Recent years, the technology of slow light generations and applications are becoming hot topics, including data buffering in optical communications and optical signal delay. In this paper, we propose the application of slow light in the field of optical sensor and illustrate several principles and structures to enhance the sensitivity of interferometers based on slow light. According to the experiment results, the sensitivity of the interferometers enhance 600 times at most; however, the sensitivity can enhance 107 times in theory; moreover, the volume of the interferometer can be reduced. The miniaturization and precision devices must be applied and researched deeply in the field of sensor and measurement technology.
Recent years, the technology of slow light generations and applications are becoming hot topics, including data buffering in optical communications and optical signal delay. In this paper, we propose the application of slow light in the field of optical sensor and illustrate several principles and structures to enhance the sensitivity of interferometers based on slow light. According to the experiment results, the sensitivity of the interferometers enhance 600 times at most; however, the sensitivity can enhance 107 times in theory; moreover, the volume of the interferometer can be reduced. The miniaturization and precision devices must be applied and researched deeply in the field of sensor and measurement technology.
Precise positioning and motion tracking are enabling development of key technologies in numerous fields of research and applications such as control, navigation, stabilization, and positioning systems for robotics, medical-imaging applications, virtual reality, computer games, and many more. While rotation sensing can be based on both mechanical and optical effects, optical gyroscopes provide the highest sensitivity and accuracy. Although the details may vary depending on the specific implementation, all optical rotation sensors exploit the Sagnac effect,1 i.e., the interference pattern resulting from the different phase shifts of waves propagating in a circular path along and opposite the direction of rotation. The classical Sagnac phase shift is determined solely by the angular velocity, the optical frequency, and the area enclosed by the closed-loop optical path, and completely independent of the medium’s other properties such as the index of refraction and its dispersion properties.2 This century-old result has been the subject of ongoing debate for several decades, both because of its fundamental nature and because it inherently limits the feasibility of attaining highly sensitive miniaturized rotation sensors. Specifically, it implies that the only ways to enhance the sensitivity and accuracy of optical gyroscopes are to either increase the optical frequency or enlarge the gyro’s area. In practice, both approaches are limited. Recent studies have pointed out the advantages of exploiting the Sagnac effect, generated by electronic resonances, in slow-3 and fast-light4 media (i.e., in which the group velocity is substantially smaller or larger than the speed of light) for fabrication of ultrasensitive optical gyroscopes. However, material properties based on slow/fast-light media suffer from inherent limitations and drawbacks. In particular, such systems are bulky, lossy, require very low temperatures, and are limited to specific wavelengths according to the material’s electronic andoptical properties. Instead, we have been focusing on photonic-resonance-based structures,5, 6 taking advantage of their flexibility, compact dimensions, and excellent optical Figure 1. Schematic of a coupled-resonator optical waveguide (CROW).
Summary form only given. Slow light has achieved great progress in waveguide and fibers in room temperature, which could be accelerating the transition of this technique to applications. This talk will review devising methods for tailoring the dispersion of optical materials, such as electromagnetically induced transparency, photonic crystals, and nano-optic resonators over the last decade. And the potential applications of slow light for optical buffering, data synchronization, optical memories, and optical signal processing will be cataloged. Then the interaction between slow light and Sagnac effect is discussed. The concept of the Sagnac effect in a slow-light medium and resonator structure with high group dispersion is investigated. It is found that a slow-light medium can be utilized for relative motion sensing, and a slow-light resonator structure is suitable to detect absolute rotation for navigation purposes. It is noted that the high group dispersion leads to a huge enhancement of the rotation sensor's sensitivity in a resonating structure, and an approach to evaluate and design resonator devices with slow-light property is proposed. Moreover, a folded loop-lattice-based structure is numerically simulated to verify the concept.
Research into slow light began theoretically in 1880 with the paper [1] of H A Lorentz, who is best known for his work on relativity and the speed of light. Experimental work started some 60 years later with the work of S L McCall and E L Hahn [2] who explored non-linear self-induced transparency in ruby. This field of research has burgeoned in the last 10 years, starting with the work of L Vestergaard Hau and coworkers on slow light via electromagnetically induced transparency in a Bose–Einstein condensate [3]. Many groups are now able to slow light down to a few metres per second or even stop the motion of light entirely [4]. Today, slow light – or more often `slow and fast light' – has become its own vibrant field with a strongly increasing number of publications. In broad scope, slow light research can be categorized in terms of the sort of physical mechanism used to slow down the light. One sort of slow light makes use of material dispersion. This dispersion can be the natural dispersion of the ordinary refractive index or can be the frequency dependence of some nonlinear optical process, such as electromagnetically induced transparency, coherent population oscillations, stimulated light scattering, or four-wave mixing processes. The second sort of slow light makes use of the wavelength dependence of artificially structured materials, such as photonic crystals, optical waveguides, and collections of microresonators. Material systems in which slow light has been observed include metal vapours, rare-earth-doped materials, Raman and Brillioun gain media, photonic crystals, microresonators and, more recently, metamaterials. A common feature of all of these schemes is the presence of a sharp single resonance or multiple resonances produced by an atomic transition, a resonance in a photonic structure, or in a nonlinear optical process. Current applications of slow light include a series of attractive topics in optical information processing, such as optical data storage, optical memories, quantum information devices, and optical communication systems in which the use of slow light will allow all-optical processing with less wasted heat. To implement these applications, devices such as buffers, memories, interferometers and switches that utilize slow light need to be developed. Future challenges include the need for improved coupling of light into slow light modes, overcoming propagation losses, and mitigating the influence of large dispersion of the group velocity. The collection of papers in this special issue of Journal of Optics features a broad spectrum of articles that highlight actual developments in many of the material types and schemes described above. It represents therefore an excellent up to date snapshot of the current state of the field of slow light research. References [1] Lorentz H A 1880 Uber die Beziehung zwischen der Fortpflanzung des Lichtes und der Körperdichte Wiedemann Ann. 9 641–64 [2] McCall S L and Hahn E L 1967 Self-induced transparency by pulsed coherent light Phys. Rev. Lett. 18 908–11 [3] Vestergaard Hau L, Harris S E, Dutton Z and Behroozi C H 1999 Nature 397 594 [4] Philips D F, Fleischhauer A, Mair A, Walsworth R L and Lukin M D 2001 Storage of light in atomic vapor Phys. Rev. Lett. 86 783–6
The ability to manipulate the speed of light has recently become one of the most exciting emergent topics in optics. There are several experimental demonstrations showing the capability to slow down light more than six orders of magnitude in a variety of media, ranging from atomic vapor, solid state crystal, to semiconductors. These results have led to intensive research into new materials, devices, and system studies that examine their impact to new applications. It is believed that we are on the verge of a dramatic change in the way we envision and construct communication, processing and control systems. One direct application of slow and fast light devices is in the area of communications. One grand challenge remaining in information technology today is to store and buffer optical signals directly in optical format. As such, optical signals must be converted to electronic signals to route, switch, or be processed. This resulted in significant latencies and traffic congestions in current networks. In addition, keeping the data in optical domain during the routing process can greatly reduce the power, complexity and size of the routers. To this end, a controllable optical delay line can effectively function as an optical buffer, and the storage is proportional to the variability of the group velocity. In addition to optical buffers, slow and fast light devices can be used as tunable true-time delay elements in microwave photonics, which are important for remotely controlling phased array antenna. Other novel applications include nonlinear optics, optical signal processing, and quantum information processing. There are various approaches that can be used to vary the optical group velocity. Ultraslow or fast group velocity may result from a large material dispersion, waveguide dispersion, or both. In this paper, the authors provide a review of recent progress of slow and fast light using semiconductor devices. Specifically, they will discuss results obtained using semiconductor quantum-well/quantum-dot absorber and optical amplifiers. Slow and fast light are controllable electrically by changing the bias current or voltage as well as optically by changing the pump laser intensity and wavelength. Delay-bandwidth tradeoff and other figures of merits are analyzed
Light showing extremely slow propagation (known as "slow light") can produce various effects such as compression of optical signals, buffering, convolution integral calculation, beam forming, enhancement of optical absorption, gain, non-linearity, and so on. To generate such light, very large material and structural dispersions are used. Photonic crystal waveguides are good candidates for many device applications since they can easily generate slow light at room temperature. This paper discusses the potential of slow light devices while explaining some critical issues, such as the delay-band product and the dispersion compensation.