Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Noise study of a high-T c Josephson junction under near-millimeter-wave irradiation

R. Gupta, Qing Hu, D. Terpstra, G.J. Gerritsma, Horst Rogalla

Published Feb 14, 1994• 8 citations
Publisher

Abstract

Noise studies of both the dc and ac Josephson effects have been performed on a high-Tc ramp-type Josephson junction irradiated at 176 GHz. Well-established analytical results for noise in overdamped RSJs are used to model the measured I-V characteristics, and their agreement is excellent. Noise-rounded I-V curves at the critical current and the first and second Shapiro steps under coherent 176 GHz radiation have been studied in detail at several temperatures and rf power levels. The noise temperatures inferred from these simulations are close to the physical temperatures. An increase of noise temperatures at high radiation power levels is a result of radiation heating, which could be due to a bolometric effect.

DOI
10.1063/1.110974

Related papers

Near-millimeter-wave response of high T c ramp-type Josephson junctions

R. Gupta, Qing Hu, D. Terpstra +2 more

We have studied the response of a YBCO/PBCO/YBCO ramp-type junction to coherent radiation at 176 and 270 GHz. The I-V characteristic of the junction closely resembles the prediction of the RSJ model. The IcRn product of the junction is 0.25 mV at 5 K. The millimeter-wave radiation is coupled to the junction via a quasioptical structure that focuses the radiation onto the junction through a yttrium-stabilized ZrO2 substrate. At 176 GHz, we have observed as many as six Shapiro steps at the maximum power level of our Gunn oscillator-pumped frequency doubler. Shapiro steps are still clearly seen up to 65 K. The amplitudes of the zeroth, first, and second Shapiro steps, as functions of the square root of the radiation power, agree remarkably well with a Bessel function fit, indicating the junction is voltage-biased at the radiation frequency (rf). At 270 GHz, due to a combination of the heavy rf loss in the ZrO2 substrate and the lack of radiation power, we have observed only the first Shapiro step.

Applied Physics Letters•Jun 21, 1993•10 citations

Simulation of effect of microwave irradiation on I-V characteristics of Josephson junction using RCLSJ model with noise into consideration

Mohammed Shahabuddin

I-V characteristics of Josephson junction (JJ) under microwave irradiation is simulated taking the resistance, capacitance and inductance of the junction (RCLSJ) into account. Since most of the JJ made with high TC material operates at high temperature where the thermal fluctuation is playing significant role. In the present simulation, thermal noise is also taken into consideration and simulated result explains the rounding behaviour of the Shapiro step observed in the experimental I-V curve. The simulated results also confirm the growing of Shapiro steps with increasing microwave power. This model also clearly account for the appearance of broad minima and reduction of the maxima in the power dependence of the step amplitude ΔIn/2Ic as observed in the experimental data of Kautz et al. (1992).

International Journal of Nano and Biomaterials•Jan 1, 2009•0 citations

Simulation and measurement of millimeter-wave radiation from Josephson junction array*

Xin Zhang, Shenghui Zhao, Litian Wang +8 more

We report the circuit simulations and experiments of millimeter-wave radiation from a high temperature superconducting (HTS) bicrystal Josephson junction (BJJ) array. To study the effects of junction characteristic parameters on radiation properties, new radiation circuit models are proposed in this paper. The series resistively and capacitively shunted junction (RCSJ) models are packaged into a Josephson junction array (JJA) model in the simulation. The current-voltage characteristics (IVCs) curve and radiation peaks are simulated and analyzed by circuit models, which are also observed from the experiment at liquid nitrogen temperature. The experimental radiation linewidth and power are in good agreement with simulated results. The presented circuit models clearly demonstrate that the inconsistency of the JJA will cause a broad linewidth and a low detected power. The junction radiation properties are also investigated at the optimal situation by circuit simulation. The results further confirm that the consistent JJA characteristic parameters can successfully narrow the radiation linewidth and increase the power of junction radiation.

Chinese Physics B•Jun 1, 2019•1 citation

Submillimeter wave response of a high T c superconducting microbridge

Jun-ichi Takeya, Etsuo Kawate, Chan Hoon Park +1 more

We observed the ac Josephson effect, the ‘‘Shapiro step,’’ at the high frequency of 584 GHz in an YBa2Cu3O7−δ grain boundary Josephson junction at 4.2 K for the first time. This Shapiro step grew to about 8% of the critical current without irradiation. We also noted that the critical current was gradually suppressed with increasing power. The critical current with irradiation was suppressed to about 97% of the critical current without irradiation. Detailed investigation revealed the consistency between the above two phenomena.

Applied Physics Letters•Nov 23, 1992•6 citations

Subharmonic Shapiro steps and noise in high-T c superconductor Josephson junctions

Michael A. Tarasov, Dmitry S. Golubev, Vitaly S. Shumeiko +4 more

An experimental investigation is made of the subharmonic Shapiro steps observed on the I-V curves of high-T c superconductor Josephson junctions and on the bias-voltage dependences of the rf noise and detector response when the junctions are subjected to external submillimeter radiation. Structures of this type are ordinarily described by a nonsinusoidal current-phase relation, which is why subharmonic steps appear. Numerical modeling of the processes occurring in a Josephson junction by means of a simple current-phase relation, as in the case of an SNS junction, gives good agreement with experiment. The width of the characteristic Josephson generation line of the junction was estimated on the basis of the noise dependences and the selective detector response. The width can be explained by taking into account the shot noise of the tunneling component of the conductivity. A model of the conductivity of a high-T c superconductor Josephson junction, consisting of a tunnel junction with microshorts possessing metallic conductivity, is discussed.

Journal of Experimental and Theoretical Physics Letters•Sep 1, 1998•19 citations

Linewidth of Josephson oscillations in YBa/sub 2/Cu/sub 3/O/sub 7-x/ grain-boundary junctions

Yu. Ya. Divin, J. Mygind, N. F. Pedersen +1 more

The AC Josephson effect in YBa/sub 2/Cu/sub 3/O/sub 7-x/ grain-boundary junctions (GBJs) was studied in the temperature range from 4 K to 90 K. The temperature dependence of the linewidth of millimeter-wave Josephson oscillations was measured, and it is shown that the derived effective noise temperature of GBJ might be as low as the physical temperature in the temperature range investigated. This makes it possible to use the resistively shunted junction (RSJ) model with thermal fluctuations to get a limiting performance of high-T/sub c/ devices utilizing the AC Josephson effect. The lowest value of the linewidth of 72 GHz Josephson oscillations observed at 77 K was equal to 380 MHz, which demonstrates the applicability of GBJ, particularly in the field of radiation spectroscopy, even at liquid nitrogen temperatures.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•7 citations
Noise studies of both the dc and ac Josephson effects have been performed on a high-Tc ramp-type Josephson junction irradiated at 176 GHz. Well-established analytical results for noise in overdamped RSJs are used to model the measured I-V characteristics, and their agreement is excellent. Noise-rounded I-V curves at the critical current and the first and second Shapiro steps under coherent 176 GHz radiation have been studied in detail at several temperatures and rf power levels. The noise temperatures inferred from these simulations are close to the physical temperatures. An increase of noise temperatures at high radiation power levels is a result of radiation heating, which could be due to a bolometric effect.
We have studied the response of a YBCO/PBCO/YBCO ramp-type junction to coherent radiation at 176 and 270 GHz. The I-V characteristic of the junction closely resembles the prediction of the RSJ model. The IcRn product of the junction is 0.25 mV at 5 K. The millimeter-wave radiation is coupled to the junction via a quasioptical structure that focuses the radiation onto the junction through a yttrium-stabilized ZrO2 substrate. At 176 GHz, we have observed as many as six Shapiro steps at the maximum power level of our Gunn oscillator-pumped frequency doubler. Shapiro steps are still clearly seen up to 65 K. The amplitudes of the zeroth, first, and second Shapiro steps, as functions of the square root of the radiation power, agree remarkably well with a Bessel function fit, indicating the junction is voltage-biased at the radiation frequency (rf). At 270 GHz, due to a combination of the heavy rf loss in the ZrO2 substrate and the lack of radiation power, we have observed only the first Shapiro step.
I-V characteristics of Josephson junction (JJ) under microwave irradiation is simulated taking the resistance, capacitance and inductance of the junction (RCLSJ) into account. Since most of the JJ made with high TC material operates at high temperature where the thermal fluctuation is playing significant role. In the present simulation, thermal noise is also taken into consideration and simulated result explains the rounding behaviour of the Shapiro step observed in the experimental I-V curve. The simulated results also confirm the growing of Shapiro steps with increasing microwave power. This model also clearly account for the appearance of broad minima and reduction of the maxima in the power dependence of the step amplitude ΔIn/2Ic as observed in the experimental data of Kautz et al. (1992).
We report the circuit simulations and experiments of millimeter-wave radiation from a high temperature superconducting (HTS) bicrystal Josephson junction (BJJ) array. To study the effects of junction characteristic parameters on radiation properties, new radiation circuit models are proposed in this paper. The series resistively and capacitively shunted junction (RCSJ) models are packaged into a Josephson junction array (JJA) model in the simulation. The current-voltage characteristics (IVCs) curve and radiation peaks are simulated and analyzed by circuit models, which are also observed from the experiment at liquid nitrogen temperature. The experimental radiation linewidth and power are in good agreement with simulated results. The presented circuit models clearly demonstrate that the inconsistency of the JJA will cause a broad linewidth and a low detected power. The junction radiation properties are also investigated at the optimal situation by circuit simulation. The results further confirm that the consistent JJA characteristic parameters can successfully narrow the radiation linewidth and increase the power of junction radiation.
We observed the ac Josephson effect, the ‘‘Shapiro step,’’ at the high frequency of 584 GHz in an YBa2Cu3O7−δ grain boundary Josephson junction at 4.2 K for the first time. This Shapiro step grew to about 8% of the critical current without irradiation. We also noted that the critical current was gradually suppressed with increasing power. The critical current with irradiation was suppressed to about 97% of the critical current without irradiation. Detailed investigation revealed the consistency between the above two phenomena.
An experimental investigation is made of the subharmonic Shapiro steps observed on the I-V curves of high-T c superconductor Josephson junctions and on the bias-voltage dependences of the rf noise and detector response when the junctions are subjected to external submillimeter radiation. Structures of this type are ordinarily described by a nonsinusoidal current-phase relation, which is why subharmonic steps appear. Numerical modeling of the processes occurring in a Josephson junction by means of a simple current-phase relation, as in the case of an SNS junction, gives good agreement with experiment. The width of the characteristic Josephson generation line of the junction was estimated on the basis of the noise dependences and the selective detector response. The width can be explained by taking into account the shot noise of the tunneling component of the conductivity. A model of the conductivity of a high-T c superconductor Josephson junction, consisting of a tunnel junction with microshorts possessing metallic conductivity, is discussed.
The AC Josephson effect in YBa/sub 2/Cu/sub 3/O/sub 7-x/ grain-boundary junctions (GBJs) was studied in the temperature range from 4 K to 90 K. The temperature dependence of the linewidth of millimeter-wave Josephson oscillations was measured, and it is shown that the derived effective noise temperature of GBJ might be as low as the physical temperature in the temperature range investigated. This makes it possible to use the resistively shunted junction (RSJ) model with thermal fluctuations to get a limiting performance of high-T/sub c/ devices utilizing the AC Josephson effect. The lowest value of the linewidth of 72 GHz Josephson oscillations observed at 77 K was equal to 380 MHz, which demonstrates the applicability of GBJ, particularly in the field of radiation spectroscopy, even at liquid nitrogen temperatures.>