomic beam required for the near-field light manipulation.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 22, 1999•3 citations

A slit-type near-field optical detector for neutral atoms with high sensitivity and nanometric resolution

K. Totsuka, Hajime Ito, Tatsurou Kawamura +2 more

Summary form only given. We have proposed deflection by an optical near field on a fiber probe to control atoms with high spatial accuracy. In this case, the deflection angle is estimated to be 0.1 degree for a Rb atom with an incident velocity of 10 m/s. It leads to the deviation of 10 /spl mu/m from the incident axis at 1 cm. in the downstream. To detect the deflected atoms with an accuracy of 1%, we need the spatial resolution of 100 nm. However, a commercial detector such as MCP has a low resolution of 50 /spl mu/m at most and the highest resolution that has been reported is 1 /spl mu/m to our knowledge. In addition, these are applied to metastable atoms and have less detection efficiency for the ground state atoms we manipulate. For drastic improvement, we present here a slit-type atom detector with a nanometric lateral resolution. Since the number of atoms deflected by the optical near field is very small, it is important to detect atoms with high efficiency. For this purpose, we use photoionization with two-color optical near fields.

Quantum Electronics and Laser Science Conference•Nov 13, 2002•0 citations

Evaluation of near-field optical potentials on a nanometric sharpened fiber probe for atom trapping

K. Totsuka, H. Tanioka, Hajime Ito +1 more

Summary form only given. Recently, atom manipulation by using optical near fields has been attracting a lot of interests. Optical near field can be localized in a nanometric region, being free from the diffraction limit in contrast to propagation light. The intensity distribution of optical near field decays rapidly as an exponential-like function. Because such a spatially inhomogeneous light field can affect the resonant force on an atom (the so called dipole force), the optical near field produces the strong dipole force. Using the dipole force of the optical near field, we can expect to manipulate an atom with high spatial accuracy. Moreover, due to the resonant character of the dipole force, we can manipulate an atom species- and state-selectively. The optical near field localized in a nanometric region can be generated on the tip of a sharpened fiber-probe. This kind of fiber probe can be used for deflection of the atomic motion, and then trapping of an atom. To this end, it is very important to fabricate the fiber probe suitable for the atoms used. In this case, we must consider several parameters: a size and a shape of the tip, light intensity, frequency detuning, etc. In order to examine the optimal conditions for the fabrication, we measured and evaluated the optical near-field intensity distribution of the fiber-probe.

•May 7, 2000•0 citations

High Spatial Resolution Atom Detector with Two-Color Optical Near Fields

Kouki Totsuka, Haruhiko Ito, Tomoto Kawamura +1 more

We describe a slit-type detector for ground-state atoms with nanometer optical near fields. The detector with a slit width of 70 nm and a slit length of 100 µm is fabricated by processing a silicon-on-insulator wafer with photolithography and anisotropic etching. Measurement with a fiber probe of the intensity distribution on the slit reveals that the spatial resolution is 96 nm. Rubidium atoms can be selectively detected by means of two-step photoionization. The detection efficiency is estimated at 25% for Rb atoms with a mean velocity of 10 m/s. The atom detector can be used for atom deflection experiments with a fiber probe.

Japanese Journal of Applied Physics•Mar 15, 2002•19 citations
We developed a near-field optical deflector for precise direction control of atomic motion using a dipole force. The blue-detuned, near-field light used to deflect atoms was generated near the edge of a 100-nm-wide slit and had a spatial distribution of 126 nm at a distance of 10 nm from the top edge. The deflection angle for a Rb atom was a function of light intensity, frequency detuning, and atomic velocity.
We describe atom deflection with a slit-type deflector as an elemental technique of precise atom control using near-field light. In the demonstration experiments, cold Rb atoms deflected by repulsive near-field light induced in a 200?nm-wide slit are detected by means of two-step photoionization. Then, we consider a near-field-light lens of atomic de Broglie waves by developing the atom deflector. The feasibility of nanofocusing is shown by numerical analyses with Fourier atom optics. Finally, we describe atom funnels with evanescent light to generate a cold atomic beam required for atom manipulation using nanometric near-field light. The flux intensity of cold Rb atoms outputted from a 240??m outlet is estimated to be 7.5 ? 107?atom?cm?2?s?1 at a blue detuning of 1.2?GHz. In order to increase the flux intensity to 1012?atom?cm?2?s?1, we develop a Si-made funnel with a micron-sized outlet.
We present a new scheme of atom manipulation by means of a sharpened optical fiber with near-field light. In particular, we discuss the feasibility of deflecting and trapping Rb atoms. The optical potential produced by the dipole force is estimated from numerical calculations based on the Yukawa-type intensity distribution. We show that a slow Rb atom can be deflected at a large deflection angle. A static atom trap can be made near the tip of a sharpened fiber. A cold Rb atom is captured at the minimum of the trap potential composed of the repulsive optical potential and the attractive van der Waals potential. A spatial intensity distribution of an optical near-field produced near the tip of a protrusion-type fiber is measured in the fiber-to-probe configuration with a shear-force technique. We also describe an atom funnel to form a cold atomic beam required for the near-field light manipulation.
Summary form only given. We have proposed deflection by an optical near field on a fiber probe to control atoms with high spatial accuracy. In this case, the deflection angle is estimated to be 0.1 degree for a Rb atom with an incident velocity of 10 m/s. It leads to the deviation of 10 /spl mu/m from the incident axis at 1 cm. in the downstream. To detect the deflected atoms with an accuracy of 1%, we need the spatial resolution of 100 nm. However, a commercial detector such as MCP has a low resolution of 50 /spl mu/m at most and the highest resolution that has been reported is 1 /spl mu/m to our knowledge. In addition, these are applied to metastable atoms and have less detection efficiency for the ground state atoms we manipulate. For drastic improvement, we present here a slit-type atom detector with a nanometric lateral resolution. Since the number of atoms deflected by the optical near field is very small, it is important to detect atoms with high efficiency. For this purpose, we use photoionization with two-color optical near fields.
Summary form only given. Recently, atom manipulation by using optical near fields has been attracting a lot of interests. Optical near field can be localized in a nanometric region, being free from the diffraction limit in contrast to propagation light. The intensity distribution of optical near field decays rapidly as an exponential-like function. Because such a spatially inhomogeneous light field can affect the resonant force on an atom (the so called dipole force), the optical near field produces the strong dipole force. Using the dipole force of the optical near field, we can expect to manipulate an atom with high spatial accuracy. Moreover, due to the resonant character of the dipole force, we can manipulate an atom species- and state-selectively. The optical near field localized in a nanometric region can be generated on the tip of a sharpened fiber-probe. This kind of fiber probe can be used for deflection of the atomic motion, and then trapping of an atom. To this end, it is very important to fabricate the fiber probe suitable for the atoms used. In this case, we must consider several parameters: a size and a shape of the tip, light intensity, frequency detuning, etc. In order to examine the optimal conditions for the fabrication, we measured and evaluated the optical near-field intensity distribution of the fiber-probe.
We describe a slit-type detector for ground-state atoms with nanometer optical near fields. The detector with a slit width of 70 nm and a slit length of 100 µm is fabricated by processing a silicon-on-insulator wafer with photolithography and anisotropic etching. Measurement with a fiber probe of the intensity distribution on the slit reveals that the spatial resolution is 96 nm. Rubidium atoms can be selectively detected by means of two-step photoionization. The detection efficiency is estimated at 25% for Rb atoms with a mean velocity of 10 m/s. The atom detector can be used for atom deflection experiments with a fiber probe.