An interferometer operating purely on the geometric phase is described. The optical paths traversed by the two beams in this interferometer are always equal, and the phase difference between the beams is varied by operating on the geometric phase
The wave function of a quantum system may acquire an additional phase factor (the geometric phase), when its parameters undergo a cyclic change. An optical manifestation of the geometric phase is the change in the phase of a light wave produced when its state of polarization is taken around a circuit on the Poincare sphere. This phase change can be verified by interferometric measurements. We describe an interferometer in which the two beams traverse the same path in opposite directions, so that their optical paths are always equal, and the phase difference between them is varied by operating on the geometric phase. Measurements made with this interferometer, at a light level at which the probability of more than one photon being present simultaneously in the interferometer was negligibly small, confirmed that the interference effects observed due to the geometric phase persist down to the single photon level.
Nonlinear interferometers include a nonlinear optical medium that is situated to produce a conjugate optical beam in response to a pump beam and a probe beam. The pump, probe, and conjugate beams propagate displaced from each other along a common optical path. One of the beams is selectively phase shifted, and the beams are then returned to the nonlinear medium, with the selectively phase shift beam phase shifted again. The nonlinear medium provides phase sensitive gain to at least one of the probe or conjugate beams, and the amplified beam is detected to provide an estimate of the phase shift.