Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Ultrasensitive radio-frequency pseudomorphic high-electron-mobility-transistor readout for quantum devices

Nikolai Oukhanski, Eckhardt Hoenig

Published Oct 4, 2004• 18 citations
Publisher

Abstract

Two versions of a cryogenic multistage pseudomorphic high-electron-mobility field-effect transistor amplifier (based on the AlGaAs/InGaAs/GaAs heterostructure) have been designed for quantum device readout and tested at an ambient temperature ∼380mK. The minimum noise temperature of the first amplifier version is below 110±25mK(∼80±20hf∕kB) at 28.6 MHz, estimated from the noise of input 10 kΩ resistance and coupled input tank circuit with an active resistance at the resonant frequency RS(f0)≈17.9kΩ. Its minimum voltage spectral noise density, with respect to the input, is about 200pV∕(Hz)1∕2 and the corner frequency of the 1∕f noise is close to 300 kHz. For the amplifier with the lowest designed back action, the minimum noise temperature below 130±30mK(∼100±25hf∕kB) at 26.8 MHz was estimated when coupled to an input tank circuit with RS(f0)≈61.8kΩ. The power consumption of the amplifiers is in the range of 100–600 μW.

DOI
10.1063/1.1790598

Related papers

An rf Quantum Capacitance Parametric Amplifier

Abdallah El Kass, C. T. Jin, J. D. Watson +4 more

We demonstrate a radio-frequency parametric amplifier that exploits the gate-tunable quantum capacitance of an ultra high mobility two dimensional electron gas (2DEG) in a GaAs heterostructure at cryogenic temperatures. The prototype narrowband amplifier exhibits a gain greater than 20 dB up to an input power of - 66 dBm (1 dB compression), and a noise temperature TN of 1.3 K at 370 MHz. In contrast to superconducting amplifiers, the quantum capacitance parametric amplifier (QCPA) is operable at tesla-scale magnetic fields and temperatures ranging from milli kelvin to a few kelvin. These attributes, together with its low power (microwatt) operation when compared to conventional transistor amplifiers, suggest the QCPA may find utility in enabling on-chip integrated readout circuits for semiconductor qubits or in the context of space transceivers and radio astronomy instruments.

arXiv:2304.13227•Apr 26, 2023•2 citations

A C-band cryogenic gallium arsenide low-noise amplifier for quantum applications

Ziqing Guo, Daxiong Sun, Peisheng Huang +16 more

Large-scale superconducting quantum computers require massive numbers of high-performance cryogenic low-noise amplifiers (cryo-LNAs) for qubit readout. Here we presented a C-band monolithic microwave integrated circuit (MMIC) cryo-LNA for this purpose. This cryo-LNA is based on a 150 nm gallium arsenide (GaAs) pseudomorphic high electron mobility transistor (pHEMT) process and implemented with a three-stage cascaded architecture, where the first stage adopts careful impedance matching to optimize the noise and return loss. The integration of negative feedback loops adopted in the second and third stages enhances the overall stability. Moreover, the pHEMT self-bias and current multiplexing circuitry structure facilitate the reduction of power consumption and require only a single bias line. Operating at an ambient temperature of 3.6 K and consuming 15 mW, the cryo-LNA demonstrates good performance in the C-band, reaching a minimum noise temperature of 4 K and an average gain of 40 dB. We further benchmarked this cryo-LNA with superconducting qubits, achieving an average single-shot dispersive readout fidelity of 98.3% without assistance from a quantum-limited parametric amplifier. The development of GaAs cryo-LNA diversifies technical support necessary for large-scale quantum applications.

arXiv:2412.19477•Chip•Apr 6, 2025•3 citations

Single shot spin readout using a cryogenic high-electron-mobility transistor amplifier at sub-Kelvin temperatures

Lisa A Tracy, Dwight Luhman, Stephen M Carr +6 more

We use a cryogenic high-electron-mobility transistor circuit to amplify the current from a single electron transistor, allowing for demonstration of single shot readout of an electron spin on a single P donor in Si with 100 kHz bandwidth and a signal to noise ratio of ∼9. In order to reduce the impact of cable capacitance, the amplifier is located adjacent to the Si sample, at the mixing chamber stage of a dilution refrigerator. For a current gain of ∼2.7×103, the power dissipation of the amplifier is 13 μW, the bandwidth is ∼1.3 MHz, and for frequencies above 300 kHz the current noise referred to input is ≤70 fA/Hz. With this amplification scheme, we are able to observe coherent oscillations of a P donor electron spin in isotopically enriched 28Si with 96% visibility.

Applied Physics Letters•Feb 8, 2016•60 citations

Sub-mW Cryogenic InP HEMT LNA for Qubit Readout

Yin Zeng, J. Stenarson, Peter J. Sobis +2 more

The cryogenic indium phosphide (InP) high-electron-mobility transistor (HEMT) low-noise amplifier (LNA) is used for the readout amplification of qubits at$4$K where cooling capabilities are limited implying that the dc power of the active circuits is an essential design constraint. In this article, the RF and noise performance of the InP HEMT under ultralow-power (ULP) operation at$4$K has been characterized. The small-signal and noise parameter model of the InP HEMT was extracted down to 1$\mu$W. The tradeoff between noise performance and dc power consumption was analyzed in terms of the drain current and drain voltage. A 4–6 GHz hybrid cryogenic HEMT LNA designed for qubit readout and optimized for lowest noise below$1$mW dc power consumption was fabricated. The measured performance of the LNA at$4$K attained 23.1 dB average gain and 2.0 K average noise temperature at 200$\mu$W dc power.

IEEE Transactions on Microwave Theory and Techniques•Sep 15, 2023•22 citations

Cryogenic Resonant Amplifier for Electron-on-Helium Image Charge Readout

M. A. Belyanchikov, Jakob A. Kraus, Denis Konstantinov

Abstract An electron-on-helium qubit is a promising physical platform for quantum information technologies. Among all the “blueprints” for the qubit realization, a hybrid Rydberg-spin qubit seems to be a promising one toward quantum computing using electron spins. The main technological challenge on the way to such qubits is a detection of fA range image current induced by a Rydberg transition of a single electron. To address this problem, we aim to use a tank LC-circuit in conjunction with a high-impedance and low power dissipation cryogenic amplifier. Here, we report our progress toward realization of a resonant image current detector with a homemade cryogenic amplifier based on FHX13LG HEMT. We present a detailed characterization of the transistor at room and cryogenic temperatures, as well as details of the amplifier design and performance. At the power dissipation level of amplifier well below 100 μW, the measured voltage and current noise level are $$0.6~{\hbox {nV}}/\sqrt{\textrm{Hz}}$$ 0.6 nV / Hz and below 1.5 fA/ $$\sqrt{\textrm{Hz}}$$ Hz , respectively. Based on the actual image current measurements of the Rydberg transition in a many-electron system on liquid helium, we estimate an SNR = 8 with a measurement bandwidth 1 Hz for the detection of a single-electron transition, providing the noise level at the output is solely determined by the noise of the amplifier.

arXiv:2311.04437•Journal of Low Temperature Physics•Jan 19, 2024•6 citations

Radio-frequency amplifier with tenth-kelvin noise temperature based on a microstrip direct current superconducting quantum interference device

Marc-Olivier André, Michael Mück, John L. Clarke +2 more

A dc superconducting quantum interference device (SQUID) with a resonant microstrip input and a cooled heterostructure field-effect transistor as a postamplifier is used as a radio-frequency amplifier in the frequency range 90–500 MHz. At liquid He3 temperatures, gains of 24 and 20 dB and intrinsic noise temperatures of 0.06±0.02 and 0.12±0.10 K were achieved at 89.6 and 438 MHz, respectively. The system noise temperature at 438 MHz was also estimated from the Nyquist noise produced by a resonant circuit coupled to the input of the microstrip SQUID.

Applied Physics Letters•Aug 2, 1999•38 citations
Two versions of a cryogenic multistage pseudomorphic high-electron-mobility field-effect transistor amplifier (based on the AlGaAs/InGaAs/GaAs heterostructure) have been designed for quantum device readout and tested at an ambient temperature ∼380mK. The minimum noise temperature of the first amplifier version is below 110±25mK(∼80±20hf∕kB) at 28.6 MHz, estimated from the noise of input 10 kΩ resistance and coupled input tank circuit with an active resistance at the resonant frequency RS(f0)≈17.9kΩ. Its minimum voltage spectral noise density, with respect to the input, is about 200pV∕(Hz)1∕2 and the corner frequency of the 1∕f noise is close to 300 kHz. For the amplifier with the lowest designed back action, the minimum noise temperature below 130±30mK(∼100±25hf∕kB) at 26.8 MHz was estimated when coupled to an input tank circuit with RS(f0)≈61.8kΩ. The power consumption of the amplifiers is in the range of 100–600 μW.
We demonstrate a radio-frequency parametric amplifier that exploits the gate-tunable quantum capacitance of an ultra high mobility two dimensional electron gas (2DEG) in a GaAs heterostructure at cryogenic temperatures. The prototype narrowband amplifier exhibits a gain greater than 20 dB up to an input power of - 66 dBm (1 dB compression), and a noise temperature TN of 1.3 K at 370 MHz. In contrast to superconducting amplifiers, the quantum capacitance parametric amplifier (QCPA) is operable at tesla-scale magnetic fields and temperatures ranging from milli kelvin to a few kelvin. These attributes, together with its low power (microwatt) operation when compared to conventional transistor amplifiers, suggest the QCPA may find utility in enabling on-chip integrated readout circuits for semiconductor qubits or in the context of space transceivers and radio astronomy instruments.
Large-scale superconducting quantum computers require massive numbers of high-performance cryogenic low-noise amplifiers (cryo-LNAs) for qubit readout. Here we presented a C-band monolithic microwave integrated circuit (MMIC) cryo-LNA for this purpose. This cryo-LNA is based on a 150 nm gallium arsenide (GaAs) pseudomorphic high electron mobility transistor (pHEMT) process and implemented with a three-stage cascaded architecture, where the first stage adopts careful impedance matching to optimize the noise and return loss. The integration of negative feedback loops adopted in the second and third stages enhances the overall stability. Moreover, the pHEMT self-bias and current multiplexing circuitry structure facilitate the reduction of power consumption and require only a single bias line. Operating at an ambient temperature of 3.6 K and consuming 15 mW, the cryo-LNA demonstrates good performance in the C-band, reaching a minimum noise temperature of 4 K and an average gain of 40 dB. We further benchmarked this cryo-LNA with superconducting qubits, achieving an average single-shot dispersive readout fidelity of 98.3% without assistance from a quantum-limited parametric amplifier. The development of GaAs cryo-LNA diversifies technical support necessary for large-scale quantum applications.
We use a cryogenic high-electron-mobility transistor circuit to amplify the current from a single electron transistor, allowing for demonstration of single shot readout of an electron spin on a single P donor in Si with 100 kHz bandwidth and a signal to noise ratio of ∼9. In order to reduce the impact of cable capacitance, the amplifier is located adjacent to the Si sample, at the mixing chamber stage of a dilution refrigerator. For a current gain of ∼2.7×103, the power dissipation of the amplifier is 13 μW, the bandwidth is ∼1.3 MHz, and for frequencies above 300 kHz the current noise referred to input is ≤70 fA/Hz. With this amplification scheme, we are able to observe coherent oscillations of a P donor electron spin in isotopically enriched 28Si with 96% visibility.
The cryogenic indium phosphide (InP) high-electron-mobility transistor (HEMT) low-noise amplifier (LNA) is used for the readout amplification of qubits at444K where cooling capabilities are limited implying that the dc power of the active circuits is an essential design constraint. In this article, the RF and noise performance of the InP HEMT under ultralow-power (ULP) operation at444K has been characterized. The small-signal and noise parameter model of the InP HEMT was extracted down to 1μ\muμW. The tradeoff between noise performance and dc power consumption was analyzed in terms of the drain current and drain voltage. A 4–6 GHz hybrid cryogenic HEMT LNA designed for qubit readout and optimized for lowest noise below111mW dc power consumption was fabricated. The measured performance of the LNA at444K attained 23.1 dB average gain and 2.0 K average noise temperature at 200μ\muμW dc power.
Abstract An electron-on-helium qubit is a promising physical platform for quantum information technologies. Among all the “blueprints” for the qubit realization, a hybrid Rydberg-spin qubit seems to be a promising one toward quantum computing using electron spins. The main technological challenge on the way to such qubits is a detection of fA range image current induced by a Rydberg transition of a single electron. To address this problem, we aim to use a tank LC-circuit in conjunction with a high-impedance and low power dissipation cryogenic amplifier. Here, we report our progress toward realization of a resonant image current detector with a homemade cryogenic amplifier based on FHX13LG HEMT. We present a detailed characterization of the transistor at room and cryogenic temperatures, as well as details of the amplifier design and performance. At the power dissipation level of amplifier well below 100 μW, the measured voltage and current noise level are 0.6 nV/Hz0.6~{\hbox {nV}}/\sqrt{\textrm{Hz}}0.6 nV/Hz​ 0.6 nV / Hz and below 1.5 fA/ Hz\sqrt{\textrm{Hz}}Hz​ Hz , respectively. Based on the actual image current measurements of the Rydberg transition in a many-electron system on liquid helium, we estimate an SNR = 8 with a measurement bandwidth 1 Hz for the detection of a single-electron transition, providing the noise level at the output is solely determined by the noise of the amplifier.
A dc superconducting quantum interference device (SQUID) with a resonant microstrip input and a cooled heterostructure field-effect transistor as a postamplifier is used as a radio-frequency amplifier in the frequency range 90–500 MHz. At liquid He3 temperatures, gains of 24 and 20 dB and intrinsic noise temperatures of 0.06±0.02 and 0.12±0.10 K were achieved at 89.6 and 438 MHz, respectively. The system noise temperature at 438 MHz was also estimated from the Nyquist noise produced by a resonant circuit coupled to the input of the microstrip SQUID.