Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Multigigahertz time-domain testing of the quantum flux parametron

Juan Casas, R. Kamikawai, Naoko Miyamoto, Eiichi Goto

Published Nov 1, 1991• 0 citations
Publisher

Abstract

The quantum flux parametron QFP is a very fast superconducting logic device. Previously, the high frequency operation of the QFP was assessed by analysing the output of the device in the frequency domain. This paper shows for the first time that time domain measurements are possible in spite of the low voltage amplitude of the output signal and relatively large crosstalk with the clock frequency. The time-domain waveform of a single-bit shift register with logic inversion working at a clock frequency of 5 GHz is recorded.

DOI
10.1088/0953-2048/4/11/013

Related papers

Quantum Flux Parametron: A Single Quantum Flux Superconducting Logic Device

W. Hioe, Eiichi Goto

This book concerns a Josephson device for supercomputers which has extremely low heat dissipation (about 106 times less than semiconductor devices and 103 times less than voltage-based Josephson devices). In the previous book on Quantum Flux Parametrons (QFPs), DC Flux Parametron, the basic device operation are described. This book deals in much greater depth on the problems which are faced by the QFP. The device characteristics are worked out in detail showing clearly the analysis methods used. A new logic gate using the QFP is described with respect to its basic scheme, operation, and ways for forming logic circuits. The problems faced by the basic QFP are much reduced in the new logic gate. As the QFP operates near the Heisenberg and Boltzmann limits for computing devices, we also show the relationship between speed and stability. The book contains the latest analytical results on QFPs. The material presented in the book can be understood with very little mathematical training or knowledge about superconducting physics. It is also self-contained and does not require reading of other material. Most of the device characteristics can be reproduced from the equations given using simple programs. A circuit simulator is not needed except for high speeds when transient behavior becomes important

WORLD SCIENTIFIC eBooks•Mar 1, 1991•15 citations

Operation of a 1-bit quantum flux parametron shift register (latch) by 4-phase 36-GHz clock

M. Hosoya, W. Hioe, Kazumasa Takagi +1 more

The Quantum Flux Parametron (QFP) is a SFQ-type logic device which uses a single flux quantum (SFQ) to represent 1-bit of information. QFP circuits use a multi-phase external ac power which also acts as the clock for synchronization, hence QFP circuits are highly pipelined. The clock frequency must be increased to improve the throughputs of the circuits, so the control of a high frequency clock is a key technology for the QFP. This paper describes a clock distribution technique which utilizes the characteristics of a standing wave. Using this technique, the operation of a 1-bit QFP shift register by a 4-phase clock up to 36 GHz is shown. In the 4-phase clock operation of QFPs, the input is given in phase 1, the QFP switches in phase 2, the output is held during phase 3, and the QFP resets in phase 4. Therefore, the 4-phase 36-GHz operation means that each QFP switches or resets in less than 7 ps.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•15 citations

A new quantum flux parametron logic gate with large input margin

W. Hioe, M. Hosoya, Eiichi Goto

The quantum flux parametron (QFP) is a flux-transfer, flux-activated Josephson logic device which realizes much lower power dissipation than other Josephson logic devices. Being a two-terminal device, its correct operation may be affected by coupling to other QFPs. The problems include backcoupling form active QFPs through inactive QFPs (relay noise), coupling between QFPs activated at different times because of clock skew (homophase noise), and interaction between active QFPs (reaction hazard). Previous QFP circuits worked by wired-majority, which is a linear input logic and has low input margin. A logic gate (D-gate) using a QFP to perform logic operations has been analyzed and tested by computer simulation. Relay noise, homophase noise, and reaction hazard are substantially reduced. Moreover, the inputs have little interaction, and hence input margin is greatly improved. Using only D-gates it is possible to realize any combinational logic function. Important logic functions can be realized using one gate, such as a two-input multiplexer, majority, and parity. Since the QFP has a latching effect, D-gates can realize fully pipelined circuits without additional registers.

IEEE Transactions on Magnetics•Mar 1, 1991•8 citations

Quantum flux parametron: a single quantum flux device for Josephson supercomputer

M. Hosoya, W. Hioe, Juan Casas +6 more

A quantum flux parametron (QFP), a single quantum flux superconductive device that has a potential of up to 100-GHz switching with nW-order power dissipation, is considered. The potential of the QFP and key technologies when QFPs are applied to a Josephson supercomputer are described. Switching speed, stability, and power dissipation of a QFP are discussed. QFP gates, circuits, and systems are next described. Then, ultra-fast clock distribution using a standing wave is explained. High-speed operation at more than 10 GHz and 10/sup 14/ error-free operations per QFP have been demonstrated. Finally described is a high-density packaging scheme by three-dimensional integration, which is very important for ultra-high speed circuits because the propagation delay becomes dominant in such circuits.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1991•149 citations

A High-Speed Interface Based on a Josephson Latching Driver for Adiabatic Quantum-Flux-Parametron Logic

Fumihiro China, Naoki Takeuchi, Hideo Suzuki +3 more

The adiabatic quantum flux parametron (AQFP) is an energy-efficient, high-speed superconducting logic device. To observe the tiny output currents from the AQFP in experiments, high-speed voltage drivers are indispensable. In the present study, we develop a compact voltage driver for AQFP logic based on a Josephson latching driver (JLD), which has been used as a high-speed driver for rapid single-flux-quantum (RSFQ) logic. In the JLD-based voltage driver, the signal currents of AQFP gates are converted into gap-voltage-level signals via an AQFP/RSFQ interface and a four-junction logic gate. Furthermore, this voltage driver includes only 15 Josephson junctions, which is much fewer than in the case for the previously designed driver based on dc superconducting quantum interference devices (60 junctions). In measurement, we successfully operate the JLD-based voltage driver up to 4 GHz. We also evaluate the bit error rate (BER) of the driver and find that the BER is 7.92×10-10 and 2.67×10-3 at 1GHz and 4GHz, respectively.

IEICE Transactions on Electronics•Dec 2, 2021•3 citations

Design and fabrication of QFP logic gates based on YBa/sub 2/Cu/sub 3/O/sub 7/ step-edge junctions

H. Hasegawa, Y. Tarutani, Uki Kabasawa +3 more

Quantum Flux Parametron (QFP) logic gates were designed and fabricated from a single layer of YBa/sub 2/Cu/sub 3/O/sub 7/ thin film based on step-edge Josephson junctions. Self-inductance (L) of the QFP loop, an important circuit parameter, as is critical current (J/sub c/) of the Josephson junction, was determined by using directly coupled dc superconducting quantum interference devices (SQUIDs). Magnetically coupled dc SQUIDs were used to detect the output signal from the QFP. Simulated waveforms were used to identify the operation modes of the QFP as a function of the circuit parameters. From examination of the output waveforms of the QFP, operation in agreement with simulations was confirmed.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•4 citations
The quantum flux parametron QFP is a very fast superconducting logic device. Previously, the high frequency operation of the QFP was assessed by analysing the output of the device in the frequency domain. This paper shows for the first time that time domain measurements are possible in spite of the low voltage amplitude of the output signal and relatively large crosstalk with the clock frequency. The time-domain waveform of a single-bit shift register with logic inversion working at a clock frequency of 5 GHz is recorded.
This book concerns a Josephson device for supercomputers which has extremely low heat dissipation (about 106 times less than semiconductor devices and 103 times less than voltage-based Josephson devices). In the previous book on Quantum Flux Parametrons (QFPs), DC Flux Parametron, the basic device operation are described. This book deals in much greater depth on the problems which are faced by the QFP. The device characteristics are worked out in detail showing clearly the analysis methods used. A new logic gate using the QFP is described with respect to its basic scheme, operation, and ways for forming logic circuits. The problems faced by the basic QFP are much reduced in the new logic gate. As the QFP operates near the Heisenberg and Boltzmann limits for computing devices, we also show the relationship between speed and stability. The book contains the latest analytical results on QFPs. The material presented in the book can be understood with very little mathematical training or knowledge about superconducting physics. It is also self-contained and does not require reading of other material. Most of the device characteristics can be reproduced from the equations given using simple programs. A circuit simulator is not needed except for high speeds when transient behavior becomes important
The Quantum Flux Parametron (QFP) is a SFQ-type logic device which uses a single flux quantum (SFQ) to represent 1-bit of information. QFP circuits use a multi-phase external ac power which also acts as the clock for synchronization, hence QFP circuits are highly pipelined. The clock frequency must be increased to improve the throughputs of the circuits, so the control of a high frequency clock is a key technology for the QFP. This paper describes a clock distribution technique which utilizes the characteristics of a standing wave. Using this technique, the operation of a 1-bit QFP shift register by a 4-phase clock up to 36 GHz is shown. In the 4-phase clock operation of QFPs, the input is given in phase 1, the QFP switches in phase 2, the output is held during phase 3, and the QFP resets in phase 4. Therefore, the 4-phase 36-GHz operation means that each QFP switches or resets in less than 7 ps.>
The quantum flux parametron (QFP) is a flux-transfer, flux-activated Josephson logic device which realizes much lower power dissipation than other Josephson logic devices. Being a two-terminal device, its correct operation may be affected by coupling to other QFPs. The problems include backcoupling form active QFPs through inactive QFPs (relay noise), coupling between QFPs activated at different times because of clock skew (homophase noise), and interaction between active QFPs (reaction hazard). Previous QFP circuits worked by wired-majority, which is a linear input logic and has low input margin. A logic gate (D-gate) using a QFP to perform logic operations has been analyzed and tested by computer simulation. Relay noise, homophase noise, and reaction hazard are substantially reduced. Moreover, the inputs have little interaction, and hence input margin is greatly improved. Using only D-gates it is possible to realize any combinational logic function. Important logic functions can be realized using one gate, such as a two-input multiplexer, majority, and parity. Since the QFP has a latching effect, D-gates can realize fully pipelined circuits without additional registers.
A quantum flux parametron (QFP), a single quantum flux superconductive device that has a potential of up to 100-GHz switching with nW-order power dissipation, is considered. The potential of the QFP and key technologies when QFPs are applied to a Josephson supercomputer are described. Switching speed, stability, and power dissipation of a QFP are discussed. QFP gates, circuits, and systems are next described. Then, ultra-fast clock distribution using a standing wave is explained. High-speed operation at more than 10 GHz and 10/sup 14/ error-free operations per QFP have been demonstrated. Finally described is a high-density packaging scheme by three-dimensional integration, which is very important for ultra-high speed circuits because the propagation delay becomes dominant in such circuits.>
The adiabatic quantum flux parametron (AQFP) is an energy-efficient, high-speed superconducting logic device. To observe the tiny output currents from the AQFP in experiments, high-speed voltage drivers are indispensable. In the present study, we develop a compact voltage driver for AQFP logic based on a Josephson latching driver (JLD), which has been used as a high-speed driver for rapid single-flux-quantum (RSFQ) logic. In the JLD-based voltage driver, the signal currents of AQFP gates are converted into gap-voltage-level signals via an AQFP/RSFQ interface and a four-junction logic gate. Furthermore, this voltage driver includes only 15 Josephson junctions, which is much fewer than in the case for the previously designed driver based on dc superconducting quantum interference devices (60 junctions). In measurement, we successfully operate the JLD-based voltage driver up to 4 GHz. We also evaluate the bit error rate (BER) of the driver and find that the BER is 7.92×10-10 and 2.67×10-3 at 1GHz and 4GHz, respectively.
Quantum Flux Parametron (QFP) logic gates were designed and fabricated from a single layer of YBa/sub 2/Cu/sub 3/O/sub 7/ thin film based on step-edge Josephson junctions. Self-inductance (L) of the QFP loop, an important circuit parameter, as is critical current (J/sub c/) of the Josephson junction, was determined by using directly coupled dc superconducting quantum interference devices (SQUIDs). Magnetically coupled dc SQUIDs were used to detect the output signal from the QFP. Simulated waveforms were used to identify the operation modes of the QFP as a function of the circuit parameters. From examination of the output waveforms of the QFP, operation in agreement with simulations was confirmed.