Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

Noiseless Filtering of non-Gaussian Noise from Continuous-Variable Quantum Information

Christoffer Wittmann, Dominique Elser, Ulrik L. Andersen, Radim Filip, Petr Marek, Gerd Leuchs

Published Jun 1, 2007• 0 citations
Publisher

Abstract

In this paper, we consider the process of filtering non-Gaussian noise from binary coherent states using two different measurement methods: homodyne detection and on/off detection. Characteristics of homodyne and on/off detection in such a filter are compared and the optimal device is discussed. The performance of the protocol was characterized by measuring the signal state probability before and after filtration. We also measured the success probability (that is, the probability for a positive filter output) as well as the filter sensitivity for extremely weak signal states. All these results will be presented.

DOI
10.1109/cleoe-iqec.2007.4386763

Related papers

Quantum filtering of optical coherent states

Christoffer Wittmann, Dominique Elser, Ulrik L. Andersen +3 more

We propose and experimentally demonstrate nondestructive and noiseless removal (filtering) of vacuum states from an arbitrary set of coherent states of continuous variable systems. Errors, i.e., vacuum states in the quantum information are diagnosed through a weak measurement, and on that basis, probabilistically filtered out. We consider three different filters based on on-off detection, phase stabilized, and phase randomized homodyne detection. We find that on-off detection, optimal in the ideal theoretical setting, is superior to the homodyne strategy also in a practical setting.

arXiv:0704.1918•Physical Review A•Sep 12, 2008•17 citations

Comparing Homodyne and Heterodyne Tomography of Quantum States of Light

Rhea P. Fernandes, Andrew J. Pizzimenti, Christos N. Gagatsos +1 more

Non-Gaussian quantum states are critical resources in photonic quantum information processing, rendering their generation and characterization of increasing importance in quantum optics. In this work, we theoretically and numerically analyze the relative efficiency of homodyne versus heterodyne measurements for reconstructing non-Gaussian states, a major outstanding question in continuous-variable tomography. Combining a Fisher information-based formalism with simulated experiments, we find homodyne tomography to outperform heterodyne measurements for all non-Gaussian states tested, although the separation between the two modalities proves significantly narrower than suggested by the asymptotic Cramer-Rao lower bound. Our results should find use for optimizing measurement strategies in practical continuous-variable quantum systems.

quant-pharXiv:2512.17031•Dec 22, 2025•1 citation

Near-optimal coherent state discrimination via continuously labelled non-Gaussian measurements

James Moran, Spiros Kechrimparis, Hyukjoon Kwon

Quantum state discrimination plays a central role in quantum information and communication. For the discrimination of optical quantum states, the two most widely adopted measurement techniques are photon detection, which produces discrete outcomes, and homodyne detection, which produces continuous outcomes. While various protocols using photon detection have been proposed for optimal and near-optimal discrimination between two coherent states, homodyne detection is known to have higher error rates, with its minimum achievable error rate often referred to as the Gaussian limit. In this work, we demonstrate that, despite the fundamental differences between discretely labelled and continuously labelled measurements, continuously labelled non-Gaussian measurements can also achieve near-optimal coherent state discrimination. We design two discrimination protocols that surpass the Gaussian limit: one using non-Gaussian unitary operations with homodyne detection, and another based on orthogonal polynomials. Our results show that photon detection is not required for near-optimal coherent state discrimination and that we can achieve error rates close to the Helstrom bound at low energies with continuously labelled measurements. We also find that our schemes maintain an advantage over the photon detection-based Kennedy receiver for a moderate range of coherent state amplitudes.

arXiv:2409.08032•Quantum•Mar 9, 2026•1 citation

Exploring the Use of Nonconventional Receivers for Quantum Communications

Joás J.M. Lacerda, L. J. Pereira, Lucas F. Melo +2 more

Standard protocols in optical communication systems employ coherent states of light as the information carriers. The quantum nature inherent to these states introduces a fundamental complexity into the decoding process. In particular, when dealing with attenuated signals, the overlap between different states precludes the possibility of perfectly discriminate them. In this study, we investigate the performance of conventional and nonconventional quantum discrimination strategies under different informational metrics. We focus our analysis on binary coherent states within the ideal case of a lossless channel. The usual homodyne receiver was studied in comparison with the Kennedy and the optimized displacement receiver. We find that nonconventional strategies employing non-Gaussian measurements surpass the conventional homodyne discrimination scheme according to measurement error probability and mutual information.

Journal of Bioengineering, Technologies and Health•Feb 25, 2026•0 citations

Non-Gaussian entanglement criteria for atomic homodyne detection

Jaehak Lee, Jiyong Park, Jaewan Kim +2 more

Homodyne measurement is a crucial tool widely used to address continuous variables for bosonic quantum systems. While an ideal homodyne detection provides a powerful analysis, e.g., to effectively measure quadrature amplitudes of light in quantum optics, it relies on the use of a strong reference field, the so-called local oscillator, typically in a coherent state. Such a strong coherent local oscillator may not be readily available, particularly for a massive quantum system like a Bose-Einstein condensate, posing a substantial challenge in dealing with continuous variables appropriately. It is necessary to establish a practical framework that includes the effects of nonideal local oscillators for a rigorous assessment of various quantum tests and applications. We here develop entanglement criteria beyond a Gaussian regime applicable for this realistic homodyne measurement that do not require assumptions on the state of local oscillators. We discuss the working conditions of homodyne detection to effectively detect non-Gaussian quantum entanglement under various states of local oscillators.

arXiv:2401.01228•Physical Review A•Feb 14, 2023•1 citation

Analog-to-digital conversion in the quantum regime

Thomas Pousset, Matteo Schiavon, Guillaume Ricard +3 more

Digital signal processing has become essential in quantum optics, particularly for continuous-variable (CV) information encoding, enabling coherent detection schemes and mitigation of linear impairments. While linear signal processing in double homodyne detection has been studied under the assumption that all post-measurement processing can be backpropagated in the optical domain, a rigorous treatment of the digitization chain, spanning optical, electronic, and sampling stages, is still lacking. In this work, we consider the continuous mode description of double homodyne detection to fully capture the maximum mode-matching coefficient achievable as a function of electronic noise, signal bandwidth, receiver electronics bandwidth, and sampling rate, that is the entry point of digital signal processing. We establish a dimensioning rule that generalizes the Nyquist-Shannon criterion to account for quantum fluctuations of the measured signal, not merely its bandwidth. Analyzing the case of additive white electronic noise, we find numerically that optimal signal-to-noise ratio is achieved when the electronic bandwidth is large enough to pass the signal yet narrower than the sampling rate in order to mitigate noise amplification, yielding a concrete design criterion for coherent detection.

quant-pharXiv:2609.07643•Sep 8, 2026•0 citations
In this paper, we consider the process of filtering non-Gaussian noise from binary coherent states using two different measurement methods: homodyne detection and on/off detection. Characteristics of homodyne and on/off detection in such a filter are compared and the optimal device is discussed. The performance of the protocol was characterized by measuring the signal state probability before and after filtration. We also measured the success probability (that is, the probability for a positive filter output) as well as the filter sensitivity for extremely weak signal states. All these results will be presented.
We propose and experimentally demonstrate nondestructive and noiseless removal (filtering) of vacuum states from an arbitrary set of coherent states of continuous variable systems. Errors, i.e., vacuum states in the quantum information are diagnosed through a weak measurement, and on that basis, probabilistically filtered out. We consider three different filters based on on-off detection, phase stabilized, and phase randomized homodyne detection. We find that on-off detection, optimal in the ideal theoretical setting, is superior to the homodyne strategy also in a practical setting.
Non-Gaussian quantum states are critical resources in photonic quantum information processing, rendering their generation and characterization of increasing importance in quantum optics. In this work, we theoretically and numerically analyze the relative efficiency of homodyne versus heterodyne measurements for reconstructing non-Gaussian states, a major outstanding question in continuous-variable tomography. Combining a Fisher information-based formalism with simulated experiments, we find homodyne tomography to outperform heterodyne measurements for all non-Gaussian states tested, although the separation between the two modalities proves significantly narrower than suggested by the asymptotic Cramer-Rao lower bound. Our results should find use for optimizing measurement strategies in practical continuous-variable quantum systems.
Quantum state discrimination plays a central role in quantum information and communication. For the discrimination of optical quantum states, the two most widely adopted measurement techniques are photon detection, which produces discrete outcomes, and homodyne detection, which produces continuous outcomes. While various protocols using photon detection have been proposed for optimal and near-optimal discrimination between two coherent states, homodyne detection is known to have higher error rates, with its minimum achievable error rate often referred to as the Gaussian limit. In this work, we demonstrate that, despite the fundamental differences between discretely labelled and continuously labelled measurements, continuously labelled non-Gaussian measurements can also achieve near-optimal coherent state discrimination. We design two discrimination protocols that surpass the Gaussian limit: one using non-Gaussian unitary operations with homodyne detection, and another based on orthogonal polynomials. Our results show that photon detection is not required for near-optimal coherent state discrimination and that we can achieve error rates close to the Helstrom bound at low energies with continuously labelled measurements. We also find that our schemes maintain an advantage over the photon detection-based Kennedy receiver for a moderate range of coherent state amplitudes.
Standard protocols in optical communication systems employ coherent states of light as the information carriers. The quantum nature inherent to these states introduces a fundamental complexity into the decoding process. In particular, when dealing with attenuated signals, the overlap between different states precludes the possibility of perfectly discriminate them. In this study, we investigate the performance of conventional and nonconventional quantum discrimination strategies under different informational metrics. We focus our analysis on binary coherent states within the ideal case of a lossless channel. The usual homodyne receiver was studied in comparison with the Kennedy and the optimized displacement receiver. We find that nonconventional strategies employing non-Gaussian measurements surpass the conventional homodyne discrimination scheme according to measurement error probability and mutual information.
Homodyne measurement is a crucial tool widely used to address continuous variables for bosonic quantum systems. While an ideal homodyne detection provides a powerful analysis, e.g., to effectively measure quadrature amplitudes of light in quantum optics, it relies on the use of a strong reference field, the so-called local oscillator, typically in a coherent state. Such a strong coherent local oscillator may not be readily available, particularly for a massive quantum system like a Bose-Einstein condensate, posing a substantial challenge in dealing with continuous variables appropriately. It is necessary to establish a practical framework that includes the effects of nonideal local oscillators for a rigorous assessment of various quantum tests and applications. We here develop entanglement criteria beyond a Gaussian regime applicable for this realistic homodyne measurement that do not require assumptions on the state of local oscillators. We discuss the working conditions of homodyne detection to effectively detect non-Gaussian quantum entanglement under various states of local oscillators.
Digital signal processing has become essential in quantum optics, particularly for continuous-variable (CV) information encoding, enabling coherent detection schemes and mitigation of linear impairments. While linear signal processing in double homodyne detection has been studied under the assumption that all post-measurement processing can be backpropagated in the optical domain, a rigorous treatment of the digitization chain, spanning optical, electronic, and sampling stages, is still lacking. In this work, we consider the continuous mode description of double homodyne detection to fully capture the maximum mode-matching coefficient achievable as a function of electronic noise, signal bandwidth, receiver electronics bandwidth, and sampling rate, that is the entry point of digital signal processing. We establish a dimensioning rule that generalizes the Nyquist-Shannon criterion to account for quantum fluctuations of the measured signal, not merely its bandwidth. Analyzing the case of additive white electronic noise, we find numerically that optimal signal-to-noise ratio is achieved when the electronic bandwidth is large enough to pass the signal yet narrower than the sampling rate in order to mitigate noise amplification, yielding a concrete design criterion for coherent detection.