Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Modern Optics

Demonstration of a radio-frequency spectrum analyser based on spectral hole burning

I. Lorgeré, Loïc Ménager, V. Lavielle, Jean-Louis Le Gouët, Daniel Dolfi, S. Tonda, Jean‐Pierre Huignard

Published Nov 1, 2002• 29 citations
Publisher

Abstract

We demonstrate application of spectral hole burning to the spectral analysis of broad-band rf signals. In quite the same way as an acousto-optic spectrometer, the device operates on an optically carried rf signal and achieves angular separation of the signal spectral components. An instantaneous bandwidth of 2.5 GHz has been achieved, with a power dynamic range of 35 dB, limited by the detector. Extension to greater than 10 GHz instantaneous bandwidth with greater than 1000 channels is consistent with the active material capabilities.

DOI
10.1080/0950034021000011419

Related papers

Demonstration of a radio-frequency spectrum analyzer based on spectral hole burning

Loïc Ménager, I. Lorgeré, Jean-Louis Le Gouët +2 more

Spectral hole-burning (SHB) technology is considered for >10-GHz instantaneous bandwidth signal-processing applications. In this context we report on what is believed to be the first demonstration of a SHB microwave spectrometer. A set of gratings engraved in a SHB crystal is used to filter one sideband of the optically carried microwave signal. The setup is confined to narrow-bandwidth operation, over a 35-MHz-wide interval. The first findings confirm the validity of the architecture in terms of spectral resolution, angular channel separation, and simultaneous detection of multiple spectral lines.

Optics Letters•Aug 15, 2001•56 citations

Spectral hole burning for wideband, high-resolution radio-frequency spectrum analysis

Friso Schlottau, Max Colice, Kelvin H. Wagner +1 more

We present experimental results for what is to our knowledge the first spectral-hole-burning based rf spectrum analyzer to cover 10 GHz of rf analysis bandwidth. The rf signal of interest is modulated onto an optical carrier, and the resultant optical sidebands are burned into the inhomogeneously broadened absorption band of a Tm3+:YAG crystal. At the same time a second, frequency-swept laser reads out the absorption profile, which is a double-sideband replica of the rf spectrum, and thus the rf spectrum can be deduced after spectral calibration of the nonlinear readout chirp. This initial demonstration shows spectral analysis covering 10 GHz of bandwidth with >5500 spectral channels and provides 43 dB of dynamic range.

Optics Letters•Nov 15, 2005•47 citations

Radio frequency spectrum analyzer based on spectral hole burning: experimental progress and future steps

I. Lorgeré, V. Lavielle, F. de Sèze +1 more

We report on spectral-hole-burning-based instantaneous spectral analysis of optically carried broadband radio frequency signals. We have demonstrated 100-channel operation over 3.3 GHz bandwidth. We discuss future steps towards 10 GHz bandwidth and 1000-channel operation.

Conference on Lasers and Electro-Optics•May 16, 2004•0 citations

Wideband versatile radio-frequency spectrum analyzer

V. Lavielle, I. Lorgeré, J.-L. Le Gouët +2 more

Operation of a wideband, versatile optical spectrum analyzer for radio-frequency (RF) signals is demonstrated. The device is based on spectral hole burning (SHB). The demonstration features 2.3-GHz instantaneous bandwidth, 500-kHz resolution, and a 32-dB dynamic range. A true RF signal, transferred to the optical carrier with the help of a Mach-Zehnder modulator, is analyzed with optical carrier suppression and zooming capabilities. This is to the authors' knowledge the largest instantaneous bandwidth ever demonstrated for a SHB-based processor in rare-earth-doped crystals.

Optics Letters•Mar 15, 2003•65 citations

Broadband radio-frequency spectrum analyzer based on spectral hole burning

Lavielle, Menager, Lorgere +4 more

We demonstrate application of spectral hole burning to the spectral analysis of broadband radio frequency signals. The device operates on an optically carried RF signal and achieves the angular separation of the signal spectral components.

International Topical Meeting on Microwave Photonics•Jan 1, 2002•0 citations

Broadband radio-frequency spectrum analyzer based on spectral hole burning

V. Lavielle, Loïc Ménager, I. Lorgeré +4 more

Application of spectral hole burning to the spectral analysis of broadband radio frequency signals is demonstrated. The device operates on an optically carried RF signal and achieves the angular separation of the signal spectral components.

IEEE Lasers and Electro-Optics Society Annual Meeting (LEOS)•Nov 21, 2003•0 citations
We demonstrate application of spectral hole burning to the spectral analysis of broad-band rf signals. In quite the same way as an acousto-optic spectrometer, the device operates on an optically carried rf signal and achieves angular separation of the signal spectral components. An instantaneous bandwidth of 2.5 GHz has been achieved, with a power dynamic range of 35 dB, limited by the detector. Extension to greater than 10 GHz instantaneous bandwidth with greater than 1000 channels is consistent with the active material capabilities.
Spectral hole-burning (SHB) technology is considered for >10-GHz instantaneous bandwidth signal-processing applications. In this context we report on what is believed to be the first demonstration of a SHB microwave spectrometer. A set of gratings engraved in a SHB crystal is used to filter one sideband of the optically carried microwave signal. The setup is confined to narrow-bandwidth operation, over a 35-MHz-wide interval. The first findings confirm the validity of the architecture in terms of spectral resolution, angular channel separation, and simultaneous detection of multiple spectral lines.
We present experimental results for what is to our knowledge the first spectral-hole-burning based rf spectrum analyzer to cover 10 GHz of rf analysis bandwidth. The rf signal of interest is modulated onto an optical carrier, and the resultant optical sidebands are burned into the inhomogeneously broadened absorption band of a Tm3+:YAG crystal. At the same time a second, frequency-swept laser reads out the absorption profile, which is a double-sideband replica of the rf spectrum, and thus the rf spectrum can be deduced after spectral calibration of the nonlinear readout chirp. This initial demonstration shows spectral analysis covering 10 GHz of bandwidth with >5500 spectral channels and provides 43 dB of dynamic range.
Operation of a wideband, versatile optical spectrum analyzer for radio-frequency (RF) signals is demonstrated. The device is based on spectral hole burning (SHB). The demonstration features 2.3-GHz instantaneous bandwidth, 500-kHz resolution, and a 32-dB dynamic range. A true RF signal, transferred to the optical carrier with the help of a Mach-Zehnder modulator, is analyzed with optical carrier suppression and zooming capabilities. This is to the authors' knowledge the largest instantaneous bandwidth ever demonstrated for a SHB-based processor in rare-earth-doped crystals.