Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Applied Physics

Thermally induced optical bistability and self-oscillation in a nonlinear etalon filled with optical adhesive

Hong Jin Kong, Wol Yon Hwang

Published May 15, 1990• 5 citations
Publisher

Abstract

We report the optical bistability and the self-oscillation of a nonlinear Fabry–Perot etalon filled with Norland optical adhesive 81. A normal and an inverted bistable loop were observed for a short (80msec) and a long (1.2sec) input optical pulse duration, respectively. The self-oscillation properties depended sensitively on the substrate and the spacer thicknesses. The measured self-oscillation period became longer with an increase of the spacer thickness and was in the range o 0.2 to 3 seconds. The inversion of the bistable loop, and the self-oscillation in this experiment can be explained by the competition between the fast thermal refractive index change and the slow linear thermal expansion of the etalon.

DOI
10.1063/1.345218

Related papers

Optical bistability and self-oscillation of a nonlinear Fabry–Perot interferometer filled with a nematic-liquid-crystal film

M. M. Cheung, Stephen D. Durbin, Y. Ron Shen

A Fabry-Perot interferometer filled with an 83-microm-thick nematic-liquid-crystal film exhibits multiple-order optical bistability and self-oscillation. The oscillation is shown to be due to two competing mechanisms with different response times contributing to the laser-induced refractive-index change.

Optics Letters•Jan 1, 1983•62 citations

Design and Investigation of a Nonlinear Fabry-Perot Device with Gaas Spacer Layer

B. Acklin, C. Bagnoud, M.‐A. Dupertuis

A bistable etalon, consisting of an optically nonlinear semiconductor spacer layer sandwiched between two Bragg mirrors, has been optimized for use in reflection, using a numerical model for a self-consistent carrier density based on published experimental data for the nonlinear absorption alpha(I,lambda) and refraction DELTA-n(I,lambda). The saturation behavior of the refractive index and the absorption in bulk GaAs has been investigated at different wavelengths. High saturation values of DELTA-n(s) almost-equal-to .080 were found 20 meV below the gap. 30 meV above the gap we observed a comparable index change, together with an absorption saturation feature, leading to a highly nonlinear response close to the bistability threshold in our unoptimized etalon.

Annales de Physique•Jan 1, 1991•1 citation

광학용 에폭시를 중간층으로 하는 Fabry-perot 에탈론에서의 광쌍안정현상 및 자기발진 = Optical bistability and self-oscillation in a fabry-perot etalon filled with optical adhesive

황월연, Wol-Yon Hwang

•Jan 1, 1989•0 citations

Optical bistability in a dissipative thermally expanding etalon

N. M. Lawandy, David V. Plant, Douglas Robert MacFarlane

The phenomenon of optical bistability is examined for the case of a lossy Fabry-Perot etalon. Using a multibeam interference method and thermal length expansion relationships, we derive an inverted equation which predicts the output transmission for such an etalon. Specific operating parameters are given for silicon wafer structures operating in the lattice vibration absorption regime (10 μm). Experiments using 15 ms CO2laser pulses and Si wafers show resonance-to-nonresonance switching.

IEEE Journal of Quantum Electronics•Feb 1, 1985•5 citations

Optical Bistability In Air-Spaced Fabry-Perot Etalons Caused By Thermal Expansion

W. Lukosz, P. Pirani, G. Appenzeller-Combe

We demonstrated optical bistability in air-spaced Fabry-Perot etalons caused by thermal expansion of the mirror substrates and a concomitant reduction in mirror separation. The theory of this type of bistability is presented. Experimental results for metal mirror coat-ings of gold or aluminium on glass and polymethylmethacrylate (PMMA) at the He-Ne laser wavelength λ=632.8 nm are given.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 8, 1989•3 citations

Optimum diameter for laser beam and effect of temperature rise on the optical bistability hysteresis loops

Ali Hassan Khidhir

In this research, analytical study for simulating a Fabry-Perot bistable etalon (F-P cavity) filled with a dispersive optimized nonlinear optical material (Kerr type) such as semiconductors Indium Antimonide (InSb). An optimization procedure using reflective (~85%) InSb etalon (~50µm) thick is described. For this etalon with a (50 µm) spot diameter beam, the minimum switching power is (~0.078 mW) and switching time is (~150 ns), leading to a switching energy of (~11.77 pJ) for this device. Also, the main role played by the temperature to change the etalon characteristic from nonlinear to linear dynamics.

Iraqi Journal of Physics•Jun 1, 2020•0 citations
We report the optical bistability and the self-oscillation of a nonlinear Fabry–Perot etalon filled with Norland optical adhesive 81. A normal and an inverted bistable loop were observed for a short (80msec) and a long (1.2sec) input optical pulse duration, respectively. The self-oscillation properties depended sensitively on the substrate and the spacer thicknesses. The measured self-oscillation period became longer with an increase of the spacer thickness and was in the range o 0.2 to 3 seconds. The inversion of the bistable loop, and the self-oscillation in this experiment can be explained by the competition between the fast thermal refractive index change and the slow linear thermal expansion of the etalon.
A bistable etalon, consisting of an optically nonlinear semiconductor spacer layer sandwiched between two Bragg mirrors, has been optimized for use in reflection, using a numerical model for a self-consistent carrier density based on published experimental data for the nonlinear absorption alpha(I,lambda) and refraction DELTA-n(I,lambda). The saturation behavior of the refractive index and the absorption in bulk GaAs has been investigated at different wavelengths. High saturation values of DELTA-n(s) almost-equal-to .080 were found 20 meV below the gap. 30 meV above the gap we observed a comparable index change, together with an absorption saturation feature, leading to a highly nonlinear response close to the bistability threshold in our unoptimized etalon.
In this research, analytical study for simulating a Fabry-Perot bistable etalon (F-P cavity) filled with a dispersive optimized nonlinear optical material (Kerr type) such as semiconductors Indium Antimonide (InSb). An optimization procedure using reflective (~85%) InSb etalon (~50µm) thick is described. For this etalon with a (50 µm) spot diameter beam, the minimum switching power is (~0.078 mW) and switching time is (~150 ns), leading to a switching energy of (~11.77 pJ) for this device. Also, the main role played by the temperature to change the etalon characteristic from nonlinear to linear dynamics.