Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Underdamped long Josephson junction coupled to overdamped single-flux-quantum circuits

Y. M. Zhang, V. Borzenets, V. K. Kaplunenko, Noshir Dubash

Published Sep 29, 1997• 12 citations
Publisher

Abstract

We report a circuit that integrates an underdamped long Josephson junction with overdamped single-flux-quantum (SFQ) circuits. We confirm that the resonant soliton modes in the long junction are not affected by SFQ cells coupled to the junction, and demonstrate that the radiation frequency and linewidth of the soliton resonances can be measured with SFQ T-flip-flops. Our experimental results also show that a 4π quantum mechanical phase leap at the end of the long junction, which is due to the reflection of a soliton, creates two single flux quanta propagating in the overdamped Josephson transmission line.

DOI
10.1063/1.119423

Related papers

Modeling of a long Josephson junction coupled to SFQ elements

Yongming Zhang

By combining a long Josephson junction (LJJ) with single-flux-quantum (SFQ) circuits, new digital applications for long junctions can be explored. To fully investigate the dynamics of the hybrid LJJ/SFQ circuits, a numerical model was developed for an unshunted long junction coupled to shunted SFQ Josephson transmission line (JTL) through superconducting strips. The model is based on a one-dimensional array of Josephson junctions that is described by a set of discrete sine-Gordon equations. Simulations support our experimental observation that the first zero-field step can exist when the LJJ is terminated by SFQ elements. The influences on the first zero-field step by the self-inductance, the critical current, and the shunt resistance of JTL cells are studied in detail. Simulation also confirms that each 4/spl pi/ phase leap at the end of the long junction creates two separated SFQ pulses after several overdamped JTL cells.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•2 citations

Single flux quantum circuits with damping based on dissipative transmission lines

E M Tolkacheva, D V Balashov, M I Khabipov +1 more

We propose and demonstrate the functioning of a special Rapid Single Flux Quantum (RSFQ) circuit with frequency-dependent damping. This damping is achieved by shunting individual Josephson junctions by pieces of open-ended RC transmission lines. Our circuit includes a toggle flip-flop cell, Josephson transmission lines transferring single flux quantum pulses to and from this cell, as well as DC/SFQ and SFQ/DC converters. Due to the desired frequency-dispersion in the RC line shunts which ensures sufficiently low noise at low frequencies, such circuits are well-suited for integrating with the flux/phase Josephson qubit and enable its efficient control.

arXiv:0804.0442•Superconductor Science and Technology•Oct 17, 2008•3 citations

Demonstration of Interface Circuits Between Half- and Single- Flux- Quantum Circuits

Daiki Hasegawa, Yuto Takeshita, Feng Li +4 more

We demonstrated interface circuits between a half-flux-quantum (HFQ) circuit and a rapid single-flux-quantum (RSFQ) circuit to obtain SFQ/HFQ and HFQ/SFQ converters. These converters were created by simply inserting a resistor between an RSFQ circuit and the adjacent HFQ circuit, where both circuits are based on pulse logic. These converters enable us to create combinatory circuits that make the best use of the features of the two circuits. Using a DC/SFQ, SFQ/HFQ, HFQ/SFQ, and SFQ/DC converter, we measure an HFQ Josephson transmission line (JTL) composed of eight 0-0-π superconducting quantum interference devices (SQUIDs), which are the essential elements of an HFQ circuit. The 0-0-π SQUIDs are composed of two conventional Josephson junctions and a π-shifted ferromagnetic junction. The HFQ JTL demonstrated in this study is driven by a bias current 11-fold lower than that of a similar RSFQ JTL. These experimental results indicate that the HFQ circuit requires power that is two or more orders of magnitude lower than that of an RSFQ circuit.

IEEE Transactions on Applied Superconductivity•Apr 14, 2021•18 citations

Fluxon interaction in an overdamped Josephson transmission line

V. K. Kaplunenko

We have simulated fluxon propagation within a Josephson transmission line that is one of the elements of a rapid single flux quantum (RSFQ) circuit. This line is a parallel connection of damped Josephson junctions coupled by superconducting inductances. Geometries with and without mutual inductances between neighboring cells are considered. If the time interval between two fluxons is less than 0.3 φ0Vc−1 (Vc characteristic voltage) a repulsion between them was observed. The repulsion sets a specific time delay between the fluxons that impose a rigid limitation for high frequency performance of RSFQ logic. The delay depends on the shunting parameter, bias current, and values of interconnecting inductances.

Applied Physics Letters•Jun 12, 1995•47 citations

A single flux quantum circuit with a ferromagnet-based Josephson π-junction

M. Khabipov, D Balashov, F. Maibaum +5 more

We report on the functionality of a Nb-based superconducting single flux quantum (SFQ) toggle flip-flop (TFF) circuit, comprising a complementary superconductor–ferromagnet–superconductor (SFS) Josephson π-junction. The SFS junction was used as a phase shifting element inserted in the storage loop of the TFF. The fabricated circuits demonstrated correct functionality with the operation parameter ranges of ± 20%. The application of SFS π-junctions makes the SFQ circuits very compact, may substantially improve their stability, and may also be suitable for integration with Josephson quantum circuits (qubits).

Superconductor Science and Technology•Mar 19, 2010•66 citations

Single flux quantum digital devices

V. P. Koshelets

A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.

Superconductor Science and Technology•Nov 1, 1991•5 citations
We report a circuit that integrates an underdamped long Josephson junction with overdamped single-flux-quantum (SFQ) circuits. We confirm that the resonant soliton modes in the long junction are not affected by SFQ cells coupled to the junction, and demonstrate that the radiation frequency and linewidth of the soliton resonances can be measured with SFQ T-flip-flops. Our experimental results also show that a 4π quantum mechanical phase leap at the end of the long junction, which is due to the reflection of a soliton, creates two single flux quanta propagating in the overdamped Josephson transmission line.
By combining a long Josephson junction (LJJ) with single-flux-quantum (SFQ) circuits, new digital applications for long junctions can be explored. To fully investigate the dynamics of the hybrid LJJ/SFQ circuits, a numerical model was developed for an unshunted long junction coupled to shunted SFQ Josephson transmission line (JTL) through superconducting strips. The model is based on a one-dimensional array of Josephson junctions that is described by a set of discrete sine-Gordon equations. Simulations support our experimental observation that the first zero-field step can exist when the LJJ is terminated by SFQ elements. The influences on the first zero-field step by the self-inductance, the critical current, and the shunt resistance of JTL cells are studied in detail. Simulation also confirms that each 4/spl pi/ phase leap at the end of the long junction creates two separated SFQ pulses after several overdamped JTL cells.
We propose and demonstrate the functioning of a special Rapid Single Flux Quantum (RSFQ) circuit with frequency-dependent damping. This damping is achieved by shunting individual Josephson junctions by pieces of open-ended RC transmission lines. Our circuit includes a toggle flip-flop cell, Josephson transmission lines transferring single flux quantum pulses to and from this cell, as well as DC/SFQ and SFQ/DC converters. Due to the desired frequency-dispersion in the RC line shunts which ensures sufficiently low noise at low frequencies, such circuits are well-suited for integrating with the flux/phase Josephson qubit and enable its efficient control.
We demonstrated interface circuits between a half-flux-quantum (HFQ) circuit and a rapid single-flux-quantum (RSFQ) circuit to obtain SFQ/HFQ and HFQ/SFQ converters. These converters were created by simply inserting a resistor between an RSFQ circuit and the adjacent HFQ circuit, where both circuits are based on pulse logic. These converters enable us to create combinatory circuits that make the best use of the features of the two circuits. Using a DC/SFQ, SFQ/HFQ, HFQ/SFQ, and SFQ/DC converter, we measure an HFQ Josephson transmission line (JTL) composed of eight 0-0-π superconducting quantum interference devices (SQUIDs), which are the essential elements of an HFQ circuit. The 0-0-π SQUIDs are composed of two conventional Josephson junctions and a π-shifted ferromagnetic junction. The HFQ JTL demonstrated in this study is driven by a bias current 11-fold lower than that of a similar RSFQ JTL. These experimental results indicate that the HFQ circuit requires power that is two or more orders of magnitude lower than that of an RSFQ circuit.
We have simulated fluxon propagation within a Josephson transmission line that is one of the elements of a rapid single flux quantum (RSFQ) circuit. This line is a parallel connection of damped Josephson junctions coupled by superconducting inductances. Geometries with and without mutual inductances between neighboring cells are considered. If the time interval between two fluxons is less than 0.3 φ0Vc−1 (Vc characteristic voltage) a repulsion between them was observed. The repulsion sets a specific time delay between the fluxons that impose a rigid limitation for high frequency performance of RSFQ logic. The delay depends on the shunting parameter, bias current, and values of interconnecting inductances.
We report on the functionality of a Nb-based superconducting single flux quantum (SFQ) toggle flip-flop (TFF) circuit, comprising a complementary superconductor–ferromagnet–superconductor (SFS) Josephson π-junction. The SFS junction was used as a phase shifting element inserted in the storage loop of the TFF. The fabricated circuits demonstrated correct functionality with the operation parameter ranges of ± 20%. The application of SFS π-junctions makes the SFQ circuits very compact, may substantially improve their stability, and may also be suitable for integration with Josephson quantum circuits (qubits).
A new generation of the Josephson digital circuits-rapid single flux quantum (RSFQ) devices-based on overdamped externally shunted high quality Nb-AlO x -Nb tunnel junctions have been designed, fabricated and experimentally investigated. All-refractory material 11-layer 5 mu m integrated technology has been successfully employed for the preparation of the RSFQ microcircuits. The T flip-flop has been demonstrated to operate properly up to clock frequencies of 100 GHz at 25% margins. The proper operation of the buffer stage for a one-directional SFQ pulse transmission at clock frequencies up to 125 GHz has been achieved. The possibilities to convert the information from the usual DC form to SFQ and vice versa have been demonstrated. An output signal in an SFQ/DC converter as high as 220 mu V has been measured. A new counter type A/D converter which includes a comparator and reversible binary counter with DC outputs has been fabricated and tested. The proposed ADC seems to be very promising for high-accuracy measurement of medium-bandwidth signals. The possibilities of creating a number of SFQ devices with outstanding parameters are discussed.