Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Josephson behavior in granular NbN weak links

J. H. Claassen

Published May 1, 1980• 29 citations
Publisher

Abstract

A substrate step technique has been used to fabricate superconducting NbN weak links of length ∼750 Å, width ∼1.5 μm. The film in the weak-link region is less than 100 Å thick, and shows evidence of being granular. These devices have very high resistance (as much as 30 Ω), are quite rugged, and show almost ideal Josephson response to microwave radiation at 70 GHz. A vortex flow model is expected to apply because of the small coherence length in the weak-link material. However, the well-known resistively shunted junction model is found to be a significantly better predictor of device behavior.

DOI
10.1063/1.91652

Related papers

Microwave properties of thin film NbN SQUIDs with granular weak lines

R. Steiner, Allen Paige Flora, Bascom S. Deaver +1 more

A series of NbN thin film SQUIDs with transition temperatures ranging from 5 K to ∼14 K are being characterized by microwave measurements at 9.6 GHz. The data are being used to determine the critical current, resistance, and energy sensitivity of each device, to identify features that may be related particularly to the granular nature of the weak links, and to study systematically the variations of the SQUID response with temperature. The devices are nominally 1 μm long, 10 nm thick and from 1 μm to ∼50 μm wide and are fabricated on 1 mm-diameter quartz rods. All have previously been well characterized as SQUIDs at 23 MHz. Detailed results are presented for the first five devices studied.

IEEE Transactions on Magnetics•Jan 1, 1981•1 citation

Noise properties of thin film granular weak link SQUIDs

Edward J. Cukauskas, Marty Nisenoff

A study of the magnetic flux noise in thin film NbN SQUIDS with variable thickness weak links has been initiated using the fractional step rise parameter, a , to characterize the noise. A series of devices have been fabricated and measured which exhibit Kurkijarvi magnetic flux noise, each over a restricted temperature range below their T . The T ' s for the devices ranged from below 5K to as (high as 15.7K. The variable thickness weak links are nominally 1 micrometer in length, between 50 microaeters to submicrometer in width and less than 10 MI. in thickness. For these thicknesses, the weak link region is granular ("inhomogeneous") in nature and the temperature dependence of the critical current obeys either the Josephson or the mean field theories depending on the strength of the intergranular coupling. The deduced magnetic flux noise obeys Kurki-jarvi theory for critical current values greater than 2@ /L but lessthanapproximately 61p /L for most deGices tested. The dependence of the 'measured magnetic flux noise on the degree of granularity of the weak link and the temperature dependence of the critical current is discussed.

IEEE Transactions on Magnetics•Jan 1, 1981•2 citations

High T c refractory thin-film microwave SQUID’s

Frederic J. Rachford, Edward J. Cukauskas

Thin-film SQUID’s fabricated from the high Tc refractory material NbN have been studied at 9.4 GHz. Devices with granular weak links display a Josephson critical current dependence over a wide range of temperatures below Tc. We have observed open loop signal-to-noise ratios as high as 20 000 corresponding to a minimum detectable energy of 1×10−30 J in a 1 Hz bandwidth over a temperature range of several °K. In two samples, the response time was found to be limited by the intrinsic gap response time, τg∼h//2Δ (T). These devices are rugged, stable, cycle well, and have good SQUID properties at both 9.4 GHz and 20 MHz.

Applied Physics Letters•Dec 1, 1979•6 citations

Josephson effects in granular NbN microbridges

Edward J. Cukauskas, J. H. Claassen, Marty Nisenoff +3 more

High resistance granular NbN microbridges with submicron dimensions have been fabricated and investigated. Devices with critical currents less than 5 microamps and bridge resistances of the order of 50 ohms have been studied as a function of temperature at both zero and finite voltages. The current‐voltage characteristics were measured with various levels of applied radiation in the frequency range 11–40 GHz. For these frequencies, constant voltage‐current steps were observed at the Josephson frequency, 2eV/h for low applied voltages, at higher voltages the radiation induced step spacing deviated from that of ideal Josephson behavior. Additional current steps were also observed at temperatures just above the bridge Tc where no finite critical current could be dected. These effects and other characteristics observed on the I‐V curves will be reported and discussed.

AIP conference proceedings•Jan 1, 1980•1 citation

Submillimeter detector operation of granular superconducting NbN films

G. L. Carr, David R. Karecki, Sidney Perkowitz

Detection of submillimeter radiation between 10 and 40 cm−1 (300–1200 GHz) has been carried out with a high resistance granular NbN film (R⧠= 8440 Ω/⧠) below 6 K with evidence of Josephson-like operation. The nonoptimized detector sensitivity and noise equivalent power at 17.5 cm−1 (525 GHz) were about 20 V/W and 5×10−8 W/Hz1/2, respectively, comparable to values obtained with granular Sn and Pb.

Journal of Applied Physics•May 15, 1984•7 citations

Properties of superconducting weak links prepared by ion implantation and by electron beam lithography

E. P. Harris, Robert B. Laibowitz

In this paper, we present our latest results on the properties of superconducting weak links prepared in Mo films by ion-implantation and in Nb films by electron-beam lithography. In the case of the ion-implanted weak links, which structurally resemble proximity-effect bridges, we find that the static properties are quite well described by a recent theory of Likharev and Yakobson. We further find that the rf response of these weak links is in excellent agreement with quasistatic resistively-shunted-junction model calculations based on a sinusoidal current-phase relation at those temperatures for which such a current-phase relation is predicted by the static theory of Likharev and Yakob-son. For the e-beam fabricated Nb bridges, which have the Dayem bridge geometry, our sample preparation techniques have allowed us to produce bridges and two-junction interferometers in which the link dimensions are as small as about 2000 Angstroms. We find that Josephson effects are observable in these bridges even when the bridge dimensions exceed the temperature-dependent coherence length by about an order of magnitude, but are still less than the effective thin-film penetration depth.

IEEE Transactions on Magnetics•Jan 1, 1977•21 citations
A substrate step technique has been used to fabricate superconducting NbN weak links of length ∼750 Å, width ∼1.5 μm. The film in the weak-link region is less than 100 Å thick, and shows evidence of being granular. These devices have very high resistance (as much as 30 Ω), are quite rugged, and show almost ideal Josephson response to microwave radiation at 70 GHz. A vortex flow model is expected to apply because of the small coherence length in the weak-link material. However, the well-known resistively shunted junction model is found to be a significantly better predictor of device behavior.
A series of NbN thin film SQUIDs with transition temperatures ranging from 5 K to ∼14 K are being characterized by microwave measurements at 9.6 GHz. The data are being used to determine the critical current, resistance, and energy sensitivity of each device, to identify features that may be related particularly to the granular nature of the weak links, and to study systematically the variations of the SQUID response with temperature. The devices are nominally 1 μm long, 10 nm thick and from 1 μm to ∼50 μm wide and are fabricated on 1 mm-diameter quartz rods. All have previously been well characterized as SQUIDs at 23 MHz. Detailed results are presented for the first five devices studied.
A study of the magnetic flux noise in thin film NbN SQUIDS with variable thickness weak links has been initiated using the fractional step rise parameter, a , to characterize the noise. A series of devices have been fabricated and measured which exhibit Kurkijarvi magnetic flux noise, each over a restricted temperature range below their T . The T ' s for the devices ranged from below 5K to as (high as 15.7K. The variable thickness weak links are nominally 1 micrometer in length, between 50 microaeters to submicrometer in width and less than 10 MI. in thickness. For these thicknesses, the weak link region is granular ("inhomogeneous") in nature and the temperature dependence of the critical current obeys either the Josephson or the mean field theories depending on the strength of the intergranular coupling. The deduced magnetic flux noise obeys Kurki-jarvi theory for critical current values greater than 2@ /L but lessthanapproximately 61p /L for most deGices tested. The dependence of the 'measured magnetic flux noise on the degree of granularity of the weak link and the temperature dependence of the critical current is discussed.
Thin-film SQUID’s fabricated from the high Tc refractory material NbN have been studied at 9.4 GHz. Devices with granular weak links display a Josephson critical current dependence over a wide range of temperatures below Tc. We have observed open loop signal-to-noise ratios as high as 20 000 corresponding to a minimum detectable energy of 1×10−30 J in a 1 Hz bandwidth over a temperature range of several °K. In two samples, the response time was found to be limited by the intrinsic gap response time, τg∼h//2Δ (T). These devices are rugged, stable, cycle well, and have good SQUID properties at both 9.4 GHz and 20 MHz.
High resistance granular NbN microbridges with submicron dimensions have been fabricated and investigated. Devices with critical currents less than 5 microamps and bridge resistances of the order of 50 ohms have been studied as a function of temperature at both zero and finite voltages. The current‐voltage characteristics were measured with various levels of applied radiation in the frequency range 11–40 GHz. For these frequencies, constant voltage‐current steps were observed at the Josephson frequency, 2eV/h for low applied voltages, at higher voltages the radiation induced step spacing deviated from that of ideal Josephson behavior. Additional current steps were also observed at temperatures just above the bridge Tc where no finite critical current could be dected. These effects and other characteristics observed on the I‐V curves will be reported and discussed.
In this paper, we present our latest results on the properties of superconducting weak links prepared in Mo films by ion-implantation and in Nb films by electron-beam lithography. In the case of the ion-implanted weak links, which structurally resemble proximity-effect bridges, we find that the static properties are quite well described by a recent theory of Likharev and Yakobson. We further find that the rf response of these weak links is in excellent agreement with quasistatic resistively-shunted-junction model calculations based on a sinusoidal current-phase relation at those temperatures for which such a current-phase relation is predicted by the static theory of Likharev and Yakob-son. For the e-beam fabricated Nb bridges, which have the Dayem bridge geometry, our sample preparation techniques have allowed us to produce bridges and two-junction interferometers in which the link dimensions are as small as about 2000 Angstroms. We find that Josephson effects are observable in these bridges even when the bridge dimensions exceed the temperature-dependent coherence length by about an order of magnitude, but are still less than the effective thin-film penetration depth.