In this study an interesting system in which a bright and dark soliton pulse can be stopped inside a nonlinear waveguide is presented. Here, we propose a system consisting of a series of ring resonators for optical trapping within a nonlinear waveguide. The bright and dark solitons can be controlled and slowed down within the waveguide. The FWHM for the output signals are calculated and used as an optical memory. Bright and dark soliton behaviors within a micro and nano ring resonator are also investigated and described. The required pulse is filtered and amplified, can be controlled and localized within the system. The localized bright and dark solitons are stopped by controlling the input power, which means that the photon stopping can be controlled by light in a ring resonator. Key words: Dark soliton; bright soliton; nonlinear nano waveguide; stopped light
In this study an interesting system in which a bright and dark soliton pulse can be stopped inside a nonlinear waveguide is presented. Here, we propose a system consisting of a series of ring resonators for optical trapping within a nonlinear waveguide. The bright and dark solitons can be controlled and slowed down within the waveguide. The FWHM for the output signals are calculated and used as an optical memory. Bright and dark soliton behaviors within a micro and nano ring resonator are also investigated and described. The required pulse is filtered and amplified, can be controlled and localized within the system. The localized bright and dark solitons are stopped by controlling the input power, which means that the photon stopping can be controlled by light in a ring resonator. Key words: Dark soliton; bright soliton; nonlinear nano waveguide; stopped light
A simple system of an all-optical system for stopping and storing is proposed. A system consists of two microring and a nanoring resonators that can be integrated into a single system. The large bandwidth is generated by a soliton pulse within a Kerr-type nonlinear medium where an all-optical adiabatic and pulse bandwidth compression can be performed. The balance between the dispersion and nonlinear lengths of the soliton pulse exhibits the soliton behavior known as self-phase modulation, which produces a constant optical output. This means that light pulse can be trapped, i.e., stopped optically within the nano waveguide.
We propose a novel system of a dark-bright soliton pulse conversion that can be dynamically controlled by the desired input signal within an add/drop optical filter, where the dark solition signals are controlled, tuned and amplified by the input bright soliton. In this paper, the dynamic behavior of dark-bright soliton interaction is analyzed and described. The optical storages are embedded within the add/drop optical filter system, whereas the generated optical signals can be stored and amplified. In application, the storage signals can be configured to be an optical trapping tool/potential well which is known as optical tweezers, where the high field peak signal or well can be formed the trapping tool.
Whispering gallery modes (WGMs) of waves in nature such as electromagnetic wave, sound wave, and matter wave have shown interesting results, which can be useful for fundamental studies and applications in optoelectronics and nanoelectronics, especially after the announcement of the 2012 Nobel Prize in Physics for WGMs [1,2], where the authors confirmed that atoms can be trapped (stopped) by using WGMs in a microsphere. However, there are two more kinds of devices that can be used to trap light beams (atoms); the use of microcavity arrays performed by Yanik and Fan [3], and a nonlinear microring resonator by Yupapin and Pornsuwancharoen [4] for stopping light. Recently, Ang and Ngo [5] have also done experiments with slowing light in microresonators using a microring system. In this article, a new design of microring resonator device is proposed, which can be used to generate four forms of light simultaneously on a chip, whereas the storing and harvesting of trapped atoms/molecules can also be available. The proposed device is made up of silica and InGaAsP/InP with linear optical add-drop filter incorporating two nonlinear micro/nano rings on both sides of the center ring (modified add-drop filter). This particular configuration is known as a PANDA ring resonator [6] as shown in Figure 14.1. Light pulse, for instance, Gaussian, and bright and dark solitons are fed into the system through different ports such as an add port and through port. By using the practical device parameters, the simulation results are obtained using the Optiwave and MATLAB programs. Results obtained by both analytical and numerical methods show that many applications can be exploited. In application, when the practical device parameters are used, then such a device can be fabricated and implemented in the near future.
This chapter presents the techniques of generating slow and fast pulse using micro-ring resonator (MRR). MRR systems made of different materials. Micro-ring device can be constructed with radius in the size of a micron. The chapter utilises the input power below and above threshold value to investigate the behavior of light pulse in term of linearity and nonlinearity. To generate slow light, series of ring resonators is used. In this method, the nonlinear effect of waveguide is neglected because of threshold power of nonlinear effect. Bright soliton and Gaussian beam can be used for three waveguide as input pulses. In this method chaotic signal can be canceled by neglecting nonlinear effects. All optical waveguide materials to generate slow and fast light should be dispersive. This means that the refractive index varies with wavelength. There are several ways to measure dispersion in materials.
We propose a novel system of an optical trapping tool using a dark-bright soliton pulse-propagating within an add/drop optical filter. The multiplexing signals with different wavelengths of the dark soliton are controlled and amplified within the system. The dynamic behavior of dark bright soliton interaction is analyzed and described. The storage signal is controlled and tuned to be an optical probe which can be configured as the optical tweezer. The optical tweezer storage is embedded within the add/drop optical filter system. By using some suitable parameters, we found that the tweezers storage time of 1.2 ns is achieved. Therefore, the generated optical tweezers can be stored and amplified within the design system. In application, the optical tweezers can be stored and trapped light/atom, which can be transmitted and recovered by using the proposed system.