Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

National Conference on Communications

Power allocation strategy using node cooperation for transmit power minimization under correlated fading

Sarbani Ghose, Ranjan Bose

Published Feb 1, 2013• 2 citations
Publisher

Abstract

Achieving security at the physical layer in the presence of eavesdropper has always remained a critical issue under adverse channel conditions. The present scenario has relay with multiple antenna to combat channel effects. We have designed system model so that the nodes cooperate among themselves for the available power, with the aim to minimize the total transmit power, under a secrecy rate constraint. Here the relay sends out a jamming signal in order to confuse the eavesdropper. We assume correlated fading in the relay channels. The channel is modeled taking into account the large scale fading and small scale fading as well, through inclusion of path loss exponent and Rayleigh fading effects. The optimal power requirements for the source and the jammers are determined subject to the constraint of secrecy rate. The power allocation also depends upon path loss exponent, distance and fading parameters. The corresponding relaying regions have been plotted for real, equal and real, unequal roots of source power. Real, equal roots of source power are independent of position of relay. From the simulations we observe that the region expands when relays are away from the source.

DOI
10.1109/ncc.2013.6487960

Related papers

Cooperative jamming for wireless physical layer security

Lun Dong, Zhu Han, Athina P. Petropulu +1 more

Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.

arXiv:0907.4996•IEEE Statistical Signal Processing Workshop (SSP)•Aug 1, 2009•128 citations

Improving Wireless Physical Layer Security via Cooperating Relays

Lun Dong, Zhu Han, Athina P. Petropulu +1 more

Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.

IEEE Transactions on Signal Processing•Dec 11, 2009•1,355 citations

Improving Secrecy with Nearly Collinear Main and Wiretap Channels via a Cooperative Jamming Relay

Shuai Han, Sai Xu, Weixiao Meng +1 more

In physical layer security (PHY-security), the frequently observed high correlation between the main and wiretap channels can cause a significant loss of secrecy. This paper investigates a slow fading scenario, where a transmitter (Alice) sends a confidential message to a legitimate receiver (Bob) while a passive eavesdropper (Eve) attempts to decode the message from its received signal. It is assumed that Alice is equipped with multiple antennas while Bob and Eve each have a single antenna (i.e., a MISOSE system). In a MISOSE system, high correlation results in nearly collinear main and wiretap channel vectors, which help Eve to see and intercept confidential information. Unfortunately, the signal processing techniques at Alice, such as beamforming and artificial noise (AN), are helpless, especially in the extreme case of completely collinear main and wiretap channel vectors. On this background, we first investigate the achievable secrecy outage probability via beamforming and AN at Alice with the optimal power allocation between the information-bearing signal and AN. Then, an ingenious model, in which a cooperative jamming relay (Relay) is introduced, is proposed to effectively mitigate the adverse effects of high correlation. Based on the proposed model, the power allocation between the information-bearing signal at Alice and the AN at Relay is also studied to maximize secrecy. Finally, to validate our proposed schemes, numerical simulations are conducted, and the results show that a significant performance gain with respect to secrecy is achieved.

arXiv:1708.04051•Aug 14, 2017•0 citations

A power allocation scheme for physical layer security based on large-scale fading

Ye Fan, Xuewen Liao, Zhenzhen Gao

This paper investigates a four-node wiretap network including one source (S), one relay (R), one legitimate receiver (D) and one eavesdropper (E) with cooperative jamming in a two-hop relay transmission. In the first phase, S transmits an useful signal to R while D transmits an interference signal with the purpose of confounding the eavesdropper. In the second phase, R broadcasts the mixture signal together to D. In this paper, based on large-scale fading, we propose two system models named One-link Wiretap Model and Three-link Wiretap Model to distinguish the receiving links at E. Then, a power allocation scheme is proposed to maximize the average secrecy capacity through two-dimension optimization. Meanwhile, we solve the optimization problem by two different methods called IBO and IAO. Simulation results show that the proposed power allocation strategy can achieve a higher average secrecy capacity than the reference scheme RJPA (Rate-optimal jamming power allocation) in the two models. Besides, a larger security range can be obtained by the proposed scheme.

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)•Aug 1, 2015•2 citations

On Maximizing the Secrecy Rate in a Cooperative Wireless Network using Friendly Jammers

Mohammad Hatami, Hamid Behroozi

In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.

•Sep 1, 2016•1 citation

Secrecy transmission with a helper: To relay or not to relay

Hao Deng, Hui‐Ming Wang, Wenjie Wang +1 more

In this paper, we consider secure communications between a source and a destination helped by a relay, in the presence of an eavesdropper. We consider both path-loss and fading in our channel models. We investigate such a question that whether the relay operates as a tradition relay or a jammer. A one time slot cooperative jamming and two time slots cooperative relaying transmission scheme are proposed. For fairness, we consider the total power constraint and assume that the two proposed schemes are with the same power budget. Optimal power allocation among the information signal and jamming signal are derived. For the proposed schemes, we give the performance comparison in the high and low transmitted power regimes, which gives some insight into the choice of transmission schemes to achieve a better performance. Furthermore, We analyze the impact of eavesdropper's position on security in our simulation.

IEEE International Conference on Communications workshops•Jun 1, 2014•8 citations
Achieving security at the physical layer in the presence of eavesdropper has always remained a critical issue under adverse channel conditions. The present scenario has relay with multiple antenna to combat channel effects. We have designed system model so that the nodes cooperate among themselves for the available power, with the aim to minimize the total transmit power, under a secrecy rate constraint. Here the relay sends out a jamming signal in order to confuse the eavesdropper. We assume correlated fading in the relay channels. The channel is modeled taking into account the large scale fading and small scale fading as well, through inclusion of path loss exponent and Rayleigh fading effects. The optimal power requirements for the source and the jammers are determined subject to the constraint of secrecy rate. The power allocation also depends upon path loss exponent, distance and fading parameters. The corresponding relaying regions have been plotted for real, equal and real, unequal roots of source power. Real, equal roots of source power are independent of position of relay. From the simulations we observe that the region expands when relays are away from the source.
Cooperative jamming is an approach that has been recently proposed for improving physical layer based security for wireless networks in the presence of an eavesdropper. While the source transmits its message to its destination, a relay node transmits a jamming signal to create interference at the eavesdropper. In this paper, a scenario in which the relay is equipped with multiple antennas is considered. A novel system design is proposed for determining the antenna weights and transmit power of source and relay, so that the system secrecy rate is maximized subject to a total transmit power constraint, or, the transmit power is minimized subject to a secrecy rate constraint. Since the optimal solutions to these problems are difficult to obtain, suboptimal closed-form solutions are proposed that introduce an additional constraint, i.e., the complete nulling of jamming signal at the destination.
Physical (PHY) layer security approaches for wireless communications can prevent eavesdropping without upper layer data encryption. However, they are hampered by wireless channel conditions: absent feedback, they are typically feasible only when the source-destination channel is better than the source-eavesdropper channel. Node cooperation is a means to overcome this challenge and improve the performance of secure wireless communications. This paper addresses secure communications of one source-destination pair with the help of multiple cooperating relays in the presence of one or more eavesdroppers. Three cooperative schemes are considered: decode-and-forward (DF), amplify-and-forward (AF), and cooperative jamming (CJ). For these schemes, the relays transmit a weighted version of a reencoded noise-free message signal (for DF), a received noisy source signal (for AF), or a common jamming signal (for CJ). Novel system designs are proposed, consisting of the determination of relay weights and the allocation of transmit power, that maximize the achievable secrecy rate subject to a transmit power constraint, or, minimize the transmit power subject to a secrecy rate constraint. For DF in the presence of one eavesdropper, closed-form optimal solutions are derived for the relay weights. For other problems, since the optimal relay weights are difficult to obtain, several criteria are considered leading to suboptimal but simple solutions, i.e., the complete nulling of the message signals at all eavesdroppers (for DF and AF), or the complete nulling of jamming signal at the destination (for CJ). Based on the designed relay weights, for DF in the presence of multiple eavesdroppers, and for CJ in the presence of one eavesdropper, the optimal power allocation is obtained in closed-form; in all other cases the optimal power allocation is obtained via iterative algorithms. Numerical evaluation of the obtained secrecy rate and transmit power results show that the proposed design can significantly improve the performance of secure wireless communications.
In physical layer security (PHY-security), the frequently observed high correlation between the main and wiretap channels can cause a significant loss of secrecy. This paper investigates a slow fading scenario, where a transmitter (Alice) sends a confidential message to a legitimate receiver (Bob) while a passive eavesdropper (Eve) attempts to decode the message from its received signal. It is assumed that Alice is equipped with multiple antennas while Bob and Eve each have a single antenna (i.e., a MISOSE system). In a MISOSE system, high correlation results in nearly collinear main and wiretap channel vectors, which help Eve to see and intercept confidential information. Unfortunately, the signal processing techniques at Alice, such as beamforming and artificial noise (AN), are helpless, especially in the extreme case of completely collinear main and wiretap channel vectors. On this background, we first investigate the achievable secrecy outage probability via beamforming and AN at Alice with the optimal power allocation between the information-bearing signal and AN. Then, an ingenious model, in which a cooperative jamming relay (Relay) is introduced, is proposed to effectively mitigate the adverse effects of high correlation. Based on the proposed model, the power allocation between the information-bearing signal at Alice and the AN at Relay is also studied to maximize secrecy. Finally, to validate our proposed schemes, numerical simulations are conducted, and the results show that a significant performance gain with respect to secrecy is achieved.
This paper investigates a four-node wiretap network including one source (S), one relay (R), one legitimate receiver (D) and one eavesdropper (E) with cooperative jamming in a two-hop relay transmission. In the first phase, S transmits an useful signal to R while D transmits an interference signal with the purpose of confounding the eavesdropper. In the second phase, R broadcasts the mixture signal together to D. In this paper, based on large-scale fading, we propose two system models named One-link Wiretap Model and Three-link Wiretap Model to distinguish the receiving links at E. Then, a power allocation scheme is proposed to maximize the average secrecy capacity through two-dimension optimization. Meanwhile, we solve the optimization problem by two different methods called IBO and IAO. Simulation results show that the proposed power allocation strategy can achieve a higher average secrecy capacity than the reference scheme RJPA (Rate-optimal jamming power allocation) in the two models. Besides, a larger security range can be obtained by the proposed scheme.
In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.
In this paper, we consider secure communications between a source and a destination helped by a relay, in the presence of an eavesdropper. We consider both path-loss and fading in our channel models. We investigate such a question that whether the relay operates as a tradition relay or a jammer. A one time slot cooperative jamming and two time slots cooperative relaying transmission scheme are proposed. For fairness, we consider the total power constraint and assume that the two proposed schemes are with the same power budget. Optimal power allocation among the information signal and jamming signal are derived. For the proposed schemes, we give the performance comparison in the high and low transmitted power regimes, which gives some insight into the choice of transmission schemes to achieve a better performance. Furthermore, We analyze the impact of eavesdropper's position on security in our simulation.