Studenikin et al.[1] recently demonstrated a significant enhancement of the fringe contrast of coherent Landau-Zener-Stückelberg (LZS) oscillations between singlet S and triplet T+ two-spin states using a modified charge detection technique called enhanced charge detection (ECD). In this paper we explain the amplitude phase reversal and confirm the magnitude of the effect is consistent with our calibrations. We also show that the enhancement cannot be explained by a T1 effect.
Studenikin et al.[1] recently demonstrated a significant enhancement of the fringe contrast of coherent Landau-Zener-Stückelberg (LZS) oscillations between singlet S and triplet T+ two-spin states using a modified charge detection technique called enhanced charge detection (ECD). In this paper we explain the amplitude phase reversal and confirm the magnitude of the effect is consistent with our calibrations. We also show that the enhancement cannot be explained by a T1 effect.
We employ an intermediate excited charge state of a lateral quantum dot device to increase the charge detection contrast during the qubit state readout procedure, allowing us to increase the visibility of coherent qubit oscillations. This approach amplifies the coherent oscillation magnitude but has no effect on the detector noise resulting in an increase in the signal to noise ratio. In this letter, we apply this scheme to demonstrate a significant enhancement of the fringe contrast of coherent Landau-Zener-Stückelberg oscillations between singlet S and triplet T+ two-spin states.
Landau-Zener (LZ) transition has received renewed interest as an alternative approach to control single-qubit states. An LZ transition occurs when a system passes through an avoided crossing that arises from quantum mechanical coupling of two levels, taking the system to a coherent superposition of the two states. Then, multiple LZ transitions induce interference known as Landau-Zener-Stückelberg (LZS) interference whose amplitude strongly depends on the velocity or adiabaticity of the passage. Here, we study the roles of LZ transitions and LZS interference in coherent charge oscillations of a one-electron semiconductor double quantum dot by time-domain experiments using standard rectangular voltage pulses. By employing density matrix simulations, we show that, in the standard setup using rectangular pulses, even a small distortion of the pulse can give rise to LZ transitions and hence LZS interference, which significantly enhances the measured oscillation amplitude. We further show experimentally that the nature of the coherent charge oscillations changes from Rabi-type to LZS oscillations with increasing pulse distortion. Our results thus demonstrate that it is essential to take into account LZS interference for both precise control of charge qubits and correct interpretation of measurement results.
Landau-Zener-Stuckelberg-Majorana (LZSM) physics has been exploited to coherently manipulate two-electron spin states in a GaAs double quantum dot (DQD) at a singlet (S)-triplet (T+) anti-crossing. The anti-crossing results from the hyperfine interaction with the nuclear spins of the host material [1,2]. However, the fluctuations of the nuclear spin bath result in spin dephasing within T ∗ 2 ∼ 10− 20 ns. As a consequence, the sweep through the anti-crossing would have to be performed on a timescale comparable to T ∗ 2 to achieve LZSM oscillations with 100% visibility. Moreover, the S-T+ anti-crossing is located near the (1, 1)− (2, 0) interdot charge transition, where (nl, nr) denotes the number of electrons in the left and right quantum dot. As a result the singlet state involved in the dynamics is a superpostion of (1, 1) and (2, 0) singlet states. Here we show that it is possible to increase the oscillation visibility while keeping sweep times less than T ∗ 2 using a tailored pulse with a detuning dependent level velocity. The pulse includes a slow level velocity portion that is chosen to coincide with the passage through the S-T+ anti-crossing and two fast level velocity portions. The latter minimize the time spent in regions where spin and charge degrees of freedom are entangled, which renders the qubit susceptible to charge noise. The slow level velocity portion of the pulse results in a stronger effective coupling between the spins states, which increases the oscillations visibility [3,4]. In particular, we were able to obtain a visibility of ∼ 0.5 for LZSM oscillations. This constitutes an important step towards the implementation of a Hadamard gate.
We demonstrate amplification (and attenuation) of a probe signal by a driven two-level quantum system in the Landau-Zener-St\"uckelberg-Majorana regime by means of an experiment, in which a superconducting qubit was strongly coupled to a microwave cavity, in a conventional arrangement of circuit quantum electrodynamics. Two different types of flux qubit, specifically a conventional Josephson junctions qubit and a phase-slip qubit, show similar results, namely, lasing at the working points where amplification takes place. The experimental data are explained by the interaction of the probe signal with Rabi-like oscillations. The latter are created by constructive interference of Landau-Zener-St\"uckelberg-Majorana (LZSM) transitions during the driving period of the qubit. A detailed description of the occurrence of these oscillations and a comparison of obtained data with both analytic and numerical calculations are given.
We present the observation of Landau-Zener-St\"uckelberg (LZS) interference of the dressed states arising from an artificial atom, a superconducting phase qubit, interacting with a microwave field. The dependence of LZS interference fringes on various external parameters and the initial state of the qubit agrees quantitatively very well with the theoretical prediction. Such LZS interferometry between the dressed states enables us to control the quantum states of a tetrapartite solid-state system with ease, demonstrating the feasibility of implementing efficient multipartite quantum logic gates with this unique approach.
Détection du déplacement d'électrons dans le régime de l'effet Hall Quantique à l'aide d'un singlet-triplet quantum bit détecteur L’optique quantique avec électron est un domaine de recherche en expansion depuis ses débuts au cours des années 90 prenant suite aux premières expériences d’interférence avec électrons réalisées dans les années 80. Ce domaine est dédié à la réalisation d’expérience d’optique quantique avec des électrons plutôt que des photons. Leur intérêt est double, d’une part les électrons étant des fermions de nouveaux phénomènes, en comparaison des photons qui sont des bosons, peuvent être observés. L’électron anti-bunching, en comparaison du bunching des photons obtenu dans des expériences de corrélations en est un exemple. Le deuxième avantage des électrons est le fait qu’ils peuvent être contrôlés et manipulés à l’aide de champ électrique, un tel contrôle n’est pas possible avec des photons. Alors que les composants de base pour la réalisation de ces expériences sont déjà existant comme la lame séparatrice, ou encore les sources cohérentes à électrons uniques, la détection immédiate d’un électron unique dans de telles expériences est toujours manquante. La difficulté étant le faible temps d’interaction entre l’électron en déplacement et le détecteur de charge qui est limité typiquement à moins de 1ns principalement à cause de la vitesse élevée de déplacement de l’électron qui est égale à la vitesse de Fermi soit 10-100km/s. Ce temps d’interaction est environ deux ordres de grandeurs plus petits que ce qui est nécessaire pour le meilleur détecteur de charge démontré jusqu’à présent.Dans ce manuscrit est présenté le développement d’un détecteur ultra-sensible pour la détection immédiate d’un électron se déplaçant à la vitesse de Fermi. Notre stratégie est de détecter un électron unique se déplaçant dans les canaux de bords (ECs) de l’effet Hall quantique à partir de la mesure d’une variation de phase d’un bit quantique singlet-triplet, appelé qubit détecteur par la suite. La détection immédiate de cet électron en déplacement n’étant possible que si l’interaction avec ce dernier induit une variation de phase de pi, avec une lecture immédiate de l’état de spin du qubit détecteur.Grâce au développement et à l’utilisation d’un RF-QPC, cette lecture immédiate de l’état de spin est tout d’abord démontrée. Par la suite le développement du qubit détecteur avec la réalisation d’oscillations cohérentes d’échange est décrit. Sa sensibilité en charge est démontrée avec l’observation d’une phase induite par l’interaction avec un courant d’électrons dans les ECs. Ce courant est imposé par l’application d’un biais de tension contrôlant le potentiel chimique de ces ECs.Après optimisation de ce qubit détecteur pour la détection d’un électron unique, il est calibré en utilisant le même procédé de courant imposé par application d’un biais de tension. Cette calibration nous fournie la variation de signal attendue pour l’interaction avec cette charge unique est indique que sa détection immédiate est impossible dans nos conditions expérimentales. Notre détecteur ayant une sensibilité de charge de l’ordre de 8.10-5 pour une bande passante allant de DC à 1THz. Cette sensibilité est environ deux ordres de grandeur trop petite que ce qui est nécessaire pour la détection immédiate de cette charge unique. Finalement, ce qubit détecteur est utilisé pour détecté, dans une expérience moyennée, ce qui est appelé un edge magneto plasmon composé par moins de 5 électrons. Néanmoins, atteindre la détection de la charge unique dans n’a pas été possible, la sensibilité en charge étant légèrement trop petite pour y arriver.Les différentes limites de notre détecteur sont listées et expliquées tout au long du manuscrit, avec une présentation de différents axes de développement qui devraient permettre de réussir cette détection d’un électron unique dans une nouvelle expérience.