Cooling and Trapping neutral particles or ions using laser beam becomes a new research field inPhysics. This field was started in 1970’s by Ashkin who demonstrated that a focused laser beam ondielectric particles in a glass cell can attract the particles to the focal area because the potenstialenergy there is lower. Cooling which means to reduce the average thermal velocity of atoms orparticles and trapping which means controlling the positions of the atoms can be performed using twokinds of forces from Laser beam i.e. scattering force and gradient force. A scattering force is resultedfrom the laser beam because the laser beam contains fotons which have momentum. The gradientforce appears because of the gradient of intensity around focal area. One of famous atom traps isMagneto-Optical Trap (MOT). MOT uses Doppler effect for cooling and Zeeman effect for trappingWith this technique, cold atoms with temperature in the order of mikro Kelvin can be produced. Coldatom can be used for many applications such as to make Bose Einstein Condensate (BEC), atominterfermetry and atomic clocks.
Cooling and Trapping neutral particles or ions using laser beam becomes a new research field inPhysics. This field was started in 1970’s by Ashkin who demonstrated that a focused laser beam ondielectric particles in a glass cell can attract the particles to the focal area because the potenstialenergy there is lower. Cooling which means to reduce the average thermal velocity of atoms orparticles and trapping which means controlling the positions of the atoms can be performed using twokinds of forces from Laser beam i.e. scattering force and gradient force. A scattering force is resultedfrom the laser beam because the laser beam contains fotons which have momentum. The gradientforce appears because of the gradient of intensity around focal area. One of famous atom traps isMagneto-Optical Trap (MOT). MOT uses Doppler effect for cooling and Zeeman effect for trappingWith this technique, cold atoms with temperature in the order of mikro Kelvin can be produced. Coldatom can be used for many applications such as to make Bose Einstein Condensate (BEC), atominterfermetry and atomic clocks.
The advent of the laser opened the way to the development of powerful new methods for manipulating and cooling atoms which were exploited in the realization of Bose–Einstein condensation in alkali atom vapours. To set the stage we describe a typical experiment, which is shown schematically in Fig. 4.1. A beam of sodium atoms emerges from an oven at a temperature of about 600 K, corresponding to a speed of about 800 m s –1 , and is then passed through a so-called Zeeman slower, in which the velocity of the atoms is reduced to about 30 m s –1 , corresponding to a temperature of about 1 K. In the Zeeman slower, a laser beam propagates in the direction opposite that of the atomic beam, and the radiation force produced by absorption of photons retards the atoms. Due to the Doppler effect, the frequency of the atomic transition in the laboratory frame is not generally constant, since the atomic velocity varies. However, by applying an inhomogeneous magnetic field designed so that the Doppler and Zeeman effects cancel, the frequency of the transition in the rest frame of the atom may be held fixed. On emerging from the Zeeman slower the atoms are slow enough to be captured by a magneto-optical trap (MOT), where they are further cooled by interactions with laser light to temperatures of order 100 μK. Another way of compensating for the changing Doppler shift is to increase the laser frequency in time, which is referred to as ‘chirping’. In other experiments the MOT is filled by transferring atoms from a second MOT where atoms are captured directly from the vapour.
The advent of the laser opened the way to the development of powerful methods for producing and manipulating cold atomic gases. To set the stage we describe a typical experiment, which is shown schematically in Fig. 4.1. A beam of sodium atoms emerges from an oven at a temperature of about 600 K, corresponding to a speed of about 800 m s −1 , and is then passed through a so-called Zeeman slower, in which the velocity of the atoms is reduced to about 30 m s −1 , corresponding to a temperature of about 1 K. In the Zeeman slower, a laser beam propagates in the direction opposite that of the atomic beam, and the radiation force produced by absorption of photons retards the atoms. Due to the Doppler effect, the frequency of the atomic transition in the laboratory frame is not generally constant, since the atomic velocity varies. However, by applying an inhomogeneous magnetic field designed so that the Doppler and Zeeman effects cancel, the frequency of the transition in the rest frame of the atom may be held fixed. On emerging from the Zeeman slower the atoms are slow enough to be captured by a magneto-optical trap (MOT), where they are further cooled by interactions with laser light to temperatures of order 100 μK. Another way of compensating for the changing Doppler shift is to increase the laser frequency in time, which is referred to as ‘chirping’.
We present a simple review of the basic physical processes allowing one to control, with laser beams, the velocity and the position of neutral atoms. The control of the velocity corresponds to a cooling of atoms, that is, a reduction of the atomic velocity spread around a given value. The control of the position means a trapping of atoms in real space. The best present performances will be given, in terms of the lowest temperatures and the highest densities. The corresponding highest quantum degeneracy will also be estimated. It is imposed by fundamental limits, which will be described briefly. We also give the general trends in this field of research and outline the new directions which look promising for observing quantum statistical effects in laser cooled atomic samples, but which are for the moment restricted by unsolved problems. Introducing the Simple Schemes The radiative forces acting on atoms in a light field can be split into two parts, a reactive one and a dissipative one. The dissipative force (radiation pressure), which basically involves scattering processes, is velocity dependent. We will see that this dependence leads to the Doppler cooling scheme and to the concept of optical molasses, and we will give the corresponding minimal achievable temperature. The dissipative force can be made position dependent, through a gradient of the magnetic field, so that the atoms are also trapped in the so-called magneto-optical trap.
Of the many applications of lasers, the one with possibly the most dramatic impact on fundamental physics is laser cooling and trapping: the Nobel Prize for physics was awarded for laser cooling in 1997. Laser cooling allows one to obtain samples of atoms essentially at rest, with temperatures in the micro-Kelvin region being routine. At such low temperatures, it becomes easy to trap or move atoms with modest electromagnetic forces and a whole new class of experiments previously confined to the realm of fantasy becomes possible. The high brightness of masers and lasers makes it possible to access a regime of atomic excitation for which Einstein’s rate equations are inadequate. Three-dimensional optical molasses using counter-propagating laser beams along three mutually orthogonal directions was first observed in 1985 by Chu et al. The Sisyphus mechanism works well for atoms that are already cold and has a smaller capture velocity than conventional Doppler cooling.
It is well known that a light beam carries momentum and that the scattering of light by an object produces a force. This property of light was first demonstrated by Frish [139] through the observation of a very small transverse deflection (3 × 10–5 rad) in a sodium atomic beam exposed to light from a resonance lamp. With the invention of the laser, it became easier to observe effects of this kind because the strength of the force is greatly enhanced by the use of intense and highly directional light fields, as demonstrated by Ashkin [20, 21] with the manipulation of transparent dielectric spheres suspended in water. The results obtained by Frish and Ashkin raised the possibility of using light forces to control the motion of neutral atoms. Although the understanding of light forces acting on atoms was already established by the end of the 1970s, unambiguous demonstration of atom cooling and trapping was not accomplished before the mid 1980s. In this section we discuss some fundamental aspects of light forces and schemes employed to cool and trap neutral atoms.