Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Signal Processing Letters

Secure Relay and Jammer Selection for Physical Layer Security

Hui Hui, Arnold Lee Swindlehurst, Guobing Li, Junli Liang

Published Jan 6, 2015• 115 citations
Publisher

Abstract

Secure relay and jammer selection for physical-layer security is studied in a wireless network with multiple intermediate nodes and eavesdroppers, where each intermediate node either helps to forward messages as a relay, or broadcasts noise as a jammer. We derive a closed-form expression for the secrecy outage probability (SOP), and we develop two relay and jammer selection methods for SOP minimization. In both methods a selection vector and a corresponding threshold are designed and broadcast by the destination to ensure each intermediate node knows its own role while knowledge of the relay and jammer set is kept secret from all eavesdroppers. Simulation results show the SOP of the proposed methods are very close to that obtained by an exhaustive search, and that maintaining the privacy of the selection result greatly improves the SOP performance.

DOI
10.1109/lsp.2014.2387860

Related papers

Enhancing Physical Layer Security Through Cooperation in Wireless Networks

Jovana Božović, Enis Kočan

Physical Layer Security (PLS) provides a promising complementary approach to cryptographic methods for protecting wireless communications from eavesdropping. This paper investigates secrecy enhancement through cooperative relaying and jamming in a wireless network with two legitimate users, one eavesdropper, and five potential relay nodes operating in amplify-and-forward mode. Three relay–jammer selection strategies are considered: random relay and jammer selection, best-SNR (signal-to-noise ratio) relay with random jammer selection, and best-SNR relay with a jammer chosen based on the strongest channel toward the eavesdropper. The secrecy performance of these strategies are evaluated in terms of secrecy rate and secrecy outage probability. The results demonstrate that intelligent relay and jammer selection can significantly improve PLS compared to random selection, highlighting the benefits of cooperation in secure wireless systems.

•Feb 24, 2026•0 citations

Improving physical layer security in two-way cooperative networks with multiple eavesdroppers

Doaa H. Ibrahim, Emad S. Hassan, Sami A. El‐Dolil

In this paper, three different relay and jammers selection schemes are presented to improve the physical layer security of two-way cooperative networks in the presence of multiple cooperating and non-cooperating eavesdroppers. The presented selection schemes are; optimal selection scheme without jamming, optimal selection scheme with conventional jamming, and optimal selection scheme with controlled jamming. The proposed schemes select three intermediate nodes during two communication phases. In the first phase, a friendly jammer is selected to create intentional interference at the eavesdroppers' nodes. In the second phase, two relay nodes are selected; one node is selected to operate as a conventional relay and assists the sources to deliver their data to the corresponding destinations via a Decode-and-Forward (DF) strategy. While the other node behaves as a jammer node in order to confuse the eavesdroppers in this phase. The proposed schemes are analyzed in terms of ergodic secrecy rate and secrecy outage probability. The obtained results show that the jamming schemes outperform the non-jamming schemes in the eavesdroppers' environment. Moreover, cooperating eavesdroppers' further degrade system's secrecy performance than the non-cooperating ones. Finally, a comparison between relay and jammers selection schemes in both one-way and two-way cooperative networks is given in terms of both ergodic secrecy rate and secrecy outage probability metrics.

International Conference on Informatics and Systems•Dec 1, 2014•9 citations

Security-Enhanced Relay and Jammer Selection for Energy-Harvesting IoT Networks

Hui Hui, Bo Wang, Bo Gou

Internet of Things (IoT), which can provide ubiquitous intelligence and pervasive interconnections to a variety of devices, is becoming a vital component of building the intelligent world. In this work we propose a new relay and jammer selection method to improve physical layer security (PLS) and energy efficiency for the IoT network with energy harvesting (EH) devices. In this method, the intermediate nodes are allowed to use time switching (TS) protocol to harvest energy from power transfer stations (PTS). By taking the channel gain between the PTSs and the intermediate nodes into consideration, two intermediate nodes are selected as relay and jammer respectively to transmit confidential and jamming signals to the destination and eavesdropper aiming at minimizing the secrecy outage probability (SOP). We further analyze the secrecy outage of the system and derive the closed-form expression of SOP. Simulation results demonstrate the performance gain of the proposed method.

Chinese Automation Congress•Nov 1, 2018•1 citation

Power-Constrained Secrecy Rate Maximization for Joint Relay and Jammer Selection Assisted Wireless Networks

Haiyan Guo, Zhen Yang, Linghua Zhang +2 more

In this paper, we examine the physical layer security for cooperative wireless networks with multiple intermediate nodes, where the decode-and-forward protocol is considered. We propose a new joint relay and jammer selection (JRJS) scheme for protecting wireless communications against eavesdropping, where an intermediate node is selected as the relay for the sake of forwarding the source signal to the destination and meanwhile, the remaining intermediate nodes are employed to act as friendly jammers, which broadcast the artificial noise for disturbing the eavesdropper. We further investigate the power allocation among the source, relay and friendly jammers for maximizing the secrecy rate of proposed JRJS scheme, and derive a closed-form sub-optimal solution. Specifically, all the intermediate nodes, which successfully decode the source signal, are considered as relay candidates. For each candidate, we derive the sub-optimal closed-form power allocation solution and obtain the secrecy rate result of the corresponding JRJS scheme. Then, the candidate, which is capable of achieving the highest secrecy rate, is selected as the relay. Two assumptions about the channel state information (CSI), namely the full CSI (FCSI) and partial CSI (PCSI), are considered. Simulation results show that the proposed JRJS scheme outperforms the conventional pure relay selection, pure jamming, and generalized singular-value-decomposition-based beamforming schemes in terms of secrecy rate. Additionally, the proposed FCSI-based power allocation and PCSI-based power allocation schemes both achieve higher secrecy rates than the equal power allocation scheme.

arXiv:1701.01820•IEEE Transactions on Communications•Jan 10, 2017•44 citations

Two-phase cooperative jamming and beamforming for physical layer secrecy

Mohammad Hatami, Mojtaba Jahandideh, Hamid Behroozi

The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.

Iranian Conference on Electrical Engineering•May 1, 2015•2 citations

On Maximizing the Secrecy Rate in a Cooperative Wireless Network using Friendly Jammers

Mohammad Hatami, Hamid Behroozi

In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.

•Sep 1, 2016•1 citation
Secure relay and jammer selection for physical-layer security is studied in a wireless network with multiple intermediate nodes and eavesdroppers, where each intermediate node either helps to forward messages as a relay, or broadcasts noise as a jammer. We derive a closed-form expression for the secrecy outage probability (SOP), and we develop two relay and jammer selection methods for SOP minimization. In both methods a selection vector and a corresponding threshold are designed and broadcast by the destination to ensure each intermediate node knows its own role while knowledge of the relay and jammer set is kept secret from all eavesdroppers. Simulation results show the SOP of the proposed methods are very close to that obtained by an exhaustive search, and that maintaining the privacy of the selection result greatly improves the SOP performance.
Physical Layer Security (PLS) provides a promising complementary approach to cryptographic methods for protecting wireless communications from eavesdropping. This paper investigates secrecy enhancement through cooperative relaying and jamming in a wireless network with two legitimate users, one eavesdropper, and five potential relay nodes operating in amplify-and-forward mode. Three relay–jammer selection strategies are considered: random relay and jammer selection, best-SNR (signal-to-noise ratio) relay with random jammer selection, and best-SNR relay with a jammer chosen based on the strongest channel toward the eavesdropper. The secrecy performance of these strategies are evaluated in terms of secrecy rate and secrecy outage probability. The results demonstrate that intelligent relay and jammer selection can significantly improve PLS compared to random selection, highlighting the benefits of cooperation in secure wireless systems.
In this paper, three different relay and jammers selection schemes are presented to improve the physical layer security of two-way cooperative networks in the presence of multiple cooperating and non-cooperating eavesdroppers. The presented selection schemes are; optimal selection scheme without jamming, optimal selection scheme with conventional jamming, and optimal selection scheme with controlled jamming. The proposed schemes select three intermediate nodes during two communication phases. In the first phase, a friendly jammer is selected to create intentional interference at the eavesdroppers' nodes. In the second phase, two relay nodes are selected; one node is selected to operate as a conventional relay and assists the sources to deliver their data to the corresponding destinations via a Decode-and-Forward (DF) strategy. While the other node behaves as a jammer node in order to confuse the eavesdroppers in this phase. The proposed schemes are analyzed in terms of ergodic secrecy rate and secrecy outage probability. The obtained results show that the jamming schemes outperform the non-jamming schemes in the eavesdroppers' environment. Moreover, cooperating eavesdroppers' further degrade system's secrecy performance than the non-cooperating ones. Finally, a comparison between relay and jammers selection schemes in both one-way and two-way cooperative networks is given in terms of both ergodic secrecy rate and secrecy outage probability metrics.
Internet of Things (IoT), which can provide ubiquitous intelligence and pervasive interconnections to a variety of devices, is becoming a vital component of building the intelligent world. In this work we propose a new relay and jammer selection method to improve physical layer security (PLS) and energy efficiency for the IoT network with energy harvesting (EH) devices. In this method, the intermediate nodes are allowed to use time switching (TS) protocol to harvest energy from power transfer stations (PTS). By taking the channel gain between the PTSs and the intermediate nodes into consideration, two intermediate nodes are selected as relay and jammer respectively to transmit confidential and jamming signals to the destination and eavesdropper aiming at minimizing the secrecy outage probability (SOP). We further analyze the secrecy outage of the system and derive the closed-form expression of SOP. Simulation results demonstrate the performance gain of the proposed method.
In this paper, we examine the physical layer security for cooperative wireless networks with multiple intermediate nodes, where the decode-and-forward protocol is considered. We propose a new joint relay and jammer selection (JRJS) scheme for protecting wireless communications against eavesdropping, where an intermediate node is selected as the relay for the sake of forwarding the source signal to the destination and meanwhile, the remaining intermediate nodes are employed to act as friendly jammers, which broadcast the artificial noise for disturbing the eavesdropper. We further investigate the power allocation among the source, relay and friendly jammers for maximizing the secrecy rate of proposed JRJS scheme, and derive a closed-form sub-optimal solution. Specifically, all the intermediate nodes, which successfully decode the source signal, are considered as relay candidates. For each candidate, we derive the sub-optimal closed-form power allocation solution and obtain the secrecy rate result of the corresponding JRJS scheme. Then, the candidate, which is capable of achieving the highest secrecy rate, is selected as the relay. Two assumptions about the channel state information (CSI), namely the full CSI (FCSI) and partial CSI (PCSI), are considered. Simulation results show that the proposed JRJS scheme outperforms the conventional pure relay selection, pure jamming, and generalized singular-value-decomposition-based beamforming schemes in terms of secrecy rate. Additionally, the proposed FCSI-based power allocation and PCSI-based power allocation schemes both achieve higher secrecy rates than the equal power allocation scheme.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
In this paper, the security of two-phase relaying system with multiple intermediate nodes in the presence of a malicious eavesdropper is investigated. To enhance the secrecy, a joint cooperative beamforming and jamming combined with relay and jammer selection is proposed. First, the source broadcasts its signal to the relays that are located close to source in a cluster, i.e., the source node uses a small amount of power to broadcast its message locally to other nodes of the cluster, while destination and the eavesdropper are located outside this cluster. In the second phase, two relays transmit re-encoded signal with optimal beamforming such that the secrecy rate is maximized. Simultaneously, two other intermediate nodes (which act as friendly jammers) transmit random jamming signals to degrade the eavesdropper’s channel. Our goal in this paper is to maximize the secrecy rate by applying different methods such as cooperative beamforming, cooperative jamming and relay and jammer selection. To avoid operational complexity, we consider the minimum number of intermediate nodes needed for relaying and jamming without losing the performance, i.e., achieving a non-zero secrecy rate. Cooperative beamforming with multiple relays demands high amount of information exchange and therefore increases the operational complexity. Thus, we aim to reduce the number of relays which take part in cooperative beamforming. Limiting the number of relays may have a bad effect on the coding gain which we compensate it with a proposed selection gain scheme. Numerical results demonstrate the advantage of our proposed scheme compared to the scheme with no cooperative jamming. The main contribution of this work is combining cooperative beamforming and jamming with relay and jammer selection to enhance the physical layer security.