Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Circuits and Systems proceedings

Kinetic-inductance based superconducting microwave circuits: filters, couplers, and other components

J.M. Pond, Kenneth R. Carroll

Published Jan 2, 2003• 0 citations
Publisher

Abstract

It is pointed out that superconducting microstrip transmission lines operating in the kinetic-inductance limit have the potential to reduce the size and weight of microwave circuits by several orders of magnitude. Since the phase velocity of these guided wave structures is up to a hundred times less than in free space, the electrical length of distributed elements is similarly reduced. Simple transmission lines have been fabricated from both low- and high-transition-temperature superconductors while more complicated circuits, such as filters, with a good match to 50- Omega coax have been fabricated with the low-transition-temperature superconductors. Also, a novel coupled-line topology, compatible with these structures, has been studied analytically.>

DOI
10.1109/iscas.1992.230103

Related papers

Kinetic inductance as a microwave circuit design variable by multilayer fabrication

A. A. Adamyan, Sebastian E. de Graaf, Sergey Kubatkin +1 more

Abstract We report on the development of a reliable NbN/Al/Nb/NbN multilayer fabrication technique for combining design elements with and without kinetic inductance in superconducting microwave circuits. As a proof-of-concept we demonstrate the application of the proposed technique to build a slow microwave propagation line matched to 50 Ω terminals. Fabrication details along with the design and measurements are discussed. At 8 GHz the presented device operates as a dc controllable full-turn phase shifter. We suggest that by exploiting the kinetic inductance as a design variable one can greatly improve operation parameters for a variety of standard microwave designs such as step-impedance filters and resonators.

Superconductor Science and Technology•Jul 1, 2015•7 citations

Measurements and Modeling of Kinetic Inductance Microstrip Delay Lines

J.M. Pond, J. H. Claassen, William L. Carter

Superconducting microstrip, with phase velocities of about 0.01c, employing kinetic inductance have been fabricated using niobium nitride and a silicon dielectric. Delay lines using this phenomenon have several advantages for analog signal processing, including low loss and very compact size. Measurements of kinetic inductance microstrip delay lines were made in the frequency domain and the time domain. The results were compared to theoretical predictions and an accurate circuit model was developed. The circuit model was used to determine the frequency- and temperature-dependent losses of the delay line.

IEEE Transactions on Microwave Theory and Techniques•Dec 1, 1987•51 citations

Scalability of Superconductor Electronics: Limitations Imposed by AC Clock and Flux Bias Transformers

Sergey K. Tolpygo

Flux transformers are the necessary component of all superconductor digital integrated circuits utilizing flux biasing and ac power excitation and clocking of logic cells, e.g., adiabatic quantum flux parametron (AQFP), reciprocal quantum logic (RQL), superconducting sensor arrays, qubits, etc. On average, one transformer is required per one Josephson junction. We consider limitations to the integration scale (device number density) imposed by the critical current of the ac power transmission lines (primary of the transformers) and cross-coupling between the adjacent transformers. The former sets the minimum linewidth and the mutual coupling length in the transformer, whereas the latter sets the minimum spacing between the transformers. Decreasing linewidth of superconducting (Nb) wires increases kinetic inductance of the transformer's secondary, decreasing its length and mutual coupling to the primary. This limits the minimum size. As a result, there is a minimum linewidth${{\boldsymbol{w}}}_{\mathbf{min}}\sim $100 nm, which determines the maximum achievable scale of integration. Using AQFP circuits as an example, we calculate dependences of the AQFP number density on linewidth for various types of microstrip-based and stripline-based transformers and inductors available in the SFQ5ee fabrication process developed at MIT Lincoln Laboratory, and estimate the maximum circuit density as a few million AQFPs per cm2. We propose an advanced fabrication process for a 10× increase in the density of AQFP and other ac-powered circuits. In this process, inductors are formed from a patterned bilayer of a geometrical inductance material, Nb, deposited over a layer of high kinetic inductance material, e.g., NbN. Individual pattering of the bilayer layers allows to create stripline inductors in a wide range of inductances, from the low values typical to Nb striplines to the high values typical for NbN thin films, and preserve sufficient mutual coupling in stripline transformers with extremely low cross-talk. Energy efficiency of ac-powered circuits is limited by dielectric losses in the ac power transmissions lines. Problems of scaling associated with multiphase ac power distribution are discussed.

arXiv:2210.02632•IEEE Transactions on Applied Superconductivity•Dec 19, 2022•11 citations

A tunable coupler for superconducting microwave resonators using a nonlinear kinetic inductance transmission line

Clint Bockstiegel, Yiwen Wang, Michael R. Vissers +4 more

We present a tunable coupler scheme that allows us to tune the coupling strength between a feedline and a superconducting resonator in situ over a wide range. In this scheme, we shunt the feedline with a 50-Ω lumped-element nonlinear transmission line made from a 20 nm NbTiN film. By injecting a DC current, the nonlinear kinetic inductance changes and the effective impedance shunting the resonator periodically varies from a short to an open, which tunes the coupling strength and coupling quality factor Qc. We have demonstrated Qc tuning over a factor of 40, between Qc∼5.5×104 and Qc∼2.3×106, for a 4.5 GHz resonator by applying a DC current less than 3.3 mA. Our tunable coupler scheme is easy to implement and may find broad applications in superconducting detector and quantum computing/information experiments.

Applied Physics Letters•May 30, 2016•29 citations

Compact itinerant microwave photonics with superconducting high-kinetic inductance microstrips

Samuel Goldstein, Guy Pardo, Naftali Kirsh +5 more

Abstract Microwave photonics is a remarkably powerful system for quantum simulation and technologies, but its integration in superconducting circuits, superior in many aspects, is constrained by the long wavelengths and impedance mismatches in this platform. We introduce a solution to these difficulties via compact networks of high-kinetic inductance microstrip waveguides and coupling wires with strongly reduced phase velocities. We demonstrate broadband capabilities for superconducting microwave photonics in terms of routing, emulation and generalized linear and nonlinear networks.

arXiv:2106.15951•New Journal of Physics•Dec 22, 2021•2 citations

Microwave Photos in High Impedance Transmission line: Dispersion, Disorder and Localization

Mehta, Nitish Jitendrakumar

In this thesis we will describe the theoretical and experimental studies of a TEM on-chip superconducting transmission line with a wave impedance as high as 20 $\mathrm{k}\Omega$, phase and group velocity of waves simultaneously reduced by a factor of 100 in a broad range of frequencies from 0 to about 10 $\mathrm{GHz}$. A conventional microwave coaxial transmission line gets its inductance and capacitance from magnetic and electric fields stored in the space between its inner and outer conductors. This in turn limits its impedance to around 50 $\Omega$ and group velocity of waves very close to the speed of light in vacuum. In this work we are able to increase the impedance by over two orders of magnitude and reduce the group and phase velocity of waves by over two orders of magnitude as well, by constructing a coplanar transmission line out of a pair of long Al/AlOx/Al Josephson tunnel junction chains. A Josephson junction gets its inductance not from the magnetic energy but rather from the much larger kinetic energy of tunneling Cooper pairs, which is unrelated to the electromagnetic properties of vacuum. In this work we present a design of such a transmission line and low-temperature measurement of its dispersion relation. We then study and characterize the disorder present in the circuit parameters of our system and using this, we conclude that for frequencies up to 12 GHz, there is no evidence of Anderson localization of waves, even for chains exceeding 30,000 junctions. Low dissipation and absence of localization make this transmission line ideal for use in various experiments where high impedance can enable strong coupling between light and matter.

Theory of Computing Systems•Jan 1, 2017•0 citations
It is pointed out that superconducting microstrip transmission lines operating in the kinetic-inductance limit have the potential to reduce the size and weight of microwave circuits by several orders of magnitude. Since the phase velocity of these guided wave structures is up to a hundred times less than in free space, the electrical length of distributed elements is similarly reduced. Simple transmission lines have been fabricated from both low- and high-transition-temperature superconductors while more complicated circuits, such as filters, with a good match to 50- Omega coax have been fabricated with the low-transition-temperature superconductors. Also, a novel coupled-line topology, compatible with these structures, has been studied analytically.>
Abstract We report on the development of a reliable NbN/Al/Nb/NbN multilayer fabrication technique for combining design elements with and without kinetic inductance in superconducting microwave circuits. As a proof-of-concept we demonstrate the application of the proposed technique to build a slow microwave propagation line matched to 50 Ω terminals. Fabrication details along with the design and measurements are discussed. At 8 GHz the presented device operates as a dc controllable full-turn phase shifter. We suggest that by exploiting the kinetic inductance as a design variable one can greatly improve operation parameters for a variety of standard microwave designs such as step-impedance filters and resonators.
Superconducting microstrip, with phase velocities of about 0.01c, employing kinetic inductance have been fabricated using niobium nitride and a silicon dielectric. Delay lines using this phenomenon have several advantages for analog signal processing, including low loss and very compact size. Measurements of kinetic inductance microstrip delay lines were made in the frequency domain and the time domain. The results were compared to theoretical predictions and an accurate circuit model was developed. The circuit model was used to determine the frequency- and temperature-dependent losses of the delay line.
Flux transformers are the necessary component of all superconductor digital integrated circuits utilizing flux biasing and ac power excitation and clocking of logic cells, e.g., adiabatic quantum flux parametron (AQFP), reciprocal quantum logic (RQL), superconducting sensor arrays, qubits, etc. On average, one transformer is required per one Josephson junction. We consider limitations to the integration scale (device number density) imposed by the critical current of the ac power transmission lines (primary of the transformers) and cross-coupling between the adjacent transformers. The former sets the minimum linewidth and the mutual coupling length in the transformer, whereas the latter sets the minimum spacing between the transformers. Decreasing linewidth of superconducting (Nb) wires increases kinetic inductance of the transformer's secondary, decreasing its length and mutual coupling to the primary. This limits the minimum size. As a result, there is a minimum linewidth${{\boldsymbol{w}}}_{\mathbf{min}}\sim $100 nm, which determines the maximum achievable scale of integration. Using AQFP circuits as an example, we calculate dependences of the AQFP number density on linewidth for various types of microstrip-based and stripline-based transformers and inductors available in the SFQ5ee fabrication process developed at MIT Lincoln Laboratory, and estimate the maximum circuit density as a few million AQFPs per cm2. We propose an advanced fabrication process for a 10× increase in the density of AQFP and other ac-powered circuits. In this process, inductors are formed from a patterned bilayer of a geometrical inductance material, Nb, deposited over a layer of high kinetic inductance material, e.g., NbN. Individual pattering of the bilayer layers allows to create stripline inductors in a wide range of inductances, from the low values typical to Nb striplines to the high values typical for NbN thin films, and preserve sufficient mutual coupling in stripline transformers with extremely low cross-talk. Energy efficiency of ac-powered circuits is limited by dielectric losses in the ac power transmissions lines. Problems of scaling associated with multiphase ac power distribution are discussed.
We present a tunable coupler scheme that allows us to tune the coupling strength between a feedline and a superconducting resonator in situ over a wide range. In this scheme, we shunt the feedline with a 50-Ω lumped-element nonlinear transmission line made from a 20 nm NbTiN film. By injecting a DC current, the nonlinear kinetic inductance changes and the effective impedance shunting the resonator periodically varies from a short to an open, which tunes the coupling strength and coupling quality factor Qc. We have demonstrated Qc tuning over a factor of 40, between Qc∼5.5×104 and Qc∼2.3×106, for a 4.5 GHz resonator by applying a DC current less than 3.3 mA. Our tunable coupler scheme is easy to implement and may find broad applications in superconducting detector and quantum computing/information experiments.
Abstract Microwave photonics is a remarkably powerful system for quantum simulation and technologies, but its integration in superconducting circuits, superior in many aspects, is constrained by the long wavelengths and impedance mismatches in this platform. We introduce a solution to these difficulties via compact networks of high-kinetic inductance microstrip waveguides and coupling wires with strongly reduced phase velocities. We demonstrate broadband capabilities for superconducting microwave photonics in terms of routing, emulation and generalized linear and nonlinear networks.
In this thesis we will describe the theoretical and experimental studies of a TEM on-chip superconducting transmission line with a wave impedance as high as 20 kΩ\mathrm{k}\OmegakΩ, phase and group velocity of waves simultaneously reduced by a factor of 100 in a broad range of frequencies from 0 to about 10 GHz\mathrm{GHz}GHz. A conventional microwave coaxial transmission line gets its inductance and capacitance from magnetic and electric fields stored in the space between its inner and outer conductors. This in turn limits its impedance to around 50 Ω\OmegaΩ and group velocity of waves very close to the speed of light in vacuum. In this work we are able to increase the impedance by over two orders of magnitude and reduce the group and phase velocity of waves by over two orders of magnitude as well, by constructing a coplanar transmission line out of a pair of long Al/AlOx/Al Josephson tunnel junction chains. A Josephson junction gets its inductance not from the magnetic energy but rather from the much larger kinetic energy of tunneling Cooper pairs, which is unrelated to the electromagnetic properties of vacuum. In this work we present a design of such a transmission line and low-temperature measurement of its dispersion relation. We then study and characterize the disorder present in the circuit parameters of our system and using this, we conclude that for frequencies up to 12 GHz, there is no evidence of Anderson localization of waves, even for chains exceeding 30,000 junctions. Low dissipation and absence of localization make this transmission line ideal for use in various experiments where high impedance can enable strong coupling between light and matter.