Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Journal of Quantum Electronics

A Shot-Noise Limited Fiber Laser Source by Cascaded Passive Optical Filtering

T. Nguyen, J. H. Chow, Conor M Mow-Lowry, Malcolm B. Gray, David E. McClelland

Published Mar 12, 2010• 2 citations
Publisher

Abstract

We present a technique for suppressing relative intensity noise in a fiber laser, which uses two Pound-Drever-Hall feedback control loops to lock two optical fiber ring resonators in series. The resonators act as cascaded passive optical filters to remove high frequency intensity noise. We describe and discuss the control scheme for holding the cavities on resonance, and present the experimental result, demonstrating shot noise limited performance for intensity fluctuations above 2.5 MHz.

DOI
10.1109/jqe.2010.2043217

Related papers

Passive filtering of fiber laser intensity noise by active frequency locking to a fiber resonators

J. H. Chow, Ian C. M. Littler, David E. McClelland +1 more

We demonstrate passive filtering of laser relative intensity noise by active frequency locking a laser to a cavity, thereby producing a shot-noise limited optical source suitable for quantum cryptographic communications.

European Conference on Optical Communication•Jan 1, 2008•0 citations

Using a Passive Fiber Ring Cavity to Generate Shot-Noise-Limited Laser Light for Low-Power Quantum Optics Applications

Malcolm B. Gray, J. H. Chow, Kirk McKenzie +1 more

High-stability single-frequency fiber lasers typically exhibit relative intensity noise that is far in excess of shot noise across a broad frequency range extending from dc to many tens of megahertz. This excess noise precludes the use of these fiber lasers in a range of precision interferometry and quantum optics applications. We present experimental results using a passive, highQ, fiber ring resonator to filter out up to 26 dB of excess laser intensity noise, resulting in a stabilized laser output that reaches the shot-noise limit over most of its signal spectrum.

IEEE Photonics Technology Letters•Jun 28, 2007•8 citations

Ultrabroadband Passive Laser Noise Suppression to Quantum Noise Limit through on-chip Second Harmonic Generation

Geun Ho Ahn, Ziyu Wang, Devin J. Dean +5 more

Laser intensity noise limits performance in quantum sensing, metrology, and computing. Existing stabilization methods face a trade-off between bandwidth and complexity: electronic feedback loops are speed-limited, while optical resonators are constrained by narrow linewidths and locking requirements. Here, we demonstrate an all-optical "noise eater" that passively suppresses intensity fluctuations from DC to >10 gigahertz. By leveraging high-efficiency second-harmonic generation in nanophotonic lithium niobate waveguides, we operate at a pump-depletion stationary point where input fluctuations are decoupled from the output to first order. This passive and nonresonant nanophotonic device suppresses relative intensity noise by 25 to 60 dB over the full measurement bandwidth and stabilizes a noisy fiber amplifier output to the shot-noise limit. Our results establish a scalable, wide-bandwidth paradigm for laser stabilization essential for high-throughput quantum technologies and deployable photonic sensing systems.

physics.opticsCross-listedarXiv:2603.25801•Mar 30, 2026•0 citations

Broadband near-to-shot-noise suppression of arbitrary cw-laser excess intensity noise in the gigahertz range

Ernest A. Michael, Laurent Pallanca

Broadband near-to-shot-noise suppression of the intensity noise from a continuous-wave (cw) fiber laser at 1550 nm is demonstrated at GHz-frequencies using feed-forward phase-matched destructive noise interference impressed onto the optical signal with a fiber electro-optic power modulator. The scheme is independent of the laser frequency and therefore is suitable for tunable lasers. It can be used with some modifications after an optical fiber-amplifier boosting a cw laser signal. A noise residual of down to 2 dB above the shot-noise was measured, which is about 2 dB below the prediction with a rigorous noise model. While the total laser noise can be removed, inclusive shot noise, because the latter is still 10 dB above the thermal noise, the power splitter introduces some partition noise above the shot level. In that case, a sub-shot-noise suppression scheme should be possible by replacing the photon anti-correlation of the power splitter by the co-correlation obtained from a paired photon or twin beam source.

Optics Letters•Mar 20, 2015•10 citations

Low phase noise cavity transmission self-injection locked diode laser system for atomic physics experiments

Ludwig Krinner, Kai Dietze, Lennart Pelzer +2 more

Lasers with high spectral purity are indispensable for optical clocks and for the coherent manipulation of atomic and molecular qubits in applications such as quantum computing and quantum simulation. While the stabilization of such lasers to a reference can provide a narrow linewidth, the widely used diode lasers exhibit fast phase noise that prevents high-fidelity qubit manipulation. In this paper, we demonstrate a self-injection locked diode laser system that utilizes a high-finesse cavity. This cavity not only provides a stable resonance frequency, it also acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped 40 Ca + -ion as a spectrum analyzer. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between −110 dBc/Hz and −120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates when using diode lasers in applications involving quantum logic spectroscopy, quantum simulation, and quantum computation.

arXiv:2311.03461•Optics Express•Apr 2, 2024•17 citations

Characteristics of Intensity Noise Reduction of Optical Pulses Using Variable Spectral Filters and Optical Fibers

Norihiko Nishizawa, Junichi Higuchi, Masakazu Mori +2 more

Noise reduction of optical pulses using variable spectral filters and optical fibers in the anomalous dispersion region is investigated numerically and experimentally. In the numerical analysis, quantum noise evolution of the optical pulse is calculated using a quantized nonlinear Schrödinger equation and linearization approximation. It is shown that when the optical spectrum is in the broadening process, photon-number squeezing can be obtained using a band-pass filter. On the other hand, when the optical spectrum is in the narrowing process, a correlated pulse pair is generated using a band-rejection filter and photon number squeezing can be also observed. In the experiment, the characteristics of noise reduction of optical pulses are investigated using a passively mode-locked fiber laser at 1.55 µm and a variable spectral filter. Noise distribution of optical pulses changes periodically as the fiber input power is changed. Intensity noise of the fiber laser is reduced by as much as 23 dB using the band-pass filter and is slightly reduced below the shot noise level. Using the band-rejection filter, the noise reduction by the correlated pulse pair is confirmed. The characteristics of the experimental results are almost in agreement with those of the numerical ones.

Japanese Journal of Applied Physics•Oct 1, 2000•5 citations
We present a technique for suppressing relative intensity noise in a fiber laser, which uses two Pound-Drever-Hall feedback control loops to lock two optical fiber ring resonators in series. The resonators act as cascaded passive optical filters to remove high frequency intensity noise. We describe and discuss the control scheme for holding the cavities on resonance, and present the experimental result, demonstrating shot noise limited performance for intensity fluctuations above 2.5 MHz.
High-stability single-frequency fiber lasers typically exhibit relative intensity noise that is far in excess of shot noise across a broad frequency range extending from dc to many tens of megahertz. This excess noise precludes the use of these fiber lasers in a range of precision interferometry and quantum optics applications. We present experimental results using a passive, highQ, fiber ring resonator to filter out up to 26 dB of excess laser intensity noise, resulting in a stabilized laser output that reaches the shot-noise limit over most of its signal spectrum.
Laser intensity noise limits performance in quantum sensing, metrology, and computing. Existing stabilization methods face a trade-off between bandwidth and complexity: electronic feedback loops are speed-limited, while optical resonators are constrained by narrow linewidths and locking requirements. Here, we demonstrate an all-optical "noise eater" that passively suppresses intensity fluctuations from DC to >10 gigahertz. By leveraging high-efficiency second-harmonic generation in nanophotonic lithium niobate waveguides, we operate at a pump-depletion stationary point where input fluctuations are decoupled from the output to first order. This passive and nonresonant nanophotonic device suppresses relative intensity noise by 25 to 60 dB over the full measurement bandwidth and stabilizes a noisy fiber amplifier output to the shot-noise limit. Our results establish a scalable, wide-bandwidth paradigm for laser stabilization essential for high-throughput quantum technologies and deployable photonic sensing systems.
Broadband near-to-shot-noise suppression of the intensity noise from a continuous-wave (cw) fiber laser at 1550 nm is demonstrated at GHz-frequencies using feed-forward phase-matched destructive noise interference impressed onto the optical signal with a fiber electro-optic power modulator. The scheme is independent of the laser frequency and therefore is suitable for tunable lasers. It can be used with some modifications after an optical fiber-amplifier boosting a cw laser signal. A noise residual of down to 2 dB above the shot-noise was measured, which is about 2 dB below the prediction with a rigorous noise model. While the total laser noise can be removed, inclusive shot noise, because the latter is still 10 dB above the thermal noise, the power splitter introduces some partition noise above the shot level. In that case, a sub-shot-noise suppression scheme should be possible by replacing the photon anti-correlation of the power splitter by the co-correlation obtained from a paired photon or twin beam source.
Lasers with high spectral purity are indispensable for optical clocks and for the coherent manipulation of atomic and molecular qubits in applications such as quantum computing and quantum simulation. While the stabilization of such lasers to a reference can provide a narrow linewidth, the widely used diode lasers exhibit fast phase noise that prevents high-fidelity qubit manipulation. In this paper, we demonstrate a self-injection locked diode laser system that utilizes a high-finesse cavity. This cavity not only provides a stable resonance frequency, it also acts as a low-pass filter for phase noise beyond the cavity linewidth of around 100 kHz, resulting in low phase noise from dc to the injection lock limit. We model the expected laser performance and benchmark it using a single trapped 40 Ca + -ion as a spectrum analyzer. We show that the fast phase noise of the laser at relevant Fourier frequencies of 100 kHz to >2 MHz is suppressed to a noise floor of between −110 dBc/Hz and −120 dBc/Hz, an improvement of 20 to 30 dB over state-of-the-art Pound-Drever-Hall-stabilized extended-cavity diode lasers. This strong suppression avoids incoherent (spurious) spin flips during manipulation of optical qubits and improves laser-driven gates when using diode lasers in applications involving quantum logic spectroscopy, quantum simulation, and quantum computation.
Noise reduction of optical pulses using variable spectral filters and optical fibers in the anomalous dispersion region is investigated numerically and experimentally. In the numerical analysis, quantum noise evolution of the optical pulse is calculated using a quantized nonlinear Schrödinger equation and linearization approximation. It is shown that when the optical spectrum is in the broadening process, photon-number squeezing can be obtained using a band-pass filter. On the other hand, when the optical spectrum is in the narrowing process, a correlated pulse pair is generated using a band-rejection filter and photon number squeezing can be also observed. In the experiment, the characteristics of noise reduction of optical pulses are investigated using a passively mode-locked fiber laser at 1.55 µm and a variable spectral filter. Noise distribution of optical pulses changes periodically as the fiber input power is changed. Intensity noise of the fiber laser is reduced by as much as 23 dB using the band-pass filter and is slightly reduced below the shot noise level. Using the band-rejection filter, the noise reduction by the correlated pulse pair is confirmed. The characteristics of the experimental results are almost in agreement with those of the numerical ones.