Interaction of a light beam with matter reveals extreme sensitivity to transverse motions. Spatio-temporal delocalization of interaction and diffusive transport of light-induced perturbations is revealed through a new family of diffraction patterns. The response of the medium to the transverse motion of the light enhances near the second order phase transition point. The phenomenon has large application potential for the study of motions that are beyond the power of Doppler-effect-based methods, and suggests fundamental problems about critical processes with nonstationary influences.
Interaction of a light beam with matter reveals extreme sensitivity to transverse motions. Spatio-temporal delocalization of interaction and diffusive transport of light-induced perturbations is revealed through a new family of diffraction patterns. The response of the medium to the transverse motion of the light enhances near the second order phase transition point. The phenomenon has large application potential for the study of motions that are beyond the power of Doppler-effect-based methods, and suggests fundamental problems about critical processes with nonstationary influences.
Transverse effects are known to play a central role in nonlinear-optical systems.Since experiments are generally performed with lasers with finite transverse dimensions, the transverse nature of the field must be considered.Experimental evidence, for example, indicates that mechanisms in the form of diffusive and diffractive coupling within the medium, free-space diffraction, or some combination of these, can create transverse structures which are important in optical bistability and self-focusing/defocusing.In particular, transverse coupling is attributed to such phenomena as radial dependence of the switch up times of bistable loops, spatial hysteresis, and the formation of solitary waves in passive systems.The dynamical effects of free-space diffraction in a unidirectional ring cavity containing a thin resonant absorber driven by an external coherent signal is considered.Minimal focusing effects exist in this system by incorporating a thin medium whose width is small compared to the cavity length and Raleigh range.There is no restriction on the medium response time relative to the round trip time; i.e. the time-dependent polarization is not adiabatically eliminated from the equations of motion.Free-space diffraction effects are isolated and diffraction and diffusive coupling within the medium is negligible.In this model where free-space diffraction is the dominant mechanism for changing the field profile in the system, shifting, deformation, and radial variation of the bistable loop and spatial hysteresis is attributed to an inherent dispersion induced by the free-space diffraction.
Dynamical transient response and longitudinal spatial evolution of the first-order phase transition are presented for intrinsic optical bistability of a system of interacting spatially distributed, coherently driven two-level atoms. It is shown that a discontinuity in the nonlinear dielectric function is established internal to the medium due to transient response to a coherent, externally applied, time-dependent driving field, following the attainment of a critical value for the input intensity. If the externally applied field intensity reaches the steady state, beyond the critical value, the discontinuity of the nonlinear dielectric function in the medium reaches a stable stationary condition and forms a spatial boundary between states of high and low polarization in the medium. Thus it is shown that intrinsic optical bistability corresponds to a spatial as well as a temporal first-order phase transition in light-matter interactions, far from thermodynamic equilibrium, where the spatial boundary between different phases is established by transient dynamical response to the incident field.
There is a broad interest in enhancing the strength of light-atom interactions to the point where injecting a single photon induces a nonlinear material response. Here we show theoretically that sub-Doppler-cooled two-level atoms that are spatially organized by weak optical fields give rise to a nonlinear material response that is greatly enhanced beyond that attainable in a homogeneous gas. Specifically, in the regime where the intensity of the applied optical fields is much less than the off-resonance saturation intensity, we show that the third-order nonlinear susceptibility scales inversely with atomic temperature and, due to this scaling, can be two orders of magnitude larger than that of a homogeneous gas for typical experimental parameters. As a result, we predict that spatially bunched two-level atoms can exhibit single-photon nonlinearities. Our model is valid for all regimes of atomic bunching and simultaneously accounts for the backaction of the atoms on the optical fields. Our results agree with previous theoretical and experimental results for light-atom interactions that have considered only limited regimes of atomic bunching. For lattice beams tuned to the low-frequency side of the atomic transition, we find that the nonlinearity transitions from a self-focusing type to a self-defocusing type at a critical intensity. We also show that higher than third-order nonlinear optical susceptibilities are significant in the regime where the dipole potential energy is on the order of the atomic thermal energy. We therefore find that it is crucial to retain high-order nonlinearities to accurately predict interactions of laser fields with spatially organized ultracold atoms. The model presented here is a foundation for modeling low-light-level nonlinear optical processes for ultracold atoms in optical lattices.
Summary form only given. The quantum properties of the interaction between an electromagnetic field and a nonlinear media have been widely studied, theoretically and experimentally, but so far these studies concerned mainly measurements performed on the total intensity of light beams, integrated over all the transverse plane. However, the details of the noise distribution inside the transverse plane, as well as the spatial quantum correlation between two different points, can be also very instructive, on a fundamental side in order to understand the propagation of the quantum noise, but also on a practical side to generate special configurations of the field which allow us to increase the spatial resolution of measurements in the transverse plane. We study here the spatial properties of the quantum fluctuations for a field freely propagating in a thick nonlinear medium, and in a case where the interaction distance is not limited by the diffraction : the spatial soliton regime, where diffraction effects are counterbalanced by nonlinearity and which exists in /spl chi//sup (2)/ and /spl chi//sup (3)/ media.
All-optical devices allow improvements in the speed of optical communication and computation systems by avoiding the conversion between the optical and electronic domains. The focus of this thesis is the experimental investigation of a new type of all-optical switch that is based on the control of optical patterns formed by nonlinear interactions between light and matter.\nThe all-optical switch consists of a pair of light beams that counterpropagate through warm rubidium vapor. These beams induce a nonlinear optical instability that gives rise to mirrorless parametric self-oscillation and generates light in the state of polarization that is orthogonal to that of the pump beams. In the far-field, the generated light forms patterns consisting of two or more spots. To characterize this instability, I observe experimentally the amount of generated power and the properties of the generated patterns as a function of pump beam intensity, frequency, and size. Near an atomic resonance, the instability has a very low threshold: with less than 1 mW of total pump power, >3 μW of power is generated.\nTo apply this system to all-optical switching, I observe that the orientation of the generated patterns can be controlled by introducing a symmetry-breaking perturbation to the system. A perturbation in the form of a weak switch beam injected into the nonlinear medium is suitable for controlling the orientation of the generated patterns. The device operates as a switch where each state of the pattern orientation corresponds to a state of the switch, and spatial filtering of the generated pattern defines the output ports of the device. Measurements of the switch response show that it can be actuated by as few as 600 ±40 photons. For a switch beam with 1/e field radius w0 = 185 ± 5μm, 600 ±40 photons correspond to an energy density of 5.4±0.7×10−4 photons/λ2/(2π) which is comparable to the best reported results from all-optical switches. The approach to all-optical switching I report here operates at very low light levels and exhibits cascadability and transistor-like response. Furthermore, the sensitivity is comparable to switches using cold-atom electromagnetically-induced transparency or cavity quantum-electrodynamics techniques, but is achieved with a simpler system, requiring only one optical frequency and occurring in warm atomic vapor.\nI develop a numerical model for the switch that exhibits patterns that rotate in the presence of a weak applied optical field. Results from this model, and from my experiment, show that the switch response time increases as the input power decreases. I propose that this increase is due to critical slowing down. Mapping the pattern orientation to a simple one-dimensional system shows that critical slowing down may account for the observed increase in response time at low input power. The ultimate performance of the device is likely limited by critical slowing down and I conclude that the minimum number of photons capable of actuating the switch is between 400 and 600 photons.\nMy approach to all-optical switching is simple, extremely sensitive and exhibits many of the properties necessary for use as an optical logic element. Additionally, this work has implications for a wide range of pattern forming systems, both in the field of optics and beyond, that may be applicable as novel devices for sensitive measurement and detection.