Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Josephson spectroscopy at submillimetre waves

Michael A. Tarasov, A. Shul’man, N Solopov, O. Y. Polyansky, Alexander N. Vystavkin, E.L. Kosarev, Dmitry S. Golubev, Е. А. Степанцов, Marian Darula, Oliver Harnack, Z. G. Ivanov

Published Nov 1, 1999• 4 citations
Publisher

Abstract

An HTS Josephson spectrometer has been designed, fabricated and experimentally studied. The spectrometer circuit consists of a YBCO bicrystal Josephson junction integrated with a double-slot or log-periodic antenna, connected in parallel with a gold low-inductance shunt. The selective detector response and RF response at intermediate frequency f IF = 1.4 GHz were measured in the signal frequency range f s = 400-1250 GHz and the linewidth of Josephson oscillations (LJO) was determined by using three different methods. (1) The Hilbert spectroscopy approach was used in the processing of the selective detector response. (2) In case of f IF < LJO the detector and RF responses have similar shapes, allowing the spectrum and LJO to be extracted from the RF response and even processing by modified Hilbert spectroscopy. (3) The RF response at f IF > LJO corresponds to the frequency down-conversion in a self-pumped Josephson mixer mode. For the processing of the RF response in the high f IF limit we suggest a novel method that allows extraction of the signal spectrum by means of simple operations: shifting, summing and subtracting. The advantage of the RF response method is in its simplicity and higher sensitivity that allows it to be proposed for spectroscopy applications.

DOI
10.1088/0953-2048/12/11/389

Related papers

Submillimeter-wave Josephson spectroscopy

Michael A. Tarasov, A. Shul’man, O. Yu. Polyanskii +7 more

A Josephson high-temperature superconducting (HTSC) submillimeter-wave spectrometer is designed, built, and experimentally investigated. The integrated detection structure of the spectrometer includes a YBCO Josephson junction on a bicrystalline boundary, a double-slot or log-periodic antenna, and a low-inductance resistive shunt. The selective detector response and the response at an intermediate frequency of 1.4 GHz are measured under the action of a signal in the frequency range 350–1250 GHz. Three methods of spectroscopy are investigated using this setup: 1) a method of Hilbert spectroscopy with processing of the detector response is implemented; 2) it is found that for a wide Josephson line at intermediate frequency (IF) the response has the same form as the detector response, making it possible to obtain a spectrum and the width of the generation line from IF response measurements; 3) for a narrow Josephson line the IF response corresponds to the regime of conversion with self-pumping. A new method is proposed for calculating the emission spectrum. The method consists of simple shift, summation, and subtraction operations. The advantages of the method are simplicity, high sensitivity, and high resolution.

Journal of Experimental and Theoretical Physics Letters•Sep 1, 1999•4 citations

Submillimeter-wave mixing and noise in HTS Josephson junctions

Michael A. Tarasov, Е. А. Степанцов, Dmitry S. Golubev +6 more

A Josephson quasioptical detector comprising YBaCuO junction on bicrystal MgO substrate, integrated log-periodic Au antenna, MgO extended hyperhemisphere lens attached to the substrate and 1.4 GHz cold amplifier with cold circulator has been designed, fabricated and experimentally studied. We fabricated several integrated Josephson junctions 1-2 /spl mu/m wide which at 4.2 K demonstrate RSJ IV curves with critical currents 100-300 /spl mu/A and normal resistance of 10-20 /spl Omega/. The noise temperature (T/sub N/) at 4.2 K and 330 GHz measured by a hot/cold load method in fundamental mixing mode with external BWO local oscillator brings T/sub N/=1100 K for the junction shunted by low-inductance resistive shunt and T/sub N/=1400 K without shunting. At bath temperatures of 20-40 K the noise temperature was in the range 1500-3000 K, at 50 K the noise temperature was below 2000 K, and at 60-70 K increased over 3000 K in the frequency range 310-586 GHz. The noise temperatures measured in the self-pumping mode vary between 580-2300 K with dc bias in the range 0.1-0.5 mV. The linewidth of Josephson oscillations has been extracted from a selective detector response and IF noise voltage dependence. The measured excess noise can be attributed to shot noise and multiple Andreev reflection in pinholes with Ss'S structure. We observed small subharmonic steps in IV curve and noise dependencies, which are typical for SNS junctions.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•8 citations

Bandwidth and Noise of Submillimeter Wave Cuprate Bicrystal Josephson Junction Detectors

G. A. Ovsyannikov, I. V. Borisenko, K. Y. Constantinian +8 more

Detectors made from superconducting cuprate YBa/sub 2/Cu/sub 3/O/sub x/ bicrystal Josephson junctions (BJJs) on sapphire and NdGaO/sub 3/ substrates have been fabricated and characterized in the frequency band 200-900 GHz. Junctions on sapphire substrates had a normal state resistance R/sub N//spl ap/15-60 /spl Omega/, and I/sub C/R/sub N/ product up to 2.5 mV at T=4.2 K. Junctions on NdGaO/sub 3/ substrates had lower R/sub N/=1-5 /spl Omega/ and I/sub C/R/sub N/=0.4-0.9 mV at T=77 K. Three types of detecting devices have been investigated in both the broadband and the frequency-selective detection modes. One type was patterned with log-periodic antenna, and two others with Pt-metal double-slot antenna designed for a central frequency f=300 GHz and f=400 GHz, respectively. Measurements at f=320 GHz of the reception bandwidth /spl Delta/f for a device with double-slot antenna gave a quality factor Q=f//spl Delta/f/spl ap/10. A low-noise cooled 1-2 GHz bandwidth amplifier enables a better sensitivity in the self-pumping frequency mixing mode, avoiding the 1/f noise. The dependence of the spectral density of noise on voltage was compared to the data for the Josephson emission linewidth obtained by the selective detector response method. Also discussed are measurements at 500 GHz of the NEP values carried out at different experimental conditions.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•8 citations

Observation of a voltage-tunable sub-mm wave response from a YBCO Josephson device, operating in self-pumping mode

K. Y. Constantinian, G. A. Ovsyannikov, I. V. Borisenko +1 more

The first experimental data are presented on the observation of a response of a noise signal applied to a tunable-by-voltage high- T C Josephson mixer operating in a self-pumping mode within the frequency band of f = 750–970 GHz at ambient temperature T = 12.5 K. The mixer device was a thin-film YBaCuO bicrystal Josephson junction coupled with the electrodes patterned in log-periodic antenna. Experimental junctions exhibit RSJ-like I–V characteristics with a product of I C R N ≈ 2 mV ( I C is the critical current and R N is the normal state resistance). Down-converted signal response was examined at an intermediate frequency band within 1–2 GHz by means of the Fourier transform spectroscopy technique. Evaluated from Fourier transform spectrograms clear double-side band mixer response functions were registered at any of the fixed bias voltages in the range of V = 1.65–2.1 mV.

Superconductor Science and Technology•Nov 14, 2001•6 citations

Submillimeter wave response and noise in HTS Josephson junctions

Michael A. Tarasov, A. Shul’man, O. Y. Polyansky +5 more

The IV curves and the direct detector response of HTS bicrystal grain-boundary Josephson junctions have been measured under submm-wave irradiation at frequencies 350-750 GHz. The Josephson oscillation spectrum has been measured using the Hilbert transformation of detection response dependence. The Josephson oscillation linewidth and corresponding value of effective noise is compared to the estimates from the dc measurements of noise rounding of IV curve. To separate sources of noise the direct measurements of junction's output noise has been performed at 1.5 GHz and low frequencies 0.5-20 kHz.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Dec 18, 1996•0 citations

Sensitivity of high temperature superconducting Josephson detectors at millimetre-wave band

Jianfang Chen, Y. Kurigata, Huabing Wang +3 more

Sensitivity of high temperature superconducting (HTS) Josephson detectors at millimetre-wave band has been studied in detail. YBCO grain boundary Josephson junctions with the normal-state resistance ( R N ) around 1 Ω and I C R N product of less than 2 mV have been fabricated for this study, where I C is the critical current of the junction. A Gunn oscillator at the frequency of 98 GHz together with a set of calibrated attenuators with a total attenuation of 90 dB are used as a signal source. A quasi-optical system, which consists of a wideband planar log-periodic antenna encompassing the junction, parabolic mirrors and a hyperhemispherical silicon lens, has been used as an effective coupling system. Sensitivity increases with I C R N . Using a junction with I C R N of 300 µV, a sensitivity of about 9000 V W −1 has been obtained, which is higher than that of the Schottky diode detectors at the same frequency band and demonstrates that the HTS Josephson detectors are very sensitive at millimetre-wave band.

Superconductor Science and Technology•Nov 5, 2003•8 citations
An HTS Josephson spectrometer has been designed, fabricated and experimentally studied. The spectrometer circuit consists of a YBCO bicrystal Josephson junction integrated with a double-slot or log-periodic antenna, connected in parallel with a gold low-inductance shunt. The selective detector response and RF response at intermediate frequency f IF = 1.4 GHz were measured in the signal frequency range f s = 400-1250 GHz and the linewidth of Josephson oscillations (LJO) was determined by using three different methods. (1) The Hilbert spectroscopy approach was used in the processing of the selective detector response. (2) In case of f IF < LJO the detector and RF responses have similar shapes, allowing the spectrum and LJO to be extracted from the RF response and even processing by modified Hilbert spectroscopy. (3) The RF response at f IF > LJO corresponds to the frequency down-conversion in a self-pumped Josephson mixer mode. For the processing of the RF response in the high f IF limit we suggest a novel method that allows extraction of the signal spectrum by means of simple operations: shifting, summing and subtracting. The advantage of the RF response method is in its simplicity and higher sensitivity that allows it to be proposed for spectroscopy applications.
A Josephson high-temperature superconducting (HTSC) submillimeter-wave spectrometer is designed, built, and experimentally investigated. The integrated detection structure of the spectrometer includes a YBCO Josephson junction on a bicrystalline boundary, a double-slot or log-periodic antenna, and a low-inductance resistive shunt. The selective detector response and the response at an intermediate frequency of 1.4 GHz are measured under the action of a signal in the frequency range 350–1250 GHz. Three methods of spectroscopy are investigated using this setup: 1) a method of Hilbert spectroscopy with processing of the detector response is implemented; 2) it is found that for a wide Josephson line at intermediate frequency (IF) the response has the same form as the detector response, making it possible to obtain a spectrum and the width of the generation line from IF response measurements; 3) for a narrow Josephson line the IF response corresponds to the regime of conversion with self-pumping. A new method is proposed for calculating the emission spectrum. The method consists of simple shift, summation, and subtraction operations. The advantages of the method are simplicity, high sensitivity, and high resolution.
A Josephson quasioptical detector comprising YBaCuO junction on bicrystal MgO substrate, integrated log-periodic Au antenna, MgO extended hyperhemisphere lens attached to the substrate and 1.4 GHz cold amplifier with cold circulator has been designed, fabricated and experimentally studied. We fabricated several integrated Josephson junctions 1-2 /spl mu/m wide which at 4.2 K demonstrate RSJ IV curves with critical currents 100-300 /spl mu/A and normal resistance of 10-20 /spl Omega/. The noise temperature (T/sub N/) at 4.2 K and 330 GHz measured by a hot/cold load method in fundamental mixing mode with external BWO local oscillator brings T/sub N/=1100 K for the junction shunted by low-inductance resistive shunt and T/sub N/=1400 K without shunting. At bath temperatures of 20-40 K the noise temperature was in the range 1500-3000 K, at 50 K the noise temperature was below 2000 K, and at 60-70 K increased over 3000 K in the frequency range 310-586 GHz. The noise temperatures measured in the self-pumping mode vary between 580-2300 K with dc bias in the range 0.1-0.5 mV. The linewidth of Josephson oscillations has been extracted from a selective detector response and IF noise voltage dependence. The measured excess noise can be attributed to shot noise and multiple Andreev reflection in pinholes with Ss'S structure. We observed small subharmonic steps in IV curve and noise dependencies, which are typical for SNS junctions.
Detectors made from superconducting cuprate YBa/sub 2/Cu/sub 3/O/sub x/ bicrystal Josephson junctions (BJJs) on sapphire and NdGaO/sub 3/ substrates have been fabricated and characterized in the frequency band 200-900 GHz. Junctions on sapphire substrates had a normal state resistance R/sub N//spl ap/15-60 /spl Omega/, and I/sub C/R/sub N/ product up to 2.5 mV at T=4.2 K. Junctions on NdGaO/sub 3/ substrates had lower R/sub N/=1-5 /spl Omega/ and I/sub C/R/sub N/=0.4-0.9 mV at T=77 K. Three types of detecting devices have been investigated in both the broadband and the frequency-selective detection modes. One type was patterned with log-periodic antenna, and two others with Pt-metal double-slot antenna designed for a central frequency f=300 GHz and f=400 GHz, respectively. Measurements at f=320 GHz of the reception bandwidth /spl Delta/f for a device with double-slot antenna gave a quality factor Q=f//spl Delta/f/spl ap/10. A low-noise cooled 1-2 GHz bandwidth amplifier enables a better sensitivity in the self-pumping frequency mixing mode, avoiding the 1/f noise. The dependence of the spectral density of noise on voltage was compared to the data for the Josephson emission linewidth obtained by the selective detector response method. Also discussed are measurements at 500 GHz of the NEP values carried out at different experimental conditions.
The first experimental data are presented on the observation of a response of a noise signal applied to a tunable-by-voltage high- T C Josephson mixer operating in a self-pumping mode within the frequency band of f = 750–970 GHz at ambient temperature T = 12.5 K. The mixer device was a thin-film YBaCuO bicrystal Josephson junction coupled with the electrodes patterned in log-periodic antenna. Experimental junctions exhibit RSJ-like I–V characteristics with a product of I C R N ≈ 2 mV ( I C is the critical current and R N is the normal state resistance). Down-converted signal response was examined at an intermediate frequency band within 1–2 GHz by means of the Fourier transform spectroscopy technique. Evaluated from Fourier transform spectrograms clear double-side band mixer response functions were registered at any of the fixed bias voltages in the range of V = 1.65–2.1 mV.
The IV curves and the direct detector response of HTS bicrystal grain-boundary Josephson junctions have been measured under submm-wave irradiation at frequencies 350-750 GHz. The Josephson oscillation spectrum has been measured using the Hilbert transformation of detection response dependence. The Josephson oscillation linewidth and corresponding value of effective noise is compared to the estimates from the dc measurements of noise rounding of IV curve. To separate sources of noise the direct measurements of junction's output noise has been performed at 1.5 GHz and low frequencies 0.5-20 kHz.
Sensitivity of high temperature superconducting (HTS) Josephson detectors at millimetre-wave band has been studied in detail. YBCO grain boundary Josephson junctions with the normal-state resistance ( R N ) around 1 Ω and I C R N product of less than 2 mV have been fabricated for this study, where I C is the critical current of the junction. A Gunn oscillator at the frequency of 98 GHz together with a set of calibrated attenuators with a total attenuation of 90 dB are used as a signal source. A quasi-optical system, which consists of a wideband planar log-periodic antenna encompassing the junction, parabolic mirrors and a hyperhemispherical silicon lens, has been used as an effective coupling system. Sensitivity increases with I C R N . Using a junction with I C R N of 300 µV, a sensitivity of about 9000 V W −1 has been obtained, which is higher than that of the Schottky diode detectors at the same frequency band and demonstrates that the HTS Josephson detectors are very sensitive at millimetre-wave band.