Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Nearly noiseless amplification of microwave signals with a Josephson parametric amplifier

Manuel A. Castellanos-Beltran

Published Mar 17, 2009• 0 citations
OpenAlex

Related papers

Broadband squeezed microwaves and amplification with a Josephson travelling-wave parametric amplifier

Jack Y. Qiu, Arne L. Grimsmo, Kaidong Peng +16 more

arXiv:2201.11261•Nature Physics•Feb 9, 2023•97 citations

Hysteretic Flux Response and Nondegenerate Gain of Flux-Driven Josephson Parametric Amplifiers

Stefan Pogorzalek, Kirill G. Fedorov, L. Zhong +11 more

For quantum information processing with superconducting circuits, efficient amplification of weak microwave signals is often required. For this purpose, Josephson parametric amplifiers (JPAs) are commonly used, due to their quantum-limited noise performance. The authors show that flux-driven JPAs exhibit hysteresis, even for negligible screening parameters, and that their amplification properties depend strongly on the resonator characteristics. These phenomena are important for a full understanding of the magnetic field response and parametric amplification in JPAs, and thus their application.

arXiv:1609.09041•Physical Review Applied•Aug 17, 2017•41 citations

Parametric amplification with the Cavity Josephson Amplifier

Etienne Boaknin, Rajamani Vijay, Michael Metcalfe +3 more

Bulletin of the American Physical Society•Mar 16, 2006•0 citations

Parametric amplification in a Josephson junction array Fabry-Pérot cavity

Javier Navarro Montilla, Nikita S. Klimovich, A. Barbier +2 more

Abstract Superconducting Parametric Amplifiers (SPAs) with near-quantum-limited added noise are crucial for weak signal detection applications such as astronomical receivers, quantum computation, and fundamental physics experiments. Commercially available SPAs include Josephson Parametric Amplifiers (JPAs), which offer high gain but narrow bandwidth performance; and Josephson-junction Travelling Wave Parametric Amplifiers (JTWPAs), which provide broader bandwidth at the cost of a complicated fabrication procedure, lower fabrication yield, and larger footprint area. In this paper, we investigate the parametric amplification of microwave signals in a Josephson array embedded in a low-Q Fabry-Pérot cavity. We fabricated a 500-junction array device and measured >15 dB phase-preserving gain over a ∼350 MHz bandwidth, while offering almost two orders of magnitude improvement in compression point (P 1dB = −106.2 dBm) compared to standard JPAs. Furthermore, using a novel measurement technique, we configured our device to operate in the phase-sensitive mode, measuring a phase-sensitive extinction ratio (PSER) of 42.3 ± 2.81 dB, in line with state-of-the-art values for JPAs. These promising performances, combined with the ease of fabrication and improved yield compared with JTWPAs, underscore the potential of these devices for applications in advanced detection schemes.

Physica Scripta•Sep 1, 2025•1 citation

PARAMETRIC AMPLIFICATION OF MICROWAVES IN SUPERCONDUCTING JOSEPHSON TUNNEL JUNCTIONS

Hans Zimmer

Applied Physics Letters•Apr 1, 1967•84 citations

Phase-sensitive cascade quantum amplifier with nearly noiseless operation

Ilari Lilja, Ekaterina Mukhanova, Michael Perelshtein +5 more

Phase-sensitive parametric devices enable quadrature-selective amplification with the potential for sub-quantum-limited noise performance. In this work, we investigate the operation of a SQUID-based Josephson Parametric Amplifier (JPA), comparing its performance in the phase-preserving and phase-sensitive regimes. The device, fabricated using VTT SWAPS technology, is driven in a three-wave mixing configuration and characterized in a reflection-based measurement setup at millikelvin temperatures. To directly probe the noise performance at low JPA gains, we employ a cascaded amplification scheme in which a Traveling-Wave Parametric Amplifier (TWPA) provides low-noise pre-amplification of the JPA output. In a phase-preserving operation, the JPA exhibits near-quantum-limited performance with a system noise temperature of $351\pm53$ mK at 6 GHz. In contrast, phase-sensitive operation yields a minimum system noise temperature of $94\pm12$ mK, well below the standard quantum limit of 288 mK. Our results demonstrate that a JPA-TWPA amplifier cascade opens the door to direct, high-fidelity probing of quantum devices without the need for background noise subtraction.

quant-pharXiv:2608.25645•Journal of Low Temperature Physics•Aug 27, 2026•0 citations
For quantum information processing with superconducting circuits, efficient amplification of weak microwave signals is often required. For this purpose, Josephson parametric amplifiers (JPAs) are commonly used, due to their quantum-limited noise performance. The authors show that flux-driven JPAs exhibit hysteresis, even for negligible screening parameters, and that their amplification properties depend strongly on the resonator characteristics. These phenomena are important for a full understanding of the magnetic field response and parametric amplification in JPAs, and thus their application.
Abstract Superconducting Parametric Amplifiers (SPAs) with near-quantum-limited added noise are crucial for weak signal detection applications such as astronomical receivers, quantum computation, and fundamental physics experiments. Commercially available SPAs include Josephson Parametric Amplifiers (JPAs), which offer high gain but narrow bandwidth performance; and Josephson-junction Travelling Wave Parametric Amplifiers (JTWPAs), which provide broader bandwidth at the cost of a complicated fabrication procedure, lower fabrication yield, and larger footprint area. In this paper, we investigate the parametric amplification of microwave signals in a Josephson array embedded in a low-Q Fabry-Pérot cavity. We fabricated a 500-junction array device and measured >15 dB phase-preserving gain over a ∼350 MHz bandwidth, while offering almost two orders of magnitude improvement in compression point (P 1dB = −106.2 dBm) compared to standard JPAs. Furthermore, using a novel measurement technique, we configured our device to operate in the phase-sensitive mode, measuring a phase-sensitive extinction ratio (PSER) of 42.3 ± 2.81 dB, in line with state-of-the-art values for JPAs. These promising performances, combined with the ease of fabrication and improved yield compared with JTWPAs, underscore the potential of these devices for applications in advanced detection schemes.
Phase-sensitive parametric devices enable quadrature-selective amplification with the potential for sub-quantum-limited noise performance. In this work, we investigate the operation of a SQUID-based Josephson Parametric Amplifier (JPA), comparing its performance in the phase-preserving and phase-sensitive regimes. The device, fabricated using VTT SWAPS technology, is driven in a three-wave mixing configuration and characterized in a reflection-based measurement setup at millikelvin temperatures. To directly probe the noise performance at low JPA gains, we employ a cascaded amplification scheme in which a Traveling-Wave Parametric Amplifier (TWPA) provides low-noise pre-amplification of the JPA output. In a phase-preserving operation, the JPA exhibits near-quantum-limited performance with a system noise temperature of 351±53351\pm53351±53 mK at 6 GHz. In contrast, phase-sensitive operation yields a minimum system noise temperature of 94±1294\pm1294±12 mK, well below the standard quantum limit of 288 mK. Our results demonstrate that a JPA-TWPA amplifier cascade opens the door to direct, high-fidelity probing of quantum devices without the need for background noise subtraction.