Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical review. B, Solid state

Electromagnetic Properties of Point-Contact Josephson-Junction Arrays

Terrence D. Clark

Published Jul 1, 1973• 80 citations
Publisher

Abstract

The interaction of point-contact Josephson-junction arrays with electromagnetic fields, both self-generated and externally applied, is considered. Data are presented which suggest that such point-contact arrays can enter a "correlated" state in which the voltage drops at each of the junctions across the array equal the Josephson value $\ensuremath{\hbar}\frac{{\ensuremath{\omega}}_{0}}{2e}$ or some multiple or submultiple of this value. The use of these and other types of weak-link arrays as radiation detectors is discussed.

DOI
10.1103/physrevb.8.137

Related papers

Microwave detector response of the Josephson junction arrays

G. A. Ovsyannikov, G.E. Babaian, V. N. Laptev +1 more

Microwave detector response ( eta ) for three types of superconducting structures-single edge-type Josephson junctions, arrays of series-connected junctions, and arrays of RF-series and DC parallel-connected junctions-were investigated in the frequency range 35-120 GHz. Experimental dependence of eta versus biasing voltage is mainly determined by the interaction of junctions in the array. The selective response, which means a narrow linewidth of Josephson radiation, is observed for the third type of superconducting structure in a small magnetic field changing the phase shift between closely-spaced junctions. These arrays have the advantage in coupling with the external microwave system.

IEEE Transactions on Magnetics•Mar 1, 1991•2 citations

High-Frequency Response of Josephson Point Contacts

Helmut Kanter, F. L. Vernon

For a current-driven Josephson junction shunted by an Ohmic resistance, the dc voltage response and impedance to external high-frequency currents is calculated with a second-order perturbation method based on the unperturbed solution for the time evolution of the voltage as given by Aslamazov and Larkin. The response is proportional to signal power and has three characteristic-frequency regions depending on whether the internal self-generated Josephson frequency, ω0, is larger than, equal to, or smaller than the signal frequency, ω. For ω0< or >ω the response could be expressed by easily observable parameters of the dc voltage-current characteristics. This permits comparison of the predictions with experimental results obtained on point-contact junctions whose dc characteristics were only approximately represented by the simple model chosen for analysis. For ω0≪ω the response is found to be proportional to (i) the slope of the dc characteristic, (ii) the inverse square of the applied frequency, (iii) the inverse battery current in terms of the critical current, and (iv) the voltage amplitude of the inherent Josephson oscillations. For ω0≫ω ``classical'' detection proportional to curvature is obtained. For ω0∼ω resonance detection occurs, which depends to a considerable degree on fluctuations of the average contact voltage. These predictions are in reasonable agreement with experiments in which point-contact junctions were illuminated with klystron radiation at 10 and 90 GHz. Evidence is presented that the voltage fluctuations limiting the resonance response are the result of noise generated in the junction. Comparison of the noise-equivalent power expected from the simple model with measured results suggests that parasitic elements, such as shunt capacity, are not negligible at 90 GHz.

Journal of Applied Physics•Jul 1, 1972•101 citations

Microwave coupling of frequency-locked Josephson junction arrays

Insang Song, Yongheum Eom, Gwangseo Park +2 more

A high temperature superconducting YBa2Cu3Oy array of five Josephson junctions designed with additional coupling lines has been developed to demonstrate the effects of frequency locking and impedance matching for applications such as oscillators, mixers, and detectors. The Josephson self-radiation power was directly detected by a superheterodyne receiver, and Shapiro steps were also measured. The Josephson self-radiation properties reveal good quality of phase locking and microwave coupling with external circuits. The maximum self-radiation power of our array is about 50 pW which is several ten times higher than that of a single Josephson junction, and its peak point exactly satisfies the Josephson current-voltage relation. The Shapiro-step measurements show that the behavior of current-voltage curve depends on the effective inductance of coupling lines which affects the total impedance of Josephson junction array and microwave coupling. The Josephson oscillation frequency was obtained up to about 880 GHz which is 73% of the maximum available frequency calculated from the characteristic voltage of the Josephson junctions. Experimental results show that this type of Josephson junction array can improve the Josephson self-radiation power and increase the maximum detectable frequency.

Applied Physics Letters•Jun 16, 1997•8 citations

Series-Connected Josephson-Effect Mixers For Millimeter-Wave Radiation

Hiroshi Ohta, Toshiaki Matsui, Bokuji Komiyama

Millimeterwave detectors have been made of a series-connected array of Josephson junctions. Each junction of the array responds in phase to radiation and therefore the series-connected array as a whole behaves as if it were a single Josephson junction. When the Josephson junctions have a high critical current density, the IF outputs have sharp peaks at the voltages V = 2NΔ/ne where N is the number of the Josephson junctions in series connection and n is an integer. The subharmonic energy gap structures in voltage-current curves of Josephson junctions come from the Andreev-reflection-assisted-tunneling according to the recent Arnold theories.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 18, 1988•1 citation

Josephson junctions in charge and phase picture Theory and applications

Juha Hassel

Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.

•Nov 9, 2004•0 citations

Superconducting Quantum Interference Devices

J. C. Gallop

Published document discusses devices which are based on weak-link Josephson elements that join superconductors. Links can take numerous forms, and circuitry utilizing links can perform many varied functions with unprecedented sensitivity. Theoretical review of Josephson's junctions include tunneling junctions, point contact devices, microbridges, and proximity-effect devices.

CRC Press eBooks•Oct 19, 2017•5 citations
The interaction of point-contact Josephson-junction arrays with electromagnetic fields, both self-generated and externally applied, is considered. Data are presented which suggest that such point-contact arrays can enter a "correlated" state in which the voltage drops at each of the junctions across the array equal the Josephson value \ensuremathℏ\ensuremathω02e\ensuremath{\hbar}\frac{{\ensuremath{\omega}}_{0}}{2e}\ensuremathℏ2e\ensuremathω0​​ or some multiple or submultiple of this value. The use of these and other types of weak-link arrays as radiation detectors is discussed.
Microwave detector response ( eta ) for three types of superconducting structures-single edge-type Josephson junctions, arrays of series-connected junctions, and arrays of RF-series and DC parallel-connected junctions-were investigated in the frequency range 35-120 GHz. Experimental dependence of eta versus biasing voltage is mainly determined by the interaction of junctions in the array. The selective response, which means a narrow linewidth of Josephson radiation, is observed for the third type of superconducting structure in a small magnetic field changing the phase shift between closely-spaced junctions. These arrays have the advantage in coupling with the external microwave system.
For a current-driven Josephson junction shunted by an Ohmic resistance, the dc voltage response and impedance to external high-frequency currents is calculated with a second-order perturbation method based on the unperturbed solution for the time evolution of the voltage as given by Aslamazov and Larkin. The response is proportional to signal power and has three characteristic-frequency regions depending on whether the internal self-generated Josephson frequency, ω0, is larger than, equal to, or smaller than the signal frequency, ω. For ω0< or >ω the response could be expressed by easily observable parameters of the dc voltage-current characteristics. This permits comparison of the predictions with experimental results obtained on point-contact junctions whose dc characteristics were only approximately represented by the simple model chosen for analysis. For ω0≪ω the response is found to be proportional to (i) the slope of the dc characteristic, (ii) the inverse square of the applied frequency, (iii) the inverse battery current in terms of the critical current, and (iv) the voltage amplitude of the inherent Josephson oscillations. For ω0≫ω ``classical'' detection proportional to curvature is obtained. For ω0∼ω resonance detection occurs, which depends to a considerable degree on fluctuations of the average contact voltage. These predictions are in reasonable agreement with experiments in which point-contact junctions were illuminated with klystron radiation at 10 and 90 GHz. Evidence is presented that the voltage fluctuations limiting the resonance response are the result of noise generated in the junction. Comparison of the noise-equivalent power expected from the simple model with measured results suggests that parasitic elements, such as shunt capacity, are not negligible at 90 GHz.
A high temperature superconducting YBa2Cu3Oy array of five Josephson junctions designed with additional coupling lines has been developed to demonstrate the effects of frequency locking and impedance matching for applications such as oscillators, mixers, and detectors. The Josephson self-radiation power was directly detected by a superheterodyne receiver, and Shapiro steps were also measured. The Josephson self-radiation properties reveal good quality of phase locking and microwave coupling with external circuits. The maximum self-radiation power of our array is about 50 pW which is several ten times higher than that of a single Josephson junction, and its peak point exactly satisfies the Josephson current-voltage relation. The Shapiro-step measurements show that the behavior of current-voltage curve depends on the effective inductance of coupling lines which affects the total impedance of Josephson junction array and microwave coupling. The Josephson oscillation frequency was obtained up to about 880 GHz which is 73% of the maximum available frequency calculated from the characteristic voltage of the Josephson junctions. Experimental results show that this type of Josephson junction array can improve the Josephson self-radiation power and increase the maximum detectable frequency.
Millimeterwave detectors have been made of a series-connected array of Josephson junctions. Each junction of the array responds in phase to radiation and therefore the series-connected array as a whole behaves as if it were a single Josephson junction. When the Josephson junctions have a high critical current density, the IF outputs have sharp peaks at the voltages V = 2NΔ/ne where N is the number of the Josephson junctions in series connection and n is an integer. The subharmonic energy gap structures in voltage-current curves of Josephson junctions come from the Andreev-reflection-assisted-tunneling according to the recent Arnold theories.
Properties of weak links between two superconductors, or Josephson junctions, make them interesting for fundamental physics research. Since their discovery over four decades ago, they have provided a unique way to study the behavior of the superconducting quantum phase. More recently, ultra small, or mesoscopic, Josephson junctions with substantial single Cooper pair charging energy have gained interest due to their behavior as macroscopic quantum objects. In addition to the theoretical interest, Josephson junctions can be used as active elements in circuit applications. Particularly, in this Thesis we study two different devices. We develop the required theoretical treatments, derive device properties, and compare the results with experimental data. The first application is a Josephson voltage standard based on externally damped Superconductor - Insulator - Superconductor junctions. It consists of an array of large Josephson junctions connected in series and irradiated with a 70 GHz microwave signal. Phase locking the Josephson dynamics into the signal leads to the quantization of the voltage. This is utilized in metrology. We introduce a new circuit solution based on frequency dependent damping of the junctions. Optimization and some designs for practical arrays are presented. The purpose is to find such a design that the array is fast, has low power consumption and is as stable as possible. Arrays able to generate DC voltages of order 1 volt with metrological accuracy are demonstrated experimentally and their applicability in AC voltage calibrations is analyzed. The second application is the Bloch Oscillating Transistor (BOT). The BOT is based on controlling the Cooper pair current in an ultra small Josephson junction by means of quasiparticles tunneling through a normal junction. As part of the thesis work, the principle of operation is first demonstrated computationally. The model is then refined to yield quantitative predictions of the characteristics. Finally, an analytic theory for the device is developed and the properties as an amplifier are derived.