Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)

3:1 optical frequency division by difference-frequency mixing in periodically poled lithium niobate

P. Nee, N. C. Wong

Published Nov 23, 2002• 0 citations
Publisher

Abstract

We report on the demonstration of optical frequency division by 3 via two successive stages of difference frequency generation. Two input sources at 532 nm and 798 nm generated an output at 1596 nm and the mixing between the 798-nm input and the 1596-nm output generated a second 1596-nm output. Both difference frequency mixing stages were implemented in a single piece of quasi-phase matched periodically poled lithium niobate. By measuring the beat frequency between the two 1596-nm an exact frequency ratio of 3:2 was obtained between two input sources. A signal-to-noise ratio of 27 dB was obtained for a resolution bandwidth of 100 kHz.

DOI
10.1109/freq.1997.638556

Related papers

Optical frequency division by 3 of 532??nm in periodically poled lithium niobate with a double grating

P. Nee, N. C. Wong

Optical frequency division by 3 of 532 nm is demonstrated by back-to-back difference-frequency generation in a periodically poled lithium niobate crystal with a double grating. The first grating generates 1596-nm light from 532- and 798-nm inputs, and the second grating mixes the 798-nm input and the 1596-nm output from the first grating to produce a second 1596-nm output. The beat signal between the two 1596-nm outputs is detected and frequency stabilized to yield the 3:1 frequency ratio.

Optics Letters•Jan 1, 1998•24 citations

Three-to-one optical frequency division at 532 nm using a double-grating periodically poled lithium niobate

P. Nee, N. C. Wong

Summary form only given. Optical frequency division by 3 is a critical step in realizing optical frequency counting in ultrahigh precision measurements. We report the efficient implementation of a 3:1 frequency divider by two back-to-back difference-frequency mixing (DFM) interactions using a double-grating structure in periodically poled lithium niobate (PPLN).

Conference on Lasers and Electro-Optics•Jan 1, 1998•0 citations

Ultrabroadband flattop wavelength conversion based on cascaded sum frequency generation and difference frequency generation using pump detuning in quasi-phase-matched lithium niobate waveguides

Meenu Ahlawat, Amirhossein Tehranchi, Chang Qing Xu +1 more

Flattop wavelength conversion over a 70 nm bandwidth in a 45-mm-long periodically poled lithium niobate (PPLN) waveguide based on nonlinear cascaded sum frequency generation (SFG) and difference frequency generation processes using two separated wavelengths, is realized. A 2 dB peak-to-peak ripple over the conversion bandwidth in the C band is observed when the two pumps are fixed for perfectly phase-matched SFG conversion; this is significantly reduced to 0.5 dB by slight detuning of one of the pumps to a longer wavelength. We also demonstrate multichannel broadcasting using two pumps to convert one signal wavelength to three idlers. Using the aperiodically poled lithium niobate waveguide increases the idler separation.

Applied Optics•Aug 5, 2011•11 citations

Optical-frequency balanced mixer

Jonathan R. Kurz, Krishnan R. Parameswaran, Rostislav V. Roussev +1 more

Optical signal processing devices based on quasi-phase-matched three-wave mixing and cascaded three-wave mixing in guided-wave geometries have been demonstrated to operate efficiently at practical pump-power levels. We describe operation of such devices in a balanced mode that allows mixing without wavelength offset and separation of mixed output from pump and signal input without wavelength-selective filters. We present a design for an optical-frequency balanced mixer using quasi-phase-matched, cascaded second-order nonlinear processes. Using this design, we fabricated a balanced mixer in periodically poled lithium niobate waveguides that has the expected linear and nonlinear optical performance.

Optics Letters•Aug 15, 2001•12 citations

All-Optical Wavelength Conversion Based on the Cascaded Sum and Difference Frequency Generation in a Periodically Poled Lithium-Niobate Waveguide

Jian Wang

The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.

Optics & Optoelectronic Technology•Jan 1, 2007•0 citations

Generation and Detection of Coherent Pulse Trains in Periodically Poled Lithium Niobate Through Optical Parametric Amplification

Dayen Chad Voratovic

This work reports on the generation, modulation, and detection of temporally coherent pulses in periodically-poled lithium niobate (PPLN) configured as an optical parametric amplifier (OPA).The OPA was pumped at 1 µm, by a 10 kHz, 1 ns, Nd:YAG laser.The cw seeding sources for the OPA were two separate 1550 nm lasers.One source had a short coherence length of .3km, the other a long coherence length of 95 km.The generated pulse trains where phase modulated by using a set of mirrors on a single axis motorized stage.A 10 km fiber optic delay line was used to simulate free space propagation.A homodyne, coherent optical detection system, utilizing the in-phase and quadrature components of the circularly polarized local oscillator, was built to detect the amplitude and phase modulated pulse trains.We report the detection of the modulated signal for the long coherence length source and the loss of the modulated signal for the short coherence length source, demonstrating that the OPA process can transfer the temporal coherence (or coherence length) of the input signal to the pulse-amplified signal

•Jan 1, 2011•0 citations
We report on the demonstration of optical frequency division by 3 via two successive stages of difference frequency generation. Two input sources at 532 nm and 798 nm generated an output at 1596 nm and the mixing between the 798-nm input and the 1596-nm output generated a second 1596-nm output. Both difference frequency mixing stages were implemented in a single piece of quasi-phase matched periodically poled lithium niobate. By measuring the beat frequency between the two 1596-nm an exact frequency ratio of 3:2 was obtained between two input sources. A signal-to-noise ratio of 27 dB was obtained for a resolution bandwidth of 100 kHz.
Flattop wavelength conversion over a 70 nm bandwidth in a 45-mm-long periodically poled lithium niobate (PPLN) waveguide based on nonlinear cascaded sum frequency generation (SFG) and difference frequency generation processes using two separated wavelengths, is realized. A 2 dB peak-to-peak ripple over the conversion bandwidth in the C band is observed when the two pumps are fixed for perfectly phase-matched SFG conversion; this is significantly reduced to 0.5 dB by slight detuning of one of the pumps to a longer wavelength. We also demonstrate multichannel broadcasting using two pumps to convert one signal wavelength to three idlers. Using the aperiodically poled lithium niobate waveguide increases the idler separation.
Optical signal processing devices based on quasi-phase-matched three-wave mixing and cascaded three-wave mixing in guided-wave geometries have been demonstrated to operate efficiently at practical pump-power levels. We describe operation of such devices in a balanced mode that allows mixing without wavelength offset and separation of mixed output from pump and signal input without wavelength-selective filters. We present a design for an optical-frequency balanced mixer using quasi-phase-matched, cascaded second-order nonlinear processes. Using this design, we fabricated a balanced mixer in periodically poled lithium niobate waveguides that has the expected linear and nonlinear optical performance.
The principle of all-optical wavelength conversion based on the cascaded sum and difference frequency generation (SFG+DFG) in quasi-phase-matched (QPM) periodically poled LiNbO3 (PPLN) waveguides is introduced. The conversion efficiency of the wavelength converter is calculated. The influences of the powers and span of two pumps on the conversion efficiency are analyzed. Bandwidth of one pump wavelength is discussed. The tuning is about 0.5 nm. The signal pulse width is compressed about 0.68 times.
This work reports on the generation, modulation, and detection of temporally coherent pulses in periodically-poled lithium niobate (PPLN) configured as an optical parametric amplifier (OPA).The OPA was pumped at 1 µm, by a 10 kHz, 1 ns, Nd:YAG laser.The cw seeding sources for the OPA were two separate 1550 nm lasers.One source had a short coherence length of .3km, the other a long coherence length of 95 km.The generated pulse trains where phase modulated by using a set of mirrors on a single axis motorized stage.A 10 km fiber optic delay line was used to simulate free space propagation.A homodyne, coherent optical detection system, utilizing the in-phase and quadrature components of the circularly polarized local oscillator, was built to detect the amplitude and phase modulated pulse trains.We report the detection of the modulated signal for the long coherence length source and the loss of the modulated signal for the short coherence length source, demonstrating that the OPA process can transfer the temporal coherence (or coherence length) of the input signal to the pulse-amplified signal