Abstract A novel approach to the quantum mechanical description of phase properties of a one‐mode low‐intensity radiation field is presented. The procedure is based upon the correspondence between Glauber states and classical waves of fixed phase ϕ and amplitude a, and, in contrast to the conventional quantum mechanical phase concepts, allows to make contact between certain operators ℰm corresponding to the classical quantities exp {imφ} (m = ± 1, ± 2, …) and realistic measurements. In the observation, a large amplification of the microscopic field by means of a linear quantum amplifier plays a decisive role. Since the amplified field is a macroscopic one, the measurement of phase is not problematic, and hence, in particular, average values «exp {imϕ}» can be determined experimentally. The main result of our analysis is that the mean values «exp {imϕ}» are equal to the quantum mechanical expectation values for the operators ℰm with respect to the field before amplification. To obtain this result it became necessary to calculate Glauber's P function for the amplified field in case of an arbitrary state for the initial field.
Using the description of the linear phase insensitive amplification of a quantum state available in the literature we prove that to every state , produced from the initial state by such amplification, there corresponds a phase space distribution , where is the Husimi function of the initial state. The scaling parameter satisfies the relation and decreases with time while, as we have shown earlier, the scaled function is again a Husimi distribution. We prove, using these facts, that if the definition of the phase insensitive amplification is physically correct then the distribution of the phase of a state is unambiguously given as the corresponding marginal distribution obtained from its Husimi distribution represented in polar coordinates.
Extending recent calculations of GLASSGOLD and HOLLIDAY [3] the amplification process by means of a laser amplifier is treated theoretically in case of an arbitrary quantum mechanical state of the incident electromagnetic field. An explicit expression for GLAUBER's P‐function representing the state of the field after amplification, is found. Interpreting this function as a classical distribution function for the complex amplitude of the field, a distribution function W(φ; t) for the phase is obtained by averaging over the real amplitude. With the help of W(φ; t) the phase uncertainty (δφ)2 for the amplified field is calculated. The result approximately agrees with the expression for(δφ)2 following from the phase operator originally introduced by HEITLER if applying it to the incident field. Thus a connection between the phase operator and an experimental arrangement is established.
In this paper, we examine measurement using the Q-based, objective-field model for quantum mechanics. Schrodinger considered a microscopic system prepared in a superposition of states which is then coupled to a macroscopic meter. We analyze the entangled meter and system, and measurements on it, by solving forward-backward stochastic differential equations for real amplitudes
x(t) and
p(t) that correspond to the phase-space variables of the Q function of the system at a time
t. We model the system and meter as single-mode fields, and measurement of
x^ by amplification of the amplitude
x(t). Our conclusion is that the outcome for the measurement is determined at (or by) the time
tm, when the coupling to the meter is complete, the meter states being macroscopically distinguishable. There is consistency with macroscopic realism. By evaluating the distribution of the amplitudes
x and
p postselected on a given outcome of the meter, we show how the
Q-based model represents a more complete description of quantum mechanics: The variances associated with amplitudes
x and
p are too narrow to comply with the uncertainty principle, ruling out that the distribution represents a quantum state. We conclude that the collapse of the wavefunction occurs as a two-stage process: First there is an amplification that creates branches of amplitudes
x(t) of the meter, associated with distinct eigenvalues. The outcome of measurement is determined by
x(t) once amplified, explaining Born's rule. Second, the distribution that determines the final collapse is the state inferred for the system conditioned on the outcome of the meter: information is lost about the meter, in particular, about the complementary variable
p.